To reveal quality change rules and establish the predicting model of konjac vacuum drying, a response surface methodology was adopted to optimize and analyze the vacuum drying process, while an artificial neural network (ANN) was applied to model the drying process and compare with the response surface methodology (RSM) model. The different material thickness (MT) of konjac samples (2, 4 and 6mm) were dehydrated at temperatures (DT) of 50, 60 and 70 °C with vacuum degrees (DV) of 0.04, 0.05 and 0.06 MPa, followed by Box–Behnken design. Dehydrated samples were analyzed for drying time (t), konjac glucomannan content (KGM) and whiteness index (WI). The results showed that the DT and MT should be, respectively, under 60 °C and 4 mm for quality and efficiency purposes. Optimal conditions were found to be: DT of 60.34 °C; DV of 0.06 MPa and MT of 2 mm, and the corresponding responses t, KGM and WI were 5 h, 61.96% and 82, respectively. Moreover, a 3-10-3 ANN model was established to compare with three second order polynomial models established by the RSM, the result showed that the RSM models were superior in predicting capacity (R2 > 0.928; MSE < 1.46; MAE < 1.04; RMSE < 1.21) than the ANN model. The main results may provide some theoretical and technical basis for the konjac vacuum drying and the designing of related equipment.
A study on the energy and exergy of Ohmic heating (OH) process of sour orange juice using an artificial neural network (ANN) and response surface methodology (RSM)
