Properties of tribofilm formed on self‐mated stainless steel lubricated by palm methyl ester mixed petroleum diesel fuel

2021 ◽  
Author(s):  
Zahrul Fuadi ◽  
Koshi Adachi

2015 ◽  
Vol 758 ◽  
pp. 107-111
Author(s):  
Tadjuddin Muhammad ◽  
Zahrul Fuadi ◽  
Khalil Fazmi ◽  
Husaini Husaini

The used of palm-biodiesel fuel in automotive industry is increasing rapidly nowadays. Among the reasons are high efficiency modern fuel injection system of diesel engines and the shortage of petroleum diesel fuel from fossil resources. Among the parts affected by the fuel switch are fuel pumps components, including the fuel injection needle. Those components, working under the lubrication environment of the fuel, have to be prevented from excessive wear to maintain their high performances. This paper discussed the wear characteristics of stainless steel 304 sliding against cast iron under the lubrication environment of palm-biodiesel fuel with the concentration of 7.5% palm methyl ester in the petroleum diesel fuel. The material pair is chosen because of their widely used as mechanical components. The tests were conducted using a ball on disk tribometer. The results show that wear of the stainless steel ball is smaller in the environment with the presence of palm methyl ester content in the diesel fuel compared to that in the environment without the presence of the palm methyl ester content. The results suggested that palm-biodiesel fuel is favorable in decreasing the wear of the material.



1985 ◽  
Vol 4 ◽  
pp. 207-215 ◽  
Author(s):  
Martin Mittelbach ◽  
Peter Tritthart ◽  
Hans Junek


2016 ◽  
Vol 90 ◽  
pp. 01080 ◽  
Author(s):  
Norhidayah Mat Taib ◽  
Mohd Radzi Abu Mansor ◽  
Wan Mohd Faizal Wan Mahmood ◽  
Fais Ahmad Shah ◽  
Nik Rosli Nik Abdullah


2018 ◽  
Vol 66 (3) ◽  
Author(s):  
Zahrul Fuadi ◽  
Koshi Adachi ◽  
Tadjuddin Muhammad


Biofuels derived from vegetable oils are known to be promising alternative fuels for diesel engines. The possibility of using mixtures of petroleum diesel fuel with rapeseed oil and rapeseed oil methyl ester as environmentally friendly motor fuels is considered. The practicability of changing the composition of these mixtures in accordance with the engine operating mode is shown. A technique for multicriteria optimization of the composition of such mixed biofuels is suggested. The basic characteristics of the optimal composition of these mixed biofuels are calculated. A device for regulating fuel’s composition is proposed. The basic characteristic of regulation of the blended biofuel composition realized by the device is presented. Keywords diesel engine; combustion chamber; oil diesel fuel; rapeseed oil; rapeseed oil methyl ester; biofuel mixture; ecological characteristics; exhaust gases toxicity



1993 ◽  
Vol 14 (4) ◽  
pp. 195-218 ◽  
Author(s):  
M. Devitt ◽  
D. W. Drysdale ◽  
I. MacGillivray ◽  
A. J. Norris ◽  
R. Thompson ◽  
...  
Keyword(s):  


Author(s):  
Amarlo Banania ◽  
Edwin N. Quiros ◽  
Jose Gabriel E. Mercado

Abstract Continuous demand for energy in order to provide to an ever-increasing global population calls for use of or integration of other alternative sources of fuel other than fossil fuels. Many countries all over the world use vegetable oils blended with neat diesel as alternative and using these biofuels can help alleviate lessen the emissions releases on the environment as well as the country’s dependency on fossil fuels. In the Philippines Coconut Methyl Ester (CME) is the primary vegetable oil used, however in this study we used four other vegetable oils which are RCO (Refined Corn Oil), RPO (Refine Palm Oil), JFO (Jahtropa Filtered Oil) and JME (Jathropa Methyl Ester) in order to investigate the possibility of their use in diesel engines. A 6.3 kW single-cylinder, four stroke cycle, direct injection engine was used for the study. This kind of engine is typically used in the Philippines for different purposes such as backup power for households, for boats, pumps and for agriculture use. The specific fuel consumption of the biodiesel blends compared to neat diesel fuel ranged from −15% to 15% with RCO and JME having higher SFC and JFO and RPO having lower SFC. Fuel conversion efficiency of the varied from −12% to 12% with JFO and RPO having higher efficiency and RCO and JME having lower efficiency. The power of the varied from −7% to 6% with RPO having lower power output, JFO having higher power output and JME and RCO having similar power output to neat diesel fuel. At full load condasition Neat Diesel Fuel blended with 15% Refined Palm Oil showed the greatest improvement in SFC while Neat Diesel Fuel blended with 10% Jathropa Filtered Oil showed the best power output.



Sign in / Sign up

Export Citation Format

Share Document