Nano‐silica/chitosan composite coatings on biodegradable magnesium alloys for enhanced corrosion resistance in simulated body fluid

2021 ◽  
Author(s):  
Yucong Ma ◽  
Mohd Talha ◽  
Qi Wang ◽  
Qian Zhao ◽  
Zhonghui Li ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Simulated Body Fluid ◽  
Magnesium Alloys ◽  
Body Fluid ◽  
Composite Coatings ◽  
Nano Silica ◽  
Biodegradable Magnesium ◽  
Chitosan Composite

Microstructural Changes of AZ31 Magnesium Alloys Induced by Cryogenic Machining and Its Influence on Corrosion Resistance in Simulated Body Fluid for Biomedical Applications

2010 ◽  
Author(s):  
Z. Pu ◽  
O. W. Dillon ◽  
I. S. Jawahir ◽  
D. A. Puleo
Keyword(s):  
Corrosion Resistance ◽  
Simulated Body Fluid ◽  
Magnesium Alloys ◽  
Body Fluid ◽  
Bulk Material ◽  
White Layer ◽  
Cutting Speed ◽  
Mg Alloy ◽  
Cryogenic Machining ◽  
Az31 Mg Alloy

Poor corrosion resistance is one of the major disadvantages of magnesium alloys that inhibits their wide application. It was reported frequently that the alloys’ microstructure has a significant influence on their corrosion resistance. In this study, cryogenic machining is used as a severe plastic deformation tool to modify the surface and subsurface microstructures of an AZ31 Mg alloy. Liquid nitrogen is applied to suppress grain growth caused by large heat generation during machining. “White layers”, where grain boundaries were invisible, were shown to form on the surface and subsurface after machining. The hardness of this layer was about 60% larger than the bulk material. The tool edge radius and the cutting speed have profound influence on the microstructures. Preliminary results from immersion tests in simulated body fluid showed that the corrosion resistance of the AZ31 Mg alloy was enhanced due to the formation of white layer.

scholarly journals Preparation and Degradation Characteristics of MAO/APS Composite Bio-Coating in Simulated Body Fluid

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 667
Author(s):  
Zexin Wang ◽  
Fei Ye ◽  
Liangyu Chen ◽  
Weigang Lv ◽  
Zhengyi Zhang ◽  
...  
Keyword(s):  
Simulated Body Fluid ◽  
Composite Coating ◽  
Body Fluid ◽  
Composite Coatings ◽  
Degradation Process ◽  
Ceramic Coatings ◽  
Immersion Test ◽  
Substrate Material ◽  
Atmospheric Plasma

In this work, ZK60 magnesium alloy was employed as a substrate material to produce ceramic coatings, containing Ca and P, by micro-arc oxidation (MAO). Atmospheric plasma spraying (APS) was used to prepare the hydroxyapatite layer (HA) on the MAO coating to obtain a composite coating for better biological activity. The coatings were examined by various means including an X-ray diffractometer, a scanning electron microscope and an energy spectrometer. Meanwhile, an electrochemical examination, immersion test and tensile test were used to evaluate the in vitro performance of the composite coatings. The results showed that the composite coating has a better corrosion resistance. In addition, this work proposed a degradation model of the composite coating in the simulated body fluid immersion test. This model explains the degradation process of the MAO/APS coating in SBF.

Evaluation of the Bioactivity Behavior of a 48 Wt %SiO2 Bioglass through Experiments in Simulated Body Fluid

2012 ◽  
Vol 727-728 ◽  
pp. 1238-1242 ◽  
Author(s):  
Roger Borges ◽  
Antônio Carlos da Silva ◽  
Juliana Marchi
Keyword(s):  
Corrosion Resistance ◽  
Surface Layer ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Glass Network ◽  
In Vitro Experiments ◽  
High Corrosion Resistance ◽  
Before And After ◽  
O 19

Among bioceramics materials, bioglasses which exhibits either a bioactive or resorbable behavior has been studied for many applications, such as bone substitutive and regeneration. When in contact with body fluid, the bioglasses can induce the formation of a hydroxyapatite surface layer. In this paper, we studied the bioactivity of a bioglass containing 48 wt %SiO2, 27 wt% Na2O, 19 wt % CaO and 6 wt %P2O5. After fusion and annealing, the samples were immersed in SBF for different periods, up to 14 days. The samples were characterized through XRD, DRIFT and SEM before and after bioactivity experiments. The overall results suggest the formation of a surface layer of consisting of hydroxyapatite, which was crystallized within seven days after in vitro experiments, leading to a suitable bioactivity. Moreover, the samples showed a glass network with high cohesion due to calcium addition, leading to materials with high corrosion resistance.

scholarly journals Bioactivity Behavior Evaluation of PCL-Chitosan-Nanobaghdadite Coating on AZ91 Magnesium Alloy in Simulated Body Fluid

Coatings ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 231
Author(s):  
Farzad Soleymani ◽  
Rahmatollah Emadi ◽  
Sorour Sadeghzade ◽  
Fariborz Tavangarian
Keyword(s):  
Simulated Body Fluid ◽  
Corrosion Rate ◽  
Composite Coating ◽  
Body Fluid ◽  
Composite Coatings ◽  
Phosphate Buffer Solution ◽  
Az91 Alloy ◽  
Apatite Formation ◽  
Az91 Magnesium Alloy ◽  
Sbf Solution

Polymer–ceramic composite coatings on magnesium-based alloys have attracted lots of attention in recent years, to control the speed of degradability and to enhance bioactivity and biocompatibility. In this study, to decrease the corrosion rate in a simulated body fluid (SBF) solution for long periods, to control degradability, and to enhance bioactivity, polycaprolactone–chitosan composite coatings with different percentages of baghdadite (0 wt.%, 3 wt.%, and 5 wt.%) were applied to an anodized AZ91 alloy. According to the results of the immersion test of the composite coating containing 3 wt.% baghdadite in a phosphate buffer solution (PBS), the corrosion rate decreased from 0.45 (for the AZ91 sample) to 0.11 mg/cm2·h after seven days of immersion. To evaluate the apatite formation capability of specimens, samples were immersed in an SBF solution. The results showed that the samples were bioactive as apatite layers formed on the surface of specimens. The composite coating containing 3 wt.% baghdadite showed the highest apatite-formation capability, with a controlled release of ions, and the lowest corrosion rate in the SBF.

scholarly journals Silane/TiO2 coating to control the corrosion rate of magnesium alloys in simulated body fluid

2016 ◽  
Vol 104 ◽  
pp. 152-161 ◽  
Author(s):  
L.C. Córdoba ◽  
M.F. Montemor ◽  
T. Coradin
Keyword(s):  
Simulated Body Fluid ◽  
Corrosion Rate ◽  
Magnesium Alloys ◽  
Body Fluid ◽  
Tio2 Coating
Sign in / Sign up

Export Citation Format

Share Document