Study of ground plane of dual-band patch antenna on SAR

2007 ◽  
Vol 49 (4) ◽  
pp. 949-953 ◽  
Author(s):  
K. H. Chan ◽  
C. K. Tang ◽  
K. H. Wong ◽  
L. C. Fung ◽  
S. W. Leung
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Dual Band

Dual-band patch antenna with complementary split ring resonators loaded modified ground plane

2013 ◽  
Vol 43 (3) ◽  
pp. 227-235 ◽  
Author(s):  
Falguni Raval ◽  
Y.P. Kosta ◽  
Harshita Joshi
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Ring Resonators ◽  
Dual Band ◽  
Split Ring ◽  
Split Ring Resonators

scholarly journals Beamwidth-Enhanced Low-Profile Dual-Band Circular Polarized Patch Antenna for CNSS Applications

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Hongmei Liu ◽  
Chenhui Xun ◽  
Shaojun Fang ◽  
Zhongbao Wang
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Coupled Line ◽  
Low Profile ◽  
Feed Network ◽  
Single Input ◽  
Half Power

A low-profile dual-band circular polarized (CP) patch antenna with wide half-power beamwidths (HPBWs) is presented for CNSS applications. Simple stacked circular patches are used to achieve dual-band radiation. To enhance the HPBW for the two operation bands, a dual annular parasitic metal strip (D-APMS) combined with reduced ground plane (R-GP) is presented. A single-input feed network based on the coupled line transdirectional (CL-TRD) coupler is also proposed to provide two orthogonal modes at the two frequency bands simultaneously. Experimental results show that the 10 dB impedance bandwidth is 32.7%. The 3 dB axial ratio (AR) bandwidths for the lower and upper bands are 4.1% and 6.5%, respectively. At 1.207 GHz, the antenna has the HPBW of 123° and 103° in the xoz and yoz planes, separately. And the values are 127° and 113° at 1.561 GHz.

Dual-Band Proximity Coupled Feed Microstrip Patch Antenna with ‘T’ Slot on the Radiating Patch and ‘Dumbbell’ Shaped Defected Ground Structure

2016 ◽  
Vol 3 (2) ◽  
pp. 435 ◽  
Author(s):  
Dawit Fitsum ◽  
Dilip Mali ◽  
Mohammed Ismail
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

<p>This paper presents Dual-Band proximity coupled feed rectangular Microstrip patch antenna with slots on the radiating patch and Defected Ground Structure. Initially a simple proximity coupled feed rectangular Microstrip patch antenna resonating at 2.4 GHz is designed. Etching out a ‘Dumbbell’ shaped defect from the ground plane and ‘T’ shaped slot from the radiating patch of the proximity coupled feed rectangular Microstrip patch antenna, results in a Dual-Band operation, i.e., resonating at 2.4 GHz and 4.5 GHz; with 30.3 % and 18.8% reduction in the overall area of the patch and the ground plane of the reference antenna respectively. The proposed antenna resonates in S-band at frequency of 2.4 GHz with bandwidth of 123.6 MHz and C-band at frequency of 4.5 GHz with bandwidth of 200 MHz, and a very good return loss of -22.1818 dB and -19.0839 dB at resonant frequency of 2.4 GHz and 4.5 GHz respectively is obtained. The proposed antenna is useful for different wireless applications in the S-band and C-band.</p>

scholarly journals A Study on Dual-band Microstrip Rectangular Patch Antenna for Wi-Fi

2020 ◽  
Vol 16 ◽  
pp. 01-12
Author(s):  
Rabnawaz Sarmad Uqaili ◽  
Junaid Ahmed Uqaili ◽  
Sidrish Zahra ◽  
Faraz Bashir Soomro ◽  
Ali Akbar
Keyword(s):  
Dielectric Constant ◽  
Patch Antenna ◽  
Patch Size ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
802.11 Wlan

This paper presents the design of a dual-band microstrip patch antenna for Wi-Fi that operates at 2.5 GHz and 5.8 GHz. The antenna contains a rectangular patch with two rectangular slots. The first slot is incorporated in the patch while the second slot is incorporated in the ground plane. The antenna is based on a microstrip fed rectangular patch printed on the FR-4 epoxy substrate with a dielectric constant of 4.4 and a thickness of 1.6 mm with patch size 24 mm × 21 mm. The simulated result shows that the realized antenna successfully works on dual-band and subsequently achieves a bandwidth of 100 MHz and 200 MHz as well as the return loss about -29.9 dB and -15.16 dB for 2.5 GHz and 5.8 GHz respectively. A stable omnidirectional radiation pattern is observed in the operating frequency bands. The antenna meets the required specifications for 802.11 WLAN standards.

scholarly journals Compact Dual-Band Antenna with Paired L-Shape Slots for On- and Off-Body Wireless Communication

Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 7953
Author(s):  
Sarosh Ahmad ◽  
Adnan Ghaffar ◽  
Niamat Hussain ◽  
Nam Kim
Keyword(s):  
Frequency Band ◽  
Patch Antenna ◽  
Specific Absorption Rate ◽  
Ground Plane ◽  
Dual Band ◽  
Physical Layers ◽  
Dual Band Antenna ◽  
Lower Frequency Band ◽  
And Performance ◽  
The Impact

A simple dual-band patch antenna with paired L-shap slots for on- and off-body communications has been presented in this article. The proposed antenna resonates in the industrial, scientific, and medical (ISM) band at two different frequencies, at 2.45 GHz and 5.8 GHz. At the lower frequency band, the antenna’s radiation pattern is broadsided directional, whereas it is omni-directional at the higher frequency band. The efficiency and performance of the proposed antenna under the influence of the physical body are improved, and the specific absorption rate (SAR) value is significantly reduced by creating a full ground plane behind the substrate. The substrate’s material is FR-4, the thickness of which is 1.6 mm and it has a loss tangent of tanδ = 0.02. The overall size of the proposed design is 40 mm × 30 mm × 1.6 mm. Physical phantoms, such as skin, fat and muscle, are used to evaluate the impact of physical layers at 2.45 GHz and 5.8 GHz. The SAR values are assessed and found to be 0.19 W/kg and 1.18 W/kg at 2.45 GHz and 5.8 GHz, respectively, over 1 gram of mass tissue. The acquired results indicate that this antenna can be used for future on- and off-body communications and wireless services.

scholarly journals Dual Band Microstrip Patch Antenna with I & T Shaped Slots on the Ground Plane

2015 ◽  
Vol 121 (8) ◽  
pp. 7-10
Author(s):  
Ajay KumarDwivedi ◽  
Rajeev Paulus ◽  
A.K Jaiswal ◽  
Aditi Agrawal
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Microstrip Patch

scholarly journals Dual Band Slotted Printed Circular Patch Antenna With Superstrate and EBG Structure for 5G Applications

2019 ◽  
Vol 38 (1) ◽  
pp. 227-238 ◽  
Author(s):  
Bismah Hasan ◽  
Kamran Raza
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Antenna Element ◽  
Radiation Characteristics ◽  
Circular Patch ◽  
Feed Line ◽  
Circular Patch Antenna ◽  
Power Radiation

Slotted circular printed layered patch antenna is designed, simulated and fabricated for 5G (Fifth Generation) wireless communication applications. The antenna consists of slots in the main radiating circular patch element for miniaturizing the size of the radiating element and providing dual band radiation characteristics. The feed line is separated on bottom substrate layer with EBG (Electromagnetic Band-Gap) embedded for enhancing the gain characteristics of the antenna. Superstrate layer is also used for improving the gain of the antenna where the distance from the radiating antenna element is optimized for maximizing the impedance bandwidth and radiation characteristics. The feed realization and impedance matching of the radiating slotted circular patch antenna is done by inducing slot at the middle ground plane of the slot embedded circular patch antenna system. The proposed configuration provides power radiation gain values of more than 5 dB for the Ka band of communications, whereas the impedance bandwidth of the antenna is verified for the dual resonances at 27.5 and 28.5 GHz. Dual band radiation characteristics are attained by embedding and optimizing the slot length and width in the circular patch radiator element that is placed on the upper face of the substrate RT Rogers Duroid 5880 layer. The length of the microstrip feed line embedded in the lower layer of the substrate is optimized for providing required bandwidth characteristics for the dual frequency point radiations. The antenna configuration is designed, modeled and simulated in CST (Central Standard Time) Microwave studio. The antenna is fabricated and measured vs simulated frequency response, gain patterns and current density plots are presented for the verification of antenna operation in the desired frequency bands.

scholarly journals Comparison and Performance Evaluation on Microstrip Patch Antenna for WLAN Application

2016 ◽  
Vol 4 (3) ◽  
pp. 80-84
Author(s):  
Meenal Kate ◽  
Anjana Goen
Keyword(s):  
Patch Antenna ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Area Network ◽  
Microstrip Patch ◽  
And Performance

This paper present a comparative study between two works proposed for microstrip patch antenna dual band operations. The comparison is made between a dual-band planar antenna with a compact radiator for 2.4/5.2/5.8-GHz Wireless Local Area Network (WLAN) applications and a printed circular microstrip patch antenna with a four rectangular shape strip and co planar rectangular ground plane antenna. The comparative analysis between these two antennas consist of following parameters such as dimensions, bandwidth, gain, return loss, directivity etc.

scholarly journals Particle Swarm Optimization for Antenna Designs in Engineering Electromagnetics

2008 ◽  
Vol 2008 ◽  
pp. 1-10 ◽  
Author(s):  
Nanbo Jin ◽  
Yahya Rahmat-Samii
Keyword(s):  
Particle Swarm Optimization ◽  
Patch Antenna ◽  
Ground Plane ◽  
Particle Swarm ◽  
Dual Band ◽  
Radiation Characteristics ◽  
Swarm Optimization ◽  
Multiobjective Problems ◽  
Wave Antenna ◽  
Measurement Results

This paper presents recent advances in applying particle swarm optimization (PSO) to antenna designs in engineering electromagnetics. By linking the PSO kernel with external electromagnetic (EM) analyzers, the algorithm has the flexibility to handle both real and binary variables, as well as multiobjective problems with more than one optimization goal. Three examples, including the designs of a dual-band patch antenna, an artificial ground plane of a surface wave antenna, and an aperiodic antenna array, are presented. Both simulation and measurement results are provided to illustrate the effectiveness of applying the swarm intelligence to design antennas with desired frequency response and radiation characteristics for practical EM applications.

Sign in / Sign up

Export Citation Format

Share Document