Flexible and stretchable electrode based on multiwalled carbon nanotube/deproteinized natural rubber composites

2017 ◽  
Vol 57 (12) ◽  
pp. 1356-1366 ◽  
Author(s):  
Paweenuch Tangkitthanachoke ◽  
Karat Petcharoen ◽  
Nophawan Paradee ◽  
Watchara Sangwan ◽  
Anuvat Sirivat
Keyword(s):  
Carbon Nanotube ◽  
Natural Rubber ◽  
Multiwalled Carbon Nanotube ◽  
Rubber Composites ◽  
Multiwalled Carbon ◽  
Natural Rubber Composites ◽  
Stretchable Electrode ◽  
Deproteinized Natural Rubber

scholarly journals Resistance-strain sensitive rubber composites filled by multiwalled carbon nanotubes for structuraldeformation monitoring

2021 ◽  
Vol 11 ◽  
pp. 184798042110113
Author(s):  
Xingyao Liu ◽  
Rongxin Guo ◽  
Zhiwei Lin ◽  
Yang Yang ◽  
Haiting Xia ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Natural Rubber ◽  
Multiwalled Carbon Nanotubes ◽  
Resistance Strain ◽  
Multiwalled Carbon Nanotube ◽  
Strain Response ◽  
Rubber Composites ◽  
Multiwalled Carbon ◽  
Carbon Nanotube Networks

In this article, multiwalled carbon nanotube/natural rubber composites with resistance-strain sensitivity were prepared by solution method, when the electrical percolation threshold of multiwalled carbon nanotube is only ∼3.5 wt%. The mechanical properties and resistance-strain response sensitivity were studied and analyzed systematically. The dispersion of multiwalled carbon nanotubes in the natural rubber matrix was characterized by field-emission scanning electron microscope and X-ray diffractometer. The composite exhibits good deformation sensitivity (gauge factor >27), large strain sensing range (>200%), and high signal stability when multiwalled carbon nanotube content was appropriate. The composite is suited to application in strain monitoring of large deformation structures since the resistance-strain response is more stable when strain exceeds 100%. To understand the mechanism of the resistance-strain response, the ‘shoulder peak’ of resistance-strain curve was researched and explained by the digital image correlation method, and an analytical model was developed when considering the effects of electronic tunneling and hopping in multiwalled carbon nanotube networks. Both experiment and analytical results confirm the break-restructure process of multiwalled carbon nanotube networks under applied strain cause the resistance-strain response. Finally, the practical application of the composite to monitoring strain load of rubber isolation bearing was realized.

Natural rubber/multiwalled carbon nanotube composites developed with a combined self-assembly and latex compounding technique

2012 ◽  
Vol 125 (5) ◽  
pp. 3920-3928 ◽  
Author(s):  
Zheng Peng ◽  
Chunfang Feng ◽  
Yongyue Luo ◽  
Yongzhen Li ◽  
Zhifeng Yi ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Natural Rubber ◽  
Self Assembly ◽  
Multiwalled Carbon Nanotube ◽  
Multiwalled Carbon ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites ◽  
Latex Compounding

Production of a cellular structure in carbon nanotube/natural rubber composites revealed by nanomechanical mapping

Carbon ◽  
2010 ◽  
Vol 48 (13) ◽  
pp. 3708-3714 ◽  
Author(s):  
Dong Wang ◽  
So Fujinami ◽  
Ken Nakajima ◽  
Ken-ichi Niihara ◽  
Shigeki Inukai ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Natural Rubber ◽  
Cellular Structure ◽  
Rubber Composites ◽  
Natural Rubber Composites

Investigation of the Crack Propagation Behavior of the Multiwalled Carbon Nanotube/Graphite/Natural Rubber Hybrid Nanocomposites Using Digital Image Correlation Technique

2019 ◽  
Vol 14 (12) ◽  
pp. 1766-1770
Author(s):  
Hasan Kasim ◽  
Ahmad Naser Aldeen ◽  
Yücel Can ◽  
Murat Yazici
Keyword(s):  
Electrical Conductivity ◽  
Carbon Nanotube ◽  
Digital Image Correlation ◽  
Crack Propagation ◽  
Natural Rubber ◽  
Digital Image ◽  
Multiwalled Carbon Nanotube ◽  
Hybrid Nanocomposites ◽  
Image Correlation ◽  
Multiwalled Carbon

In the presented study, a hybrid Natural Rubber (NR) based semiconductive nanocomposites was examined to obtain better electrical and mechanical properties. The hybrid nanocomposite produced by incorporation of the Multiwalled Carbon Nanotube (MWCNT) and graphite nanoparticles into the NR. The conventional curing additives also included in the compound. A functionalized MWCNT (1, 2 and 3 phr's) with 3 phr graphite quotas were studied to produce the NR nanocomposites. The MWCNT/Graphite and NR mixed homogeneously to advance the interfacial interaction with the matrix. The graphite nano-particulates added to obtain 3D electrical connectivity network in the hybrid nanocomposites by becoming bridging points between multiwalled carbon nanotubes. Nanocomposites were produced as 3 mm sheets in a steel mold by vulcanizing at 165 °C for 10 min under pressure. The single-edge notched tension specimens were subjected to estimate crack propagation and electrical resistance relation. Digital Image Correlation (DIC) technique was used to observe the crack resistivity function. The results evaluated to clarify the relationship between crack length, MWCNT filler ratio, and electrical conductivity properties. MWCNTs are generally preferred as the reinforcements for their very high aspect ratio and excellent specific surface area properties. However, the electrical conductivity of the nanocomposites is owing to the constitution of a continuous conductive 3D network of MWCNT and Graphite in the NR matrix.

Effects of tube diameter and state of dispersion on electrical properties of multi-walled carbon nanotube/natural rubber composites

Carbon ◽  
2012 ◽  
Vol 50 (10) ◽  
pp. 3965
Author(s):  
Tomoyoshi Sugiura ◽  
Toru Noguchi ◽  
Masatsugu Fujishige ◽  
Shigeki Inukai ◽  
Hiroyuki Ueki ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Electrical Properties ◽  
Natural Rubber ◽  
Tube Diameter ◽  
Rubber Composites ◽  
Multi Walled Carbon Nanotube ◽  
Natural Rubber Composites

Mechanical properties, thermal behaviors and oil resistance of epoxidized natural rubber/multiwalled carbon nanotube nanocomposites prepared via in situ epoxidation

2016 ◽  
Vol 49 (2) ◽  
pp. 99-119 ◽  
Author(s):  
Saowaroj Chuayjuljit ◽  
Piyaphorn Mungmeechai ◽  
Anyaporn Boonmahitthisud
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Carbon Nanotube ◽  
Natural Rubber ◽  
Multiwalled Carbon Nanotube ◽  
Epoxidized Natural Rubber ◽  
Multiwalled Carbon ◽  
Oil Resistance ◽  
In Situ Epoxidation

Epoxidized natural rubber (ENR)/multiwalled carbon nanotube (MWCNT) nanocomposites were prepared via in situ epoxidation of natural rubber (NR) using a molar ratio of formic acid/hydrogen peroxide to isoprene unit at 0.75/0.75 with five loadings of MWCNTs, ranging from 0.5–2.5 parts per hundred parts of rubber (phr), at 50°C for 4 h. Based on Fourier transform infrared spectra, the epoxide content of ENR in the nanocomposites was about 32.5–33.2 mole%. Accordingly, the products were referred to ENR30/MWCNT nanocomposites. The curing characteristics, mechanical properties (tensile properties, tear strength, and hardness), glass transition temperature ( Tg), thermal stability, and oil resistance of these in situ ENR30/MWCNT nanocomposites were investigated and compared with NR and neat ENR30. The results showed that the scorch and cure times of ENR30/MWCNT nanocomposites were the longest followed by NR and ENR30. The incorporation of an appropriate amount of MWCNTs into the in situ epoxidation apparently improved the properties of NR. Among them, the nanocomposites filled with 2 phr MWCNTs exhibited the highest mechanical properties, Tg, thermal stability, and oil resistance. The mechanical properties of the in situ nanocomposites were also compared with those of the control nanocomposites prepared by adding MWCNTs directly in the prepared ENR30 latex. It was found that at similar MWCNT loadings, the in situ nanocomposites exhibited higher mechanical properties than the control nanocomposites.

scholarly journals Effect of the Processing on the Resistance–Strain Response of Multiwalled Carbon Nanotube/Natural Rubber Composites for Use in Large Deformation Sensors

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1845
Author(s):  
Xingyao Liu ◽  
Rongxin Guo ◽  
Rui Li ◽  
Hui Liu ◽  
Zhengming Fan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotube ◽  
Natural Rubber ◽  
Large Deformation ◽  
Large Strain ◽  
Deformation Monitoring ◽  
Resistance Strain ◽  
Multiwalled Carbon Nanotube ◽  
Strain Response ◽  
Multiwalled Carbon

The dispersion, electrical conductivities, mechanical properties and resistance–strain response behaviors of multiwalled carbon nanotube (MWCNT)/natural rubber (NR) composites synthesized by the different processing conditions are systematically investigated at both macro- and micro-perspectives. Compared with the solution and flocculation methods, the two roll method produced the best MWCNTs distribution since the materials are mixed by strong shear stress between the two rolls. An excellent segregated conductive network is formed and that a low percolation threshold is obtained (~1 wt.%) by the two roll method. Different from the higher increases in conductivity for the composites obtained by the solution and flocculation methods when the MWCNT content is higher than 3 wt.%, the composite prepared by the two roll method displays obvious improvements in its mechanical properties. In addition, the two roll method promotes good stability, repeatability, and durability along with an ultrahigh sensitivity (GFmax = 974.2) and a large strain range (ε = 109%). The ‘shoulder peak’ phenomenon has not been observed in the composite prepared by the two roll method, confirming its potential for application as a large deformation monitoring sensor. Moreover, a mathematical model is proposed to explain the resistance–strain sensing mechanism.

Sign in / Sign up

Export Citation Format

Share Document