Thermal and Mechanical Properties of α-MoSi2as a High-Temperature Material

2017 ◽  
Vol 255 (4) ◽  
pp. 1700448 ◽  
Author(s):  
Afiqa Mohamad ◽  
Yuji Ohishi ◽  
Hiroaki Muta ◽  
Ken Kurosaki ◽  
Shinsuke Yamanaka
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Thermal And Mechanical Properties ◽  
High Temperature Material

Polyimide Copolymers Containing Various Levels Of The 6F Moiety For High Temperature And Microelectronic Applications

1991 ◽  
Vol 227 ◽  
Author(s):  
M. Haider ◽  
E. Chenevey ◽  
R. H. Vora ◽  
W. Cooper ◽  
M. Glick ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Electrical Properties ◽  
Oxidative Stability ◽  
Trifluoromethyl Group ◽  
Thermal And Mechanical Properties

ABSTRACTTrifluoromethyl group-containing polyimides not only show extraordinary electrical properties, but they also exhibit excellent long-term thermo-oxidative stability. Among the most thermomechanically stable structural polyimides are those from 6F dianhydride (6FDA) and 6F diamines. The effects of substituting non-fluorine containing monomers such as BTDA, mPDA and 4,4′-DADPS for the hexafluoroisopropylidene monomers on the dielectric, thermo-oxidative, thermal and mechanical properties of the copolymers were studied.

Solid State Bonding of CuCrZr to Duplex Stainless Steel

2013 ◽  
Vol 302 ◽  
pp. 136-139 ◽  
Author(s):  
Ho Sung Lee ◽  
Jong Hoon Yoon ◽  
Joon Tae Yoo ◽  
Ji Ung Choi
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
High Temperature ◽  
Solid State ◽  
Duplex Stainless Steel ◽  
High Strength ◽  
Atomic Diffusion ◽  
Thermal And Mechanical Properties ◽  
Solid State Bonding ◽  
Duplex Steel

In the solid state bonding, joint are made by pressing surfaces together at high temperature so that a bond grows across the interface by atomic diffusion. In order to satisfy both requirements of thermal and mechanical properties of aerospace vehicle, conductive CuCrZr alloy was bonded to duplex steel with high strength. Solid state bonding was performed at 3 different pressure conditions and at temperatures of 850°C and 950°C. Microstructural and mechanical evaluation was performed to obtain the optimum joining condition.

High-performance PEN/GF crosslinkable thermoplastic composites: preparation, properties, and crosslinking reaction

2011 ◽  
Vol 45 (24) ◽  
pp. 2587-2592 ◽  
Author(s):  
Jian Yang ◽  
Jiachun Zhong ◽  
Rui Zhao ◽  
Xiaobo Liu
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
High Temperature ◽  
High Performance ◽  
Thermoplastic Composites ◽  
Crosslinking Reaction ◽  
Thermal And Mechanical Properties ◽  
Continuous Glass Fiber ◽  
Glass Fiber Reinforced ◽  
Properties Of Composites

The continuous glass fiber-reinforced polyarylene ether nitriles (PEN) composites were successfully fabricated from PEN pre-impregnated glass fabric mates and PEN films using a film-stacking method. The work involved heat treatment for crosslinking reaction of PEN, and so it provided an interesting comparison of how heat treatment can influence the properties of composites. Detailed study on heat treatments for crosslinking reaction of PEN in the catalysis of the ZnCl2 at high temperature promoting the thermal and mechanical properties of composites were also investigated. The results showed that the thermal and mechanical properties of composites were enhanced by heat treatment, which is due to the fact that PEN resins could be crosslinked by the catalytic action of ZnCl2 at high temperature and formed triazine rings with a more thermally stable structure.

Nafion – Azole Composite Membranes for High Temperature PEMFC

2014 ◽  
Vol 783-786 ◽  
pp. 1692-1697
Author(s):  
Je Deok Kim ◽  
Mun Suk Jun
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
High Temperature ◽  
Proton Conductivity ◽  
Composite Membrane ◽  
Room Temperature ◽  
Composite Membranes ◽  
Thermal And Mechanical Properties ◽  
High Proton Conductivity ◽  
High Proton

Nafion-azole (benzimidazole, 1,2,4-triazole, 1,2,3-triazole) composite membranes were prepared by room temperature and autoclave solution processing for high temperature (above 100 °C) PEMFC. Among the various Nafion – azole composite membranes, Nafion – 1,2,3-triazole membrane showed excellent flexibility, thermal stability, and homogeneous structure. Nafion – 1,2,4-triazole composite membrane had high thermal and mechanical properties, and also showed high proton conductivity of 0.02 S/cm at the temperature of 160 °C under dry (N2) condition.

scholarly journals A Granite Bed Storage for a Small Solar Dryer

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1969 ◽  
Author(s):  
Magdalena Nemś ◽  
Artur Nemś ◽  
Paweł Pacyga
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Experimental Tests ◽  
Thermal And Mechanical Properties ◽  
Solar Dryer ◽  
Different Diameters

The article presents the concept of a high-temperature solar dryer with an internal bed storage. Granite was selected as the material for filling the bed storage, and an emphasis was put on its versatile use and favourable thermal and mechanical properties. Experimental tests were carried out for the charging process of the bed storage, which was filled with granite spheres with three different diameters. The influence of the sphere’s diameter on the charging and discharging process of the bed storage was analysed. The results of the experiment allowed a conclusion to be drawn that the use of a granite storage bed could prolong the operation of the considered dryer by two hours.

Thermal and mechanical properties of light-weight concrete exposed to high temperature

2012 ◽  
Vol 37 (3) ◽  
pp. 200-216 ◽  
Author(s):  
Roberto Felicetti ◽  
Pietro G. Gambarova ◽  
Patrick Bamonte
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Light Weight ◽  
Thermal And Mechanical Properties ◽  
Light Weight Concrete
Sign in / Sign up

Export Citation Format

Share Document