scholarly journals The meander‐type fish pass: An alternative to the conventional vertical slot pass

Author(s):  
Ulf Helbig ◽  
Matthias Mende ◽  
Werner Dönni ◽  
Klaas Rathke
Keyword(s):  
2016 ◽  
Vol 33 (1) ◽  
pp. 16-26 ◽  
Author(s):  
E. Pereira ◽  
B. R. Quintella ◽  
C. S. Mateus ◽  
C. M. Alexandre ◽  
A. F. Belo ◽  
...  
Keyword(s):  

Water ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 551 ◽  
Author(s):  
Helmut Mader ◽  
Andreas Brandl ◽  
Sabine Käfer

To establish good ecological status in European rivers, firstly there is the question of how to re-establish unhindered migration for fish at barriers. This article documents a project to re-establish longitudinal connectivity at a large epipotamal river at the Schwabeck Hydro Power Plant, Carinthia/Austria, from the selection of an appropriate fish pass system to the final function control. Instead of a standard vertical slot, the innovative enature® fish pass shape with a significant reduction of flow, velocities, energy dissipation rate, and turbulences, but with a clear enhancement of fish passage capability, was chosen. Using 2D hydraulic modelling and a statistical evaluation of fish passage, physical and ecological effects were reviewed, with the clear result that there is no identifiable, positive ecological effect on the number of fish migrating with an increase of concurrent flow in the fish pass. Passability and findability were monitored with the new FishCam, an automatic, precise, and constant (24/7 24 h a day, seven days a week) collection and pre-evaluation field data survey method which does not involve trapping of, contact with, or stress for fish. It was shown that the enature® fish pass enables an unhindered migration for all available fish species. As >99% of fish migrate from April to November, there is no ecological need to operate a fully functional fish pass year-round. Combining all the individual factors together, the fish pass at the Schwabeck Hydro Power Plant is an almost exemplary solution for a fully functioning restauration of the continuum with a minimized loss of generation of electricity.


2018 ◽  
Vol 40 ◽  
pp. 03010
Author(s):  
Didier Bousmar ◽  
Estelle Courtois ◽  
Loïc Van Audenhaege ◽  
Xavier Rollin

Artificial fish passes are often the most effective solution to restore the ecological continuity of a dammed river. Such a pass can be built for specifically targeted fish species, based on the existing knowledge on its swimming capacity and behaviour. Usually, a wider range of possible species are present in the river and may use the fish pass. In the present study, a vertical slot fish pass has been designed for salmonid fish (namely Atlantic salmon Salmo Salar). This fish pass layout was initially tested using a scale model where juvenile fish were introduced. The study has now been extended to other species, some of them having weaker swimming capacity: bleak (Alburnus alburnus); chub (Squalius cephalus); and bullhead (Cottus gobio). Fish behaviour in the pass was observed using PIT-tag and video. PIT-tag tracking enabled to characterise the capability of the fish to cross the whole fish pass. Video recording was used to analyse in more details the behaviour of the fish in a specific pool.


Water ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1079
Author(s):  
Lena Mahl ◽  
Patrick Heneka ◽  
Martin Henning ◽  
Roman B. Weichert

The efficiency of a fishway is determined by the ability of immigrating fish to follow its attraction flow (i.e., its jet) to locate and enter the fishway entrance. The hydraulic characteristics of fishway entrance jets can be simplified using findings from widely investigated surface jets produced by shaped nozzles. However, the effect of the different boundary conditions of fishway entrance jets (characterized by vertical entrance slots) compared to nozzle jets must be considered. We investigate the downstream propagation of attraction jets from the vertical slot of a fishway entrance into a quiescent tailrace, considering the following boundary conditions not considered for nozzle jets: (1) slot geometry, (2) turbulence characteristics of the approach flow to the slot, and (3) presence of a lateral wall downstream of the slot. We quantify the effect of these boundary conditions using three-dimensional hydrodynamic-numeric flow simulations with DES and RANS turbulence models and a volume-of-fluid method (VoF) to simulate the free water surface. In addition, we compare jet propagation with existing analytical methods for describing jet propagations from nozzles. We show that a turbulent and inhomogeneous approach flow towards a vertical slot reduces the propagation length of the slot jet in the tailrace due to increased lateral spreading compared to that of a jet produced by a shaped nozzle. An additional lateral wall in the tailrace reduces lateral spreading and significantly increases the propagation length. For highly turbulent flows at fishway entrances, the RANS model tends to overestimate the jet propagation compared to the transient DES model.


Water ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1186
Author(s):  
Francisco Javier Bravo-Córdoba ◽  
Juan Francisco Fuentes-Pérez ◽  
Jorge Valbuena-Castro ◽  
Andrés Martínez de Azagra-Paredes ◽  
Francisco Javier Sanz-Ronda

With the aim of building more compact fishways and adapting them to field conditions to improve their location by fish, it is common to use turning pools, reducing the longitudinal development of the construction. However, depending on their design, turning pools may affect the hydraulic performance of the fishway and consequently the fish passage. To study these phenomena, turning pools in a vertical slot and in different configurations of submerged notches with bottom orifice fishway types were assessed. Both types of fishways were studied using numerical 3D models via OpenFOAM, a computational fluid dynamics software, in combination with fish responses, assessed with PIT (Passive Integrated Transponder) tag telemetry for three different species of potamodromous cyprinids in several fishways. Results show differences between the hydrodynamics of straight and turning pools, with lower values in the hydrodynamic variables in turning pools. Regarding fish behavior, the ascent was slower in turning pools but with no effect on passage success and without being a problem for fish migration. This information validates the use of turning pools as a key design component for fishways for studied species.


2021 ◽  
Author(s):  
Siqi Tong ◽  
Silke Wieprecht ◽  
Martin Schletterer

<p>This study was carried out in the middle and lower reaches of the Jinsha River in southwest China, which represents the upper Yangtze River. Hydraulic structures (14 cascade hydropower stations) are planned and/or constructed in this system, which is considered as largest hydropower base. We aim to summarize appropriate measures to restore the riverine continuum in the middle and lower reaches of the Jinsha River, where high-head cascade hydropower dams are located or planned.</p><p>We distributed a questionnaire to Chinese researchers in the related fields (scientists, hydropower operators and NGOs in China, n = 60). According to the responses, fishways, fish lift, fish lock, trap-and-truck system as well as fish hatcheries (artificial breeding) are recognized to ensure passing respectively preserving fish in the Jinsha River basin.</p><p>A longitudinal connectivity assessment of the study area revealed a severely disturbed continuity status. Based on the biological analyses of the demands of the target fish species and review of fish pass technologies, a vertical-slot fishway is proposed.</p><p>Considering the dam heights and the geographical conditions, it is recommended to combine the vertical-slot fishway with these alternatives to achieve a higher efficiency in passing fish as well as to recover the river continuity towards regional sustainable development.</p>


Sign in / Sign up

Export Citation Format

Share Document