Surfactant Sodium Dodecyl Benzene Sulfonate Improves the Efficiency and Stability of Air‐Processed Perovskite Solar Cells with Negligible Hysteresis

Solar RRL ◽  
2020 ◽  
Vol 4 (11) ◽  
pp. 2000376
Author(s):  
Wenyuan Zhang ◽  
Lang He ◽  
Dongyan Tang ◽  
Xin Li
Keyword(s):  
Solar Cells ◽  
Sodium Dodecyl ◽  
Perovskite Solar Cells ◽  
Sodium Dodecyl Benzene Sulfonate ◽  
Benzene Sulfonate ◽  
Dodecyl Benzene Sulfonate

scholarly journals Controlling of two destructive zooplanktonic predators in Chlorella mass culture with surfactants

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Xiaobin Wen ◽  
Aoqi Zhang ◽  
Xiaoyan Zhu ◽  
Lin Liang ◽  
Yan Huo ◽  
...  
Keyword(s):  
Mass Culture ◽  
Chemical Method ◽  
Sodium Dodecyl ◽  
Sodium Dodecyl Benzene Sulfonate ◽  
Biofuel Production ◽  
Benzene Sulfonate ◽  
Microalgae Biomass ◽  
Mass Cultures ◽  
Dodecyl Benzene Sulfonate ◽  
Raceway Ponds

Abstract Background Predatory flagellates and ciliates are two common bio-contaminants which frequently cause biomass losses in Chlorella mass culture. Efficient and targeted ways are required to control these contaminations in Chlorella mass cultivation aiming for biofuel production especially. Results Five surfactants were tested for its ability to control bio-contaminations in Chlorella culture. All five surfactants were able to eliminate the contaminants at a proper concentration. Particularly the minimal effective concentrations of sodium dodecyl benzene sulfonate (SDBS) to completely eliminate Poterioochromonas sp. and Hemiurosomoida sp. were 8 and 10 mg L−1, respectively, yet the photosynthesis and viability of Chlorella was not significantly affected. These results were further validated in Chlorella mass cultures in 5, 20, and 200 m2 raceway ponds. Conclusions A chemical method using 10 mg L−1 SDBS as pesticide to control predatory flagellate or ciliate contamination in Chlorella mass culture was proposed. The method helps for a sustained microalgae biomass production and utilization, especially for biofuel production.

Spontaneous Formation of DTAB/SDBS Vesicles

2013 ◽  
Vol 734-737 ◽  
pp. 2505-2508
Author(s):  
Lin Lin Cui ◽  
Hua Nan Guan
Keyword(s):  
Sodium Dodecyl ◽  
Sodium Dodecyl Benzene Sulfonate ◽  
Ammonium Bromide ◽  
Benzene Sulfonate ◽  
Complex Formulation ◽  
Structure And Morphology ◽  
Spontaneous Formation ◽  
Dodecyl Benzene Sulfonate ◽  
Dodecyl Trimethyl Ammonium Bromide ◽  
The Stability

Dodecyl trimethyl ammonium bromide/sodium dodecyl benzene sulfonate (DTAB/SDBS) complex formulation of scale effect on the spontaneous formation of vesicles and the influence of different factors on the stability of vesicles were discussed, structure and morphology of vesicles were observed.

scholarly journals Remediation of Cr(VI)/Cd(ІІ)-Contaminated Groundwater with Simulated Permeable Reaction Barriers Filled with Composite of Sodium Dodecyl Benzene Sulfonate-Modified Maifanite and Anhydride-Modified Fe@SiO2@Polyethyleneimine: Environmental Factors and Effectiveness

2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Jingqing Gao ◽  
Yalin Zhai ◽  
Zhenzhen Huang ◽  
Peng Ren ◽  
Jianlei Gao ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Composite Material ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Sodium Dodecyl ◽  
Sodium Dodecyl Benzene Sulfonate ◽  
Contaminated Groundwater ◽  
Column Experiments ◽  
Benzene Sulfonate ◽  
Dodecyl Benzene Sulfonate

A composite material of sodium dodecyl benzene sulfonate- (SDBS-) modified maifanite and anhydride-modified Fe@SiO2@PEI (PEI) was used as an adsorbent for the removal of hexavalent chromium (Cr(VI)) and bivalent cadmium (Cd(II)) from groundwater by using column experiments and simulated PRB test. In this study, the optimum proportion of SDBS-modified maifanite and anhydride-modified Fe@SiO2@PEI was 5 : 1. In the column experiments, it was found that the penetration time increased with the increase of the initial concentrations (30, 60, and 90 mg/L) and the decrease of the flow rates (5.45, 10.9, and 16.35 mL/min) at an influent pH of 6.5 ± 0.3 . It was also obtained that the removal rates of Cr(VI) and Cd(ІІ) reached 99.93% and 99.79% at an initial Cr(VI) and Cd(ІІ) concentration of 30 mg/L with the flow rate of 10.9 mL/min, respectively, at 6 h. Furthermore, excellent removal effectiveness of Cr(VI) and Cd(ІІ) (85.94% and 83.45%, respectively) was still achieved in simulated PRB test at a flow rate of 5.45 mL/min with the heavy metal solution concentration of 5.0 ± 0.5  mg/L (Cr(VI) and Cd(II) concentration were, respectively, 5.0 ± 0 . 5 mg/L); and the adsorbent had not completely failed by the end of the trial. Yoon-Nelson model was successfully applied to predict the breakthrough curves for the assessment of composite material heavy metal removal performance and was in good agreement with the experimental data of the heavy metal removal efficiency. The strong removal ability of the adsorbent could be attributed to the fact that maifanite with a large diameter can provide support and increase the permeability coefficient and porosity and that zero-valent iron (ZVI) can convert Cr(VI) to Cr(III) and improve the adsorption capacity of maifanite. The obtained results suggested that the novel PRB fillers have great significance for preventing and controlling Cr(VI)/Cd(ІІ)-contaminated groundwater.

Sign in / Sign up

Export Citation Format

Share Document