Age of Ancient Monuments by Means of Building Stone Provenance: a Case Study of the Tullianum, Rome, Italy

2001 ◽  
Vol 28 (4) ◽  
pp. 387-393 ◽  
Author(s):  
Daniel B. Karner ◽  
Leonardo Lombardi ◽  
Fabrizio Marra ◽  
Patrizia Fortini ◽  
Paul R. Renne
2014 ◽  
Vol 185 (1) ◽  
pp. 13-31 ◽  
Author(s):  
Claudine Malfilatre ◽  
Erwan Hallot ◽  
Philippe Boulvais ◽  
Marc Poujol ◽  
Annick Chauvin ◽  
...  

Abstract Two examples of granitic stones from Brittany (western France) commercialized under the names of “gris-bleu de Louvigné” and “bleu de Lanhélin” were characterized in order to explore how the provenance of a building stone can be traced back with a maximum of confidence. For this purpose, petrographical, geochemical and magnetic characteristics, representing more than 70 quantitative and qualitative variables, were compiled for a total of 32 samples. We have defined two reference populations for these building stones and have extracted their discriminative characteristics. We have then compared four randomly selected samples and two foreign commercial counterparts of these stones to the reference populations. Discriminative variables differ from one case of comparison to the other, which indicates that a combination of various tools and variables will be generally required to unequivocally fingerprint the origin of a given granitic stone. Where several quarries are mining a single geological unit within a composite intrusion, the provenance of a granitic rock can be defined at the scale of the intrusion. In addition, stones coming from two different intrusions from the same batholith can be distinguished. We conclude that the provenance of any granitic building stone is identifiable, especially if the intrinsic variability of a population of samples representative of that stone has been previously circumscribed. This study underlines that the compilation of databases for building stone identity cards is an essential first step toward the creation of official labels guaranteeing stone provenances.


1988 ◽  
Vol 20 (3) ◽  
pp. 291-294 ◽  
Author(s):  
M. R. D. Seaward
Keyword(s):  

2011 ◽  
Vol 20 (1-3) ◽  
pp. 55-65
Author(s):  
Nikolaos L. Ninis ◽  
Stavros K. Kourkoulis

AbstractIt was pointed out in Part I of this short two-paper series, that the mechanical incompatibility between the authentic building stone of ancient monuments and the stones used as substitute ones during restoration projects, may be the reason of violation of basic restoration principles concerning the protection of the ancient material. In this context certain geometrical configurations of the boundaries of the specimens are examined in this Part II as a possible means of modifying the mechanical behaviour of the substitute stones, in order to make them as compatible as possible with the authentic material. Modifications of both the contact surfaces (in order to change the friction conditions) of the specimens as well as of the free ones (in order to quantify the influence of transforming the smooth cylindrical surface to a fluted one) are examined experimentally. This approach is based on existing observations and numerical studies indicating that the behaviour of a stone specimen in the post-peak region is affected by the geometrical configuration of its boundaries. Taking advantage of the experimental results an alternative compatibility criterion is introduced for situations where the “required” quality of the building stone is its ability to withstand deformation without failing structurally, a characteristic pertinent to statically indeterminate structures, whose design is based on deformation control. This criterion combines both peak stress and maximum failure strain providing a better insight into the problem of mechanical incompatibility of natural building stones.


2021 ◽  
pp. 1-44
Author(s):  
Ketty Iannantuono

Abstract In recent years, images of rage against monuments have filled the media. Unmistakably expressing a high degree of tension in societies, these forms of hostility against heritage have been diversely interpreted, prompting passionate expressions of support as well as fierce criticism. Contesting public memorials, however, is not a new form of socio-political dissent. During Late Antiquity, for example, a new sensibility towards ancient monuments emerged in the vast territories that were once part of the Roman Empire. In this article, the late-antique fate of the so-called ‘temple of Hadrian’ at Ephesus is analysed as a case-study. The aim is to gain a better understanding of the approaches adopted to accommodate traditional monumental landscapes in the changed late-antique socio-political context. This analysis offers a new perspective on ancient and contemporary phenomena of contestations of monuments.


2019 ◽  
Vol 289 ◽  
pp. 10007
Author(s):  
Elisabeth Marie-Victoire ◽  
Myriam Bouichou

Corrosion in reinforced concrete is generally attributed to either carbonation or chloride presence in the vicinity of the bars. But in the field of cultural heritage, especially for the most ancient monuments, it is not rare to encounter both carbonated and chloride polluted concrete, inducing heavy corrosion, as was the case in the Villa E-1027 in Roquebrune-Cap-Martin, on the French Mediterranean seashore. The villa was designed by Eileen Gray and Jean Badovici between 1926 and 1929. Due to aggressive environmental conditions and a period of dereliction, the concrete of the villa was quite heavily decayed and a deep restoration was led between 2000 and 2006. But after a little more than 10 years, and despite active maintenance, the villa is again facing corrosion induced decay. Prior to the definition of a new restoration protocol, to better evaluate the corrosion activity, in 2017 a permanent monitoring of moisture and temperature both in the air and in the concrete was installed. In the meantime, a series of instant electrochemical measurements was performed from 2017 to 2018. A first analysis of the results of the monitoring and the non-destructive tests clearly evidences that probably due to the conjunction of the carbonation of the concrete and external active chloride pollution, corrosion can happen at quite low moisture content.


2011 ◽  
Vol 90 (2-3) ◽  
pp. 239-258 ◽  
Author(s):  
M. Dusar ◽  
R. Dreesen ◽  
L. Indeherberge ◽  
E. Defour ◽  
R. Meuris

AbstractThe origin of a peculiar type of silicified limestone with nodular flints used in parish churches at Sluizen and Vreren, south of Tongeren (province of Limburg, Belgium), has now been elucidated by the discovery of the same rock type in its natural setting, namely the silicified top of the Cretaceous which underlies Clay-with-flints (‘flint eluvium’) and Oligocene sands in a disused quarry at Elst, municipality of Riemst (Limburg, Belgium). Co-operation between professional geologists and amateur palaeontologists has allowed to characterise this rock type, here referred to as ‘Elst tauw’, both petrographically and palaeontologically. The rich echinoid fauna has also been assessed, on the basis of a comparison with assemblages from the Clay-with-flints at Halembaye (Haccourt/Lixhe, province of Liège, Belgium) and at Zichen-Eben Emael in the Hesbaye region. P.J. Felder's ecozones, based on bioclast assemblages, substantiated by analyses of petrographical biofacies features of the original calcarenite, has allowed lithostratigraphic correlation of the ‘Elst tauw’ with the ‘Roosburg block’, which is a variety of ‘Maastricht stone’. Both methods indicate that the ‘Elst tauw’ developed in beds that can be assigned to the condensed Valkenburg-Schiepersberg interval of the lower Maastricht Formation. Petrographical analysis has shown the ‘Elst tauw’ to be quite distinctive; in addition, its natural occurrence at the Elst quarry matches the building stone records in rock type. The latter stem from the same small area, situated southwest of Maastricht. The major steps in its diagenetic history could be reconstructed, starting with pervasive pyritisation of the calcareous allochems, followed by silicification of the grains and pore spaces (different silica cements that became partially recrystallised), completed by oxidation of pyrite with transformation into limonite and, finally, dissolution of the non-pyritised or partially pyritised skeletal allochems creating a mouldic porosity. Silicification probably was achieved prior to the Oligocene. This particular mode of formation has generated a discussion on the proper use of the vernacular term ‘tauw’, a term used in a different sense by the industry, stratigraphers and students of building stones.


2017 ◽  
Vol 76 (4) ◽  
pp. 464-482 ◽  
Author(s):  
Elaine A. Sullivan ◽  
Lisa M. Snyder

Archaeologists, historians, and art historians are increasingly turning to three-dimensional computer modeling to create dynamic visualizations of ancient monuments and urban spaces, but the resulting 3-D content is not always accepted as scholarship and integrated into discipline-specific dialogue. In Digital Karnak: An Experiment in Publication and Peer Review of Interactive, Three-Dimensional Content, Elaine A. Sullivan and Lisa M. Snyder propose a reconceptualization of computer modeling as a new means and form of knowledge production, offer a framework for peer review and publication of 3-D content, and describe an experiment to develop an innovative publication with an interactive computer model at its core. The Digital Karnak model, a geotemporal model of an ancient Egyptian temple, is their case study, a 3-D publication package of which they posted for peer review. This article describes the model's creation, the software interface used for the publication prototype (VSim), and the ways in which this project addresses the challenges of publishing 3-D scholarly content.


2018 ◽  
Vol 7 (2) ◽  
pp. 784 ◽  
Author(s):  
Srisailam Sreedhar ◽  
Venkatesh Srinivasan

Lightning is one of the inevitable disastrous natural phenomena which present serious threat to tall structures including ancient monuments and electrical systems. Though researchers have carried out a wide gamut of research studies to analyze the extent of damage due to direct lightning strikes on important buildings and structures, the focus of this research is on understanding the effects of lightning on tall structures of historical importance and landmark monuments of significance. In this context, different types of Lightning Protection Systems (LPS) are being used to protect tall structures from lightning flashes. However, several complexities related to the appropriate choice of LPS continue to confront researchers since characteristics of lightning such as stroke current, striking distance, return stroke modelling, geometry of the structure etc. pose considerable challenges. This research study presents a detailed chronological overview of lightning strikes on ancient structures, cause and effects, review on LPS strategies along with its impacts on tall structures, historical monuments and landmarks. In addition, a detailed analysis based on a specific case study of a typical historical monument is carried out to ascertain the critical significance of the stipulated zone of protection essential for historical monuments and various risks involved during implementation.


2016 ◽  
Vol 209 ◽  
pp. 56-69 ◽  
Author(s):  
Sohail Mustafa ◽  
Muhammad Arshad Khan ◽  
Muhammad Rustam Khan ◽  
Luís M.O. Sousa ◽  
Fahad Hameed ◽  
...  
Keyword(s):  

2017 ◽  
Vol 221 ◽  
pp. 29-40 ◽  
Author(s):  
Luís Sousa ◽  
Jessica Barabasch ◽  
Karl-Jochen Stein ◽  
Siegfried Siegesmund

Sign in / Sign up

Export Citation Format

Share Document