Atlas of 3D Seismic Attributes

2005 ◽  
pp. 23-46 ◽  
Author(s):  
Trygve Randen ◽  
Lars Sønneland
Keyword(s):  
Seismic Attributes ◽  
3D Seismic

scholarly journals Geomorphological Geometries and High-Resolution Seismic Sequence Stratigraphy of Malay Basin’s Fluvial Succession

2021 ◽  
Vol 11 (11) ◽  
pp. 5156
Author(s):  
Abd Al-Salam Al-Masgari ◽  
Mohamed Elsaadany ◽  
Numair A. Siddiqui ◽  
Abdul Halim Abdul Latiff ◽  
Azli Abu Bakar ◽  
...  
Keyword(s):  
High Resolution ◽  
Sequence Stratigraphy ◽  
Three Dimensional ◽  
Seismic Attributes ◽  
Seismic Facies ◽  
Seismic Sequence ◽  
3D Seismic ◽  
Seismic Sequences ◽  
Seismic Sequence Stratigraphy ◽  
Point Bars

This study identified the Pleistocene depositional succession of the group (A) (marine, estuarine, and fluvial depositional systems) of the Melor and Inas fields in the central Malay Basin from the seafloor to approximately −507 ms (522 m). During the last few years, hydrocarbon exploration in Malay Basin has moved to focus on stratigraphic traps, specifically those that existed with channel sands. These traps motivate carrying out this research to image and locate these kinds of traps. It can be difficult to determine if closely spaced-out channels and channel belts exist within several seismic sequences in map-view with proper seismic sequence geomorphic elements and stratigraphic surfaces seismic cross lines, or probably reinforce the auto-cyclic aggregational stacking of the avulsing rivers precisely. This analysis overcomes this challenge by combining well-log with three-dimensional (3D) seismic data to resolve the deposition stratigraphic discontinuities’ considerable resolution. Three-dimensional (3D) seismic volume and high-resolution two-dimensional (2D) seismic sections with several wells were utilized. A high-resolution seismic sequence stratigraphy framework of three main seismic sequences (3rd order), four Parasequences sets (4th order), and seven Parasequences (5th order) have been established. The time slice images at consecutive two-way times display single meandering channels ranging in width from 170 to 900 m. Moreover, other geomorphological elements have been perfectly imaged, elements such as interfluves, incised valleys, chute cutoff, point bars, and extinction surfaces, providing proof of rapid growth and transformation of deposits. The high-resolution 2D sections with Cosine of Phase seismic attributes have facilitated identifying the reflection terminations against the stratigraphic amplitude. Several continuous and discontinuous channels, fluvial point bars, and marine sediments through the sequence stratigraphic framework have been addressed. The whole series reveals that almost all fluvial systems lay in the valleys at each depositional sequence’s bottom bars. The degradational stacking patterns are characterized by the fluvial channels with no evidence of fluvial aggradation. Moreover, the aggradation stage is restricted to marine sedimentation incursions. The 3D description of these deposits permits distinguishing seismic facies of the abandoned mud channel and the sand point bar deposits. The continuous meandering channel, which is filled by muddy deposits, may function as horizontal muddy barriers or baffles that might isolate the reservoir body into separate storage containers. The 3rd, 4th, and 5th orders of the seismic sequences were established for the studied succession. The essential geomorphological elements have been imaged utilizing several seismic attributes.

Unsupervised machine learning using 3D seismic data applied to reservoir evaluation and rock type identification

2021 ◽  
pp. 1-69
Author(s):  
Marwa Hussein ◽  
Robert R. Stewart ◽  
Deborah Sacrey ◽  
Jonny Wu ◽  
Rajas Athale
Keyword(s):  
Machine Learning ◽  
Seismic Data ◽  
Rock Type ◽  
Seismic Attributes ◽  
Reservoir Quality ◽  
3D Seismic ◽  
Reservoir Properties ◽  
Unsupervised Machine Learning ◽  
Amplitude Data ◽  
3D Seismic Data

Net reservoir discrimination and rock type identification play vital roles in determining reservoir quality, distribution, and identification of stratigraphic baffles for optimizing drilling plans and economic petroleum recovery. Although it is challenging to discriminate small changes in reservoir properties or identify thin stratigraphic barriers below seismic resolution from conventional seismic amplitude data, we have found that seismic attributes aid in defining the reservoir architecture, properties, and stratigraphic baffles. However, analyzing numerous individual attributes is a time-consuming process and may have limitations for revealing small petrophysical changes within a reservoir. Using the Maui 3D seismic data acquired in offshore Taranaki Basin, New Zealand, we generate typical instantaneous and spectral decomposition seismic attributes that are sensitive to lithologic variations and changes in reservoir properties. Using the most common petrophysical and rock typing classification methods, the rock quality and heterogeneity of the C1 Sand reservoir are studied for four wells located within the 3D seismic volume. We find that integrating the geologic content of a combination of eight spectral instantaneous attribute volumes using an unsupervised machine-learning algorithm (self-organizing maps [SOMs]) results in a classification volume that can highlight reservoir distribution and identify stratigraphic baffles by correlating the SOM clusters with discrete net reservoir and flow-unit logs. We find that SOM classification of natural clusters of multiattribute samples in the attribute space is sensitive to subtle changes within the reservoir’s petrophysical properties. We find that SOM clusters appear to be more sensitive to porosity variations compared with lithologic changes within the reservoir. Thus, this method helps us to understand reservoir quality and heterogeneity in addition to illuminating thin reservoirs and stratigraphic baffles.

scholarly journals Characterization of reservoir sands using 3D seismic attributes in the coastal swamp area of Niger Delta Basin

2021 ◽  
Author(s):  
Oluwatoyin Khadijat Olaleye ◽  
Pius Adekunle Enikanselu ◽  
Michael Ayuk Ayuk
Keyword(s):  
Seismic Data ◽  
Niger Delta ◽  
Seismic Attributes ◽  
Effective Porosity ◽  
High Porosity ◽  
Hydrocarbon Accumulation ◽  
3D Seismic ◽  
Seismic Attribute ◽  
Niger Delta Basin

AbstractHydrocarbon accumulation and production within the Niger Delta Basin are controlled by varieties of geologic features guided by the depositional environment and tectonic history across the basin. In this study, multiple seismic attribute transforms were applied to three-dimensional (3D) seismic data obtained from “Reigh” Field, Onshore Niger Delta to delineate and characterize geologic features capable of harboring hydrocarbon and identifying hydrocarbon productivity areas within the field. Two (2) sand units were delineated from borehole log data and their corresponding horizons were mapped on seismic data, using appropriate check-shot data of the boreholes. Petrophysical summary of the sand units revealed that the area is characterized by high sand/shale ratio, effective porosity ranged from 16 to 36% and hydrocarbon saturation between 72 and 92%. By extracting attribute maps of coherence, instantaneous frequency, instantaneous amplitude and RMS amplitude, characterization of the sand units in terms of reservoir geomorphological features, facies distribution and hydrocarbon potential was achieved. Seismic attribute results revealed (1) characteristic patterns of varying frequency and amplitude areas, (2) major control of hydrocarbon accumulation being structural, in terms of fault, (3) prospective stratigraphic pinch-out, lenticular thick hydrocarbon sand, mounded sand deposit and barrier bar deposit. Seismic Attributes analysis together with seismic structural interpretation revealed prospective structurally high zones with high sand percentage, moderate thickness and high porosity anomaly at the center of the field. The integration of different seismic attribute transforms and results from the study has improved our understanding of mapped sand units and enhanced the delineation of drillable locations which are not recognized on conventional seismic interpretations.

REDUCING RESOURCE UNCERTAINTY USING SEISMIC AMPLITUDE ANALYSIS ON THE SOUTHERN RANKIN TREND, NORTHWEST AUSTRALIA

1999 ◽  
Vol 39 (1) ◽  
pp. 128 ◽  
Author(s):  
D. Sibley ◽  
F. Herkenhoff ◽  
D. Criddle ◽  
M. McLerie
Keyword(s):  
Seismic Attributes ◽  
3D Seismic ◽  
Amplitude Analysis ◽  
Seismic Amplitude ◽  
Amplitude Versus Offset ◽  
Minimum Number ◽  
Gas Fields ◽  
Resource Uncertainty

Between 1973 and 1996 West Australian Petroleum Pty Limited (WAPET) discovered five major gas fields on the southern Rankin Trend including Spar, West Tryal Rocks, Gorgon, Chrysaor, and Dionysus (collectively termed the Greater Gorgon Resource). Recent discoveries at Chrysaor and Dionysus emphasise the role of subtle 3D seismic attributes in finding hydrocarbons and defining reserves with a minimum number of wells.The Gorgon, Chrysaor, and Dionysus fields were covered by 3D seismic data shot in 1991 and 1995, which led WAPET to discover Chrysaor and later Dionysus. Subsequent to the 3D acquisitions, field reservoirs have been correlated with anomalous seismic events (seismic amplitude and amplitude versus offset) that conform to depth structure. Follow-up work has shown that combining these 3D seismic attributes improves the prediction of wet sands, gas sands, and other lithologies.The resulting understanding and confidence provided by this 3D seismic has driven an aggressive exploration program and defined field reserves at a high confidence level. Results include the recent award of permit area WA-267-P to WAPET and the ongoing studies to begin development of the Greater Gorgon Resource.

scholarly journals Application of 3D Seismic Attribute Analyses for Hydrocarbon Prospectivity in Uzot-Field, Onshore Niger Delta Basin, Nigeria

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
U. C. Omoja ◽  
T. N. Obiekezie
Keyword(s):  
Niger Delta ◽  
Hanging Wall ◽  
Average Energy ◽  
Maximum Amplitude ◽  
Seismic Attributes ◽  
Bright Spot ◽  
Maximum Magnitude ◽  
3D Seismic ◽  
Amplitude Maximum ◽  
Niger Delta Basin

3D seismic interpretative study was carried out across the Uzot-field in the western Coastal Swamp Depobelt of the onshore Niger Delta Basin, Nigeria, with the aim to identify possible hydrocarbon leads and prospects away from the drilled zone, utilizing seismic amplitude attributes. The method employed in this study involved systematic picking of faults and mapping of horizons/reservoir tops across seismic volume and extraction of seismic attributes. Structural analysis indicates the presence of down-to-basin footwall and hanging wall faults associated with rollover anticlines and horst-block (back-to-back fault). Generated time and depth structural maps from three reservoir intervals (D3100, D5000, and D9000) revealed the presence of fault dependent closure across the field. Analyses of relevant seismic attributes such as root-mean-square (RMS) amplitude, maximum amplitude, average energy amplitude, average magnitude amplitude, maximum magnitude attribute, and standard deviation amplitude, which were applied on reservoir tops, revealed sections with bright spot anomalies. These amplitude anomalies served as direct hydrocarbon indicators (DHIs), unravelling the presence and possible hydrocarbon prospective zones. In addition, structural top maps show that booming amplitude is seen within the vicinity of fault closures, an indication that these hydrocarbon prospects are structurally controlled. Results from this study have shown that, away from currently producing zone at the central part of the field, additional leads and prospects exist, which could be further evaluated for hydrocarbon production.

Sign in / Sign up

Export Citation Format

Share Document