Application of Seismic Sequence Stratigraphy for Delineating Mishrif Prospects in Western Onshore, Abu Dhabi, UAE

In Abu Dhabi, the Mishrif Formation is developed in the eastern and western parts conformably above the Shilaif Formation and forms several commercial discoveries. The present study was carried out to understand the development of the Mishrif Formation over a large area in western onshore Abu Dhabi and to identify possible Mishrif sweet spots as future drilling locations. To achieve this objective, seismic mapping of various reflectors below, above, and within the Mishrif Formation was attempted. From drilled wells all the available wireline data and cores were studied. Detailed seismic sequence stratigraphic analysis was carried out to understand the evolution of the Mishrif Formation and places where the good porosity-permeability development and oil accumulation might have happened. The seismic characters of the Mishrif Formation in dry and successful wells were studied and were calibrated with well data. The Mishrif Formation was deposited during Late Cretaceous Cenomanian time. In the study area it has a gross thickness ranging from 532 to 1,269 ft as derived from the drilled wells; the thickness rapidly decreases eastward toward the shelf edge and approaching the Shilaif basin. The Mishrif was divided into three third-order sequences based on core observations from seven wells and log signatures from 25 wells. The bottom-most sequence Mishrif 1.0 was identified is the thickest unit but was also found dry. The next identified sequence Mishrif 2.0 was also dry. The next and the uppermost sequence identified as Mishrif 3.0 shows a thickness from 123 to 328 ft. All the tested oil-bearing intervals lie within this sequence. This sequence was further subdivided into three fourth-order sequences based on log and core signatures; namely, Mishrif 3.1, 3.2, and 3.3. In six selected seismic lines of 181 Line Km (LKM) cutting across the depositional axis, seismic sequence stratigraphic analysis was carried out. In those sections all the visible seismic reflectors were picked using a stratigraphic interpretation software. Reflector groups were made to identify lowstand systems tract, transgressive systems tract, maximum flooding surface, and highstand systems tract by tying with the observations of log and core at the wells and by seismic signature. Wheeler diagrams were generated in all these six sections to understand the lateral disposition of these events and locales of their development. Based on stratigraphic analysis, a zone with likely grainy porous facies development was identified in Mishrif 3.0. Paleotopography at the top of Mishrif was reconstructed to help delineate areas where sea-level fall generated leaching-related sweet spots. Analysis of measured permeability data identified the presence of local permeability baffles affecting the reservoir quality and hydrocarbon accumulation. This study helped to identify several drilling locations based on a generic understanding of the Mishrif Formation. Such stratigraphic techniques can be successfully applied in similar carbonate reservoirs to identify the prospect areas.

Seismostratigraphic Interpretation of Upper Cretaceous Reservoir from the Carpathian Foreland, Southern Poland

The Upper Cretaceous complex in the central part of the Carpathian Foreland (southern Poland) is relatively poorly recognized and described. Its formations can be classified as unconventional reservoir due to poor reservoir properties as well as a low recovery factor. The main aim of the article is to expand knowledge with conclusions resulting from the analysis of the latest seismic data with the application of seismic sequence stratigraphy. Moreover, the seismic attributes analysis was utilized. The depositional architecture recognition based on both chronostratigraphic horizons and Wheeler diagram interpretations was of paramount importance. A further result was the possibility of using the chronostratigraphic image for tectonostratigraphic interpretation. Two distinguished tectonostratigraphic units corresponding to megasequences were recognized. A tectonic setting of the analyzed interval is associated with global processes noticed by other authors in other parts of the central European Late Cretaceous basin, but also locally accompanied by evidence of small-scale tectonics. This study fills the gap on the issue of paleogeography in the Late Cretaceous sedimentary basin of the Carpathian Foreland. It presents the first results of detailed reconstruction of the basin paleogeography and an attempt to determine the impact of both eustatic and tectonic factors on sedimentation processes.

Seismic depositional sequence characterization by using enhanced multi-channel variational mode decomposition

For the seismic stratigraphy, a key issue is distinguishing the characteristics of seismic reflections generated by geological events with different scales, which in turn assists the sequence stratigraphic interpretation. The data-driven signal decomposition approaches, like variational mode decomposition (VMD) and multi-channel variational mode decomposition (MVMD), can utilize waveform similarity to decompose seismic data into several IMFs. Unfortunately, it is a hard task to define the number of IMFs. To overcome the shortcoming of the previous works, we constructed an enhanced multi-channel variational mode decomposition (EMVMD) and then proposed a workflow to decompose seismic data. We first explained the relationship between the IMFs and structures with different scales. Then, we proposed a method to set the number of IMFs by introduce the contraction operator mapping (COM) and the scale-space representation (SSR). Finally, we provided a workflow and applied it to synthetic and field data to identify seismic sequence stratigraphy boundaries. Synthetic and field data examples show that our workflow preserves lateral continuity and precisely extracts IMFs caused by depositional sequences with different geologic scales, facilitating the interpretation of subtle depositional patterns.

Tectonic and Stratigraphic Evolution Based on Seismic Sequence Stratigraphy: Central Rift Section of the Campos Basin, Offshore Brazil

The rift section of the Brazilian basins represent the sedimentary record associated with the first stages of Gondwana break-up in the Early Cretaceous phase (Berriasian to Aptian). The rift succession of the Campos Basin constitutes one of the main petroleum systems of Brazil’s marginal basins. This interval contains the main source rock and important reservoirs in the Lagoa Feia Group deposits. The Lagoa Feia Group is characterized by siliciclastic, carbonate and evaporite sediments deposited during the rift and post-rift phases. Despite the economic relevance, little is known in stratigraphic terms regarding this rift interval. To date, most studies of the Lagoa Feia Group have adopted a lithostratigraphic approach, while this study proposes a tectonostratigraphic framework for the deep-rift succession of the Campos Basin (Lagoa Feia Group), using the fundamentals of seismic sequence stratigraphy. This work also aims to establish a methodological and practical procedure for the stratigraphic analysis of rift basins, using seismic data and seismofacies, and focusing on tectonicstratigraphic analysis. The dataset comprised 2D seismic lines, core and lithological logs from exploration wells. Three seismic facies were identified based on reflector patterns and lithologic data from well cores, providing an improved subdivision of the pre-, syn- and post-rift stages. The syn-rift stage was further subdivided based on the geometric patterns of the reflectors. Tectonics was the main controlling factor in the sedimentary succession, and the pattern and geometry of the seismic reflectors of the syn-rift interval in the Campos Basin allowed the identification of three tectonic systems tracts: (i) a Rift Initiation Systems Tract; (ii) a High Tectonic Activity Systems Tract and (iii) a Low Tectonic Activity Systems Tract.

Geomorphological Geometries and High-Resolution Seismic Sequence Stratigraphy of Malay Basin’s Fluvial Succession

This study identified the Pleistocene depositional succession of the group (A) (marine, estuarine, and fluvial depositional systems) of the Melor and Inas fields in the central Malay Basin from the seafloor to approximately −507 ms (522 m). During the last few years, hydrocarbon exploration in Malay Basin has moved to focus on stratigraphic traps, specifically those that existed with channel sands. These traps motivate carrying out this research to image and locate these kinds of traps. It can be difficult to determine if closely spaced-out channels and channel belts exist within several seismic sequences in map-view with proper seismic sequence geomorphic elements and stratigraphic surfaces seismic cross lines, or probably reinforce the auto-cyclic aggregational stacking of the avulsing rivers precisely. This analysis overcomes this challenge by combining well-log with three-dimensional (3D) seismic data to resolve the deposition stratigraphic discontinuities’ considerable resolution. Three-dimensional (3D) seismic volume and high-resolution two-dimensional (2D) seismic sections with several wells were utilized. A high-resolution seismic sequence stratigraphy framework of three main seismic sequences (3rd order), four Parasequences sets (4th order), and seven Parasequences (5th order) have been established. The time slice images at consecutive two-way times display single meandering channels ranging in width from 170 to 900 m. Moreover, other geomorphological elements have been perfectly imaged, elements such as interfluves, incised valleys, chute cutoff, point bars, and extinction surfaces, providing proof of rapid growth and transformation of deposits. The high-resolution 2D sections with Cosine of Phase seismic attributes have facilitated identifying the reflection terminations against the stratigraphic amplitude. Several continuous and discontinuous channels, fluvial point bars, and marine sediments through the sequence stratigraphic framework have been addressed. The whole series reveals that almost all fluvial systems lay in the valleys at each depositional sequence’s bottom bars. The degradational stacking patterns are characterized by the fluvial channels with no evidence of fluvial aggradation. Moreover, the aggradation stage is restricted to marine sedimentation incursions. The 3D description of these deposits permits distinguishing seismic facies of the abandoned mud channel and the sand point bar deposits. The continuous meandering channel, which is filled by muddy deposits, may function as horizontal muddy barriers or baffles that might isolate the reservoir body into separate storage containers. The 3rd, 4th, and 5th orders of the seismic sequences were established for the studied succession. The essential geomorphological elements have been imaged utilizing several seismic attributes.

Novel geometric classification of 3D seismic and its application to the Habshan clinoforms of Western Oman

The principles and benefits of seismic sequence stratigraphy have withstood the test of time, but the application of seismic sequence stratigraphy is still carried out mostly manually. Several tool kits have been developed to semiautomatically extract dense stacks of horizons from seismic data, but they stop short of exploiting the full potential of seismo-stratigraphic models. We introduce novel geometric seismic attributes that associate relative geologic age models with seismic geomorphological models. We propose that a relative sea level curve can be derived from the models. The approach is demonstrated on a case study from the Lower Cretaceous Kahmah Group in the northwestern part of Oman where it helps in sweet-spotting and derisking elusive stratigraphic traps.

Northeast British Columbia Liard Basin: A seismic stratigraphy study

The Liard Basin is a highly prospective shale gas basin located in northeast British Columbia that is largely underrepresented in public literature. We used available-for-purchase 2D seismic data in the area to create a high-level, regional stratigraphic interpretation of the basin, providing the first seismically controlled overview of the basin structure and stratigraphy. The basin is characterized by two distinct, opposing wedges of sediment in the Mesozoic and Paleozoic sections: the Mesozoic with northeastward thinning and the Paleozoic with southwestward thinning. The wedging of the Upper Devonian-Lower Mississippian (Tournasian) section is dominated by multiple large packages of clinoforms, which progress into the basin from northeast to southwest and are predominantly seen in the seismic sequence stratigraphy. These distinct packages of clinoforms indicate changing sediment sources over time. In contrast, there are no clinoforms seen in the Mesozoic section, which may be a limitation of the orientation of the 2D seismic data that we used. Our result from the seismic interpretation is an updated interpretation of the Upper Devonian-Lower Mississippian stratigraphy of the Liard Basin, including an updated stratigraphic cross section for the area.