The Active Elastic Model

2001 ◽  
pp. 36-49 ◽  
Author(s):  
Xenophon Papademetris ◽  
R. Todd Constable ◽  
E. Turan Onat ◽  
James S. Duncan ◽  
Albert J. Sinusas ◽  
...  
Keyword(s):  
Elastic Model

Effects of incomplete parameterization on full-wavefield viscoelastic seismic data for petrophysical reservoir properties

Geophysics ◽  
2007 ◽  
Vol 72 (3) ◽  
pp. O9-O17 ◽  
Author(s):  
Upendra K. Tiwari ◽  
George A. McMechan
Keyword(s):  
Seismic Data ◽  
Input Data ◽  
Elastic Model ◽  
Quality Factors ◽  
Noise Levels ◽  
Reservoir Properties ◽  
Estimated Parameters ◽  
Model Parameterization ◽  
The Earth ◽  
Incomplete Model

In inversion of viscoelastic full-wavefield seismic data, the choice of model parameterization influences the uncertainties and biases in estimating seismic and petrophysical parameters. Using an incomplete model parameterization results in solutions in which the effects of missing parameters are attributed erroneously to the parameters that are included. Incompleteness in this context means assuming the earth is elastic rather than viscoelastic. The inclusion of compressional and shear-wave quality factors [Formula: see text] and [Formula: see text] in inversion gives better estimates of reservoir properties than the less complete (elastic) model parameterization. [Formula: see text] and [Formula: see text] are sensitive primarily to fluid types and saturations. The parameter correlations are sensitive also to the model parameterization. As noise increases in the viscoelastic input data, the resolution of the estimated parameters decreases, but the parameter correlations are relatively unaffected by modest noise levels.

Evaluation of floor acceleration demands from the 2017 Mexico City code seismic provisions using a continuous elastic model and records of instrumented buildings

2020 ◽  
Vol 36 (2_suppl) ◽  
pp. 213-237
Author(s):  
Miguel A Jaimes ◽  
Adrián D García-Soto
Keyword(s):  
Mexico City ◽  
Seismic Design ◽  
Soft Soil ◽  
Response Spectra ◽  
Elastic Model ◽  
Ground Acceleration ◽  
Nonstructural Components ◽  
Floor Response Spectra ◽  
Instrumented Buildings ◽  
Floor Acceleration

This study presents an evaluation of floor acceleration demands for the design of rigid and flexible acceleration-sensitive nonstructural components in buildings, calculated using the most recent Mexico City seismic design provisions, released in 2017. This evaluation includes two approaches: (1) a simplified continuous elastic model and (2) using recordings from 10 instrumented buildings located in Mexico City. The study found that peak floor elastic acceleration demands imposed on rigid nonstructural components into buildings situated in Mexico City might reach values of 4.8 and 6.4 times the peak ground acceleration at rock and soft sites, respectively. The peak elastic acceleration demands imposed on flexible nonstructural components in all floors, estimated using floor response spectra, might be four times larger than the maximum acceleration of the floor at the point of support of the component for buildings located in rock and soft soil. Comparison of results from the two approaches with the current seismic design provisions revealed that the peak acceleration demands and floor response spectra computed with the current 2017 Mexico City seismic design provisions are, in general, adequate.

scholarly journals Holistic simulation of wind turbines with fully aero-elastic and electrical model

2021 ◽  
Author(s):  
Marcus Wiens ◽  
Sebastian Frahm ◽  
Philipp Thomas ◽  
Shoaib Kahn
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Low Voltage ◽  
Renewable Energy Sources ◽  
Elastic Model ◽  
Electrical Model ◽  
Holistic Model ◽  
Electric System ◽  
Electrical Components

AbstractRequirements for the design of wind turbines advance facing the challenges of a high content of renewable energy sources in the public grid. A high percentage of renewable energy weaken the grid and grid faults become more likely, which add additional loads on the wind turbine. Load calculations with aero-elastic models are standard for the design of wind turbines. Components of the electric system are usually roughly modeled in aero-elastic models and therefore the effect of detailed electrical models on the load calculations is unclear. A holistic wind turbine model is obtained, by combining an aero-elastic model and detailed electrical model into one co-simulation. The holistic model, representing a DFIG turbine is compared to a standard aero-elastic model for load calculations. It is shown that a detailed modelling of the electrical components e.g., generator, converter, and grid, have an influence on the results of load calculations. An analysis of low-voltage-ride-trough events during turbulent wind shows massive increase of loads on the drive train and effects the tower loads. Furthermore, the presented holistic model could be used to investigate different control approaches on the wind turbine dynamics and loads. This approach is applicable to the modelling of a holistic wind park to investigate interaction on the electrical level and simultaneously evaluate the loads on the wind turbine.

scholarly journals Dynamic pricing with demand disaggregation for hotel revenue management

2021 ◽  
Author(s):  
Andrei M. Bandalouski ◽  
Natalja G. Egorova ◽  
Mikhail Y. Kovalyov ◽  
Erwin Pesch ◽  
S. Armagan Tarim
Keyword(s):  
Dynamic Pricing ◽  
Programming Model ◽  
Computer Experiments ◽  
Price Policy ◽  
Linear Constraints ◽  
Economic Consequences ◽  
Elastic Model ◽  
Computationally Efficient ◽  
Data Set ◽  
Dynamic Price

AbstractIn this paper we present a novel approach to the dynamic pricing problem for hotel businesses. It includes disaggregation of the demand into several categories, forecasting, elastic demand simulation, and a mathematical programming model with concave quadratic objective function and linear constraints for dynamic price optimization. The approach is computationally efficient and easy to implement. In computer experiments with a hotel data set, the hotel revenue is increased by about 6% on average in comparison with the actual revenue gained in a past period, where the fixed price policy was employed, subject to an assumption that the demand can deviate from the suggested elastic model. The approach and the developed software can be a useful tool for small hotels recovering from the economic consequences of the COVID-19 pandemic.

PHASE-FIELD MODELING OF ELASTIC EFFECTS IN EUTECTIC GROWTH WITH MISFIT STRESSES

2012 ◽  
Vol 04 (01) ◽  
pp. 1250024
Author(s):  
ZOHREH EBRAHIMI ◽  
JOAO REZENDEH
Keyword(s):  
Phase Field ◽  
Elastic Energy ◽  
Field Model ◽  
Phase Field Model ◽  
Solidification Process ◽  
Eutectic Growth ◽  
Point Of View ◽  
Eutectic Solidification ◽  
Elastic Model ◽  
Sharp Interface Model

Elastic interactions, arising from a difference of lattice spacing between two coherent phases in eutectic alloys with misfit stresses, can have an influence on microstructural pattern formation of eutectic colonies during solidification process. From a thermodynamic point of view the elastic energy contributes to the free energy of the phases and modifies their mutual stability. Therefore, the elastic stresses will have an effect on stability of lamellae, lamellae spacing and growth modes. In this paper, a phase-field model is employed to investigate the influence of elastic misfits in eutectic growth. The model reduces to the traditional sharp-interface model in a thin-interface limit, where the microscopic interface width is small but finite. An elastic model is designed, based on linear microelasticity theory, to incorporate the elastic energy in the phase-field model. Theoretical and numerical approaches, required to model elastic effects, are formulated and the stress distributions in eutectic solidification structures are evaluated. The two-dimensional simulations are performed for directed eutectic growth and the simulation results for different values of the misfit stresses are illustrated.

scholarly journals Non-linear elastic model incorporating temperature effects

2018 ◽  
Vol 5 (1) ◽  
pp. 22-30 ◽  
Author(s):  
Hong Liu ◽  
Hanlong Liu ◽  
Yang Xiao ◽  
Qingsheng Chen ◽  
Yufeng Gao ◽  
...  
Keyword(s):  
Temperature Effects ◽  
Elastic Model ◽  
Linear Elastic ◽  
Linear Elastic Model ◽  
Non Linear

Numerical and experimental studies on the thermal and static characteristics of multi-leaf foil thrust bearing

2021 ◽  
pp. 135065012110110
Author(s):  
Yu Guo ◽  
Yu Hou ◽  
Qi Zhao ◽  
Xionghao Ren ◽  
Shuangtao Chen ◽  
...  
Keyword(s):  
High Speed ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Failure Process ◽  
Experimental Studies ◽  
Elastic Model ◽  
Static Characteristics ◽  
Bearing Load ◽  
Foil Thrust Bearing ◽  
Cooling Air

Foil bearing is considered to be a promising supporting technology in high-speed centrifugal machinery. Due to the high-speed shearing effect in the viscous lubricant film, heat generation could not be ignored. In this paper, a thermo-elastic model of the multi-leaf foil thrust bearing is proposed to predict its thermal and static characteristics. In the model, modified Reynolds equation, energy equation, and Kirchhoff equation are solved in a coupling way. The contact area between the foil and welding plate is taken into account. Besides, the effect of cooling air on the bearing temperature is investigated. The ultimate load capacity and transient overload failure process of the bearing is analyzed and discussed. The effect of rotation speed on the bearing temperature is more obvious than that of the bearing load. The bearing temperature drops obviously by introducing the cooling air, and the cooling effect is improved with the supply pressure. The transient overload failure of the bearing occurs when the bearing load exceeds the ultimate value.

scholarly journals Analytical modeling of synthetic fiber ropes. Part II: A linear elastic model for 1+6 fibrous structures

2007 ◽  
Vol 44 (9) ◽  
pp. 2943-2960 ◽  
Author(s):  
Seyed Reza Ghoreishi ◽  
Peter Davies ◽  
Patrice Cartraud ◽  
Tanguy Messager
Keyword(s):  
Analytical Modeling ◽  
Synthetic Fiber ◽  
Elastic Model ◽  
Linear Elastic ◽  
Linear Elastic Model

A Study on a Grade-One Type of Hypo-Elastic Models

2014 ◽  
Author(s):  
S. Alireza Momeni ◽  
Mohsen Asghari
Keyword(s):  
Constitutive Models ◽  
Specific Model ◽  
Elasticity Tensor ◽  
Elastic Model ◽  
Cauchy Stress ◽  
Spin Tensor ◽  
Positive Real ◽  
Corotational Rate ◽  
Deformation Rate Tensor ◽  
Grade One

In Hypo-elastic constitutive models an objective rate of the Cauchy stress tensor is expressed in terms of the current state of the stress and the deformation rate tensor D in a way that the dependency on the latter is a homogeneously linear one. In this work, a type of grade-one hypo-elastic models (i.e. models with linear dependency of the hypo-elasticity tensor on the stress) is considered for isotropic materials based on the objective corotational rates of stress. A positive real parameter denoted by n is involved in the considered type. Different values can be selected for this parameter, each selection leads to a specific model within the class of grade-one hypo-elasticity. The spin of the associated corotational rate is also dependent on the parameter n. In the special case of n=0, the corresponding hypo-elastic model reduces to a grade-zero one with the logarithmic rate of stress; noting that this rate is a corotational rate associated with the logarithmic spin tensor. Moreover, by choosing n=2, the model reduces to a grade-one hypo-elastic model with the Jaumann rate, i.e. the corotational rate associated with the vorticity spin tensor. As case studies, the simple shear problem is investigated with utilizing the considered type of hypo-elastic models with various values for parameter n, and the curves for the stress-shear response are depicted.

Sign in / Sign up

Export Citation Format

Share Document