Bending Stress

1969 ◽  
pp. 86-116 ◽  
Author(s):  
G. H. Ryder
Keyword(s):  
Bending Stress

Development of corrosion flaws for the production of realistic test specimens

2020 ◽  
Vol 64 (1) ◽  
pp. 23-28
Author(s):  
J. Hodač ◽  
Z. Fulín ◽  
P. Mareš ◽  
J. Veselá ◽  
O. Chocholatý
Keyword(s):  
Power Plants ◽  
Galvanic Corrosion ◽  
Water Solution ◽  
Erosive Wear ◽  
Corrosion Damage ◽  
Water Mist ◽  
Carbon Steels ◽  
Bending Stress ◽  
Solution Flow ◽  
Mechanical Bending

AbstractTo produce realistic test specimens with realistic flaws, it is necessary to develop appropriate procedure for corrosion flaw production. Tested specimens are made from steels commonly used in power plants, such as carbon steels, stainless steels and their dissimilar weldments. In this study, corrosion damage from NaCl water solution and NaCl water mist are compared. Specimens were tested with and without mechanical bending stress. The corrosion processes produced plane, pitting and galvanic corrosion. On dissimilar weldments galvanic corrosion was observed and resulted to the deepest corrosion damage. Deepest corrosion flaws were formed on welded samples. The corrosion rate was also affected by the solution flow in a contact with the specimens, which results in a corrosion-erosive wear. Produced flaws are suitable as natural crack initiators or as realistic corrosion flaws in test specimens.

Development of the mathematical model for assessing the optimal measurement step when surveying the depth of the underground pipeline from the ground

2020 ◽  
Vol 10 (4) ◽  
pp. 364-371
Author(s):  
Ruslan V. Aginey ◽  
◽  
Rustem R. Islamov ◽  
Alexey A. Firstov ◽  
Elmira A. Mamedova ◽  
...  
Keyword(s):  
Mathematical Models ◽  
Survey Data ◽  
Ground Surface ◽  
Maximum Error ◽  
Large Error ◽  
Bending Stress ◽  
Buried Pipeline ◽  
Optimal Measurement ◽  
Pipeline Section ◽  
Bending Stresses

Existing methods for estimating the bending stresses of buried pipeline section based on the survey data for the depth of the axis of the pipeline from the ground surface are characterized by a large error between the real values of the bending stress and the values of the bending stress obtained from the calculation results based on the survey data. The purpose of this study is to improve the methodology for calculating the bending stresses of buried pipeline section based on the results of determining the depth of the axis of the pipeline from the ground surface, taking into account the design features of the pipeline and the used search equipment. Mathematical models are proposed that allow for the set value of the maximum error in determining bending stresses for a particular pipeline to choose the optimal measurement step before the survey, which will allow to reduce the error. Explanations are given on the choice of the maximum step of the study based on the strength characteristics of the pipeline. A calculation is provided that confirms the adequacy of the developed mathematical models and the possibility of their application in practice.

Analisa Bending Stress Pada Submerged Floating Tunnel

2019 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Ahmad Syafiul Mujahid ◽  
Wibowo Harso Nugroho
Keyword(s):  
Structural Analysis ◽  
Bending Stress ◽  
Submerged Floating Tunnel

Perhitungan dengan pemodelan Submerged Floating Tunnel (SFT) dengan menggunakan perangkat lunak berbasis metode elemen hingga. Analisa struktur terowongan apung menggunakan prinsip kerja dengan mendiskripsikan seluruh beban (force) pada SFT berupa beban internal dan eksternal yang bekerja akan diperoleh momen reaksi yang terjadi sepanjang badan SFT, dengan mengetahui luas penampang melintang SFT maka dapat diperoleh bending stress di seluruh badan SFT.Keywords : submerged floating tunnel (SFT), bending stress, structural analysis

scholarly journals Design and manufacture of the novel drum worm pair

2020 ◽  
Vol 103 (4) ◽  
pp. 003685042098122
Author(s):  
Jingzi Zhang ◽  
Jin’ge Wang ◽  
Kai Wang
Keyword(s):  
Contact Stresses ◽  
Primary Objective ◽  
Structure Design ◽  
Worm Gear ◽  
The Novel ◽  
Bending Stress ◽  
Manufacturing Method ◽  
Design And Manufacture ◽  
Maximum Contact ◽  
Worm Drive

Although a significant amount of research on robot joint reducer was conducted, there are few systematic investigations on a novel joint reducer adopting inner worm-gear plane enveloping drum worm drive. To satisfy the development of modular robot joint, the primary objective of this paper was to systematically investigate the drum worm drive adopted in the novel joint reducer with integrated structure of drive, transmission, and support in the following aspects: meshing theory, design, analysis, and manufacture. According to the gear meshing theory, mechanical design method, classical mechanics, finite element method, and machining principle of virtual center distance, the systematic investigations around the drum worm pair applied in the novel joint reducer were conducted including the macro and micro meshing theory, structure design, mechanical and contact properties analyses, and manufacturing method. The novel joint reducer’s integrated structure was designed, and the drum worm pair’s mechanical and contact properties analyses were conducted, which showed: (1) the worm’s bending stress and deflection, worm-gear teeth’s shear stress and bending stress as well as the maximum contact stresses were all below their corresponding allowable values; (2) the maximum contact stresses appeared at the engage-in position of the worm pair opposing to the engaging-out position where the largest contact areas appeared. Then the manufacturing of drum worm’s spiral tooth was conducted via the modified 4-axis linkage CNC grinder according to the conjugate motion. Finally the novel joint reducer’s industrial prototype was assembled. The novel joint reducer with integrated structure of drive, transmission and support was designed and manufactured for the first time. The flowchart of design and manufacture of the reducer’s drum worm pair in this process was formulated, which provides a new insight on the research of joint reducers as well as other fields.

Buckling of open cylindrical shells under combined compression and bending stress

AIAA Journal ◽  
1977 ◽  
Vol 15 (3) ◽  
pp. 322-328
Author(s):  
G. Krishnamoorthy ◽  
Balbir S. Narang
Keyword(s):  
Cylindrical Shells ◽  
Bending Stress

Comparative study of stress analysis of gears with different helix angle using the ISO 6336 standard and tooth contact analysis methods

2016 ◽  
Vol 230 (7-8) ◽  
pp. 1350-1358 ◽  
Author(s):  
Layue Zhao ◽  
Robert C Frazer ◽  
Brian Shaw
Keyword(s):  
Stress Analysis ◽  
Contact Stress ◽  
Helix Angle ◽  
Contact Analysis ◽  
Bending Stress ◽  
Contact Ratio ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Iso Standard ◽  
Analysis Methods

With increasing demand for high speed and high power density gear applications, the need to optimise gears for minimum stress, noise and vibration becomes increasingly important. ISO 6336 contact and bending stress analysis are used to determine the surface load capacity and tooth bending strength but dates back to 1956 and although it is constantly being updated, a review of its performance is sensible. Methods to optimise gear performance include the selection of helix angle and tooth depth to optimise overlap ratio and transverse contact ratio and thus the performance of ISO 6336 and tooth contact analysis methods requires confirmation. This paper reviews the contact and bending stress predicted with four involute gear geometries and proposes recommendations for stress calculations, including a modification to contact ratio factor Zɛ which is used to predict contact stress and revisions to form factor YF and helix angle factor Yβ which are cited to evaluate bending stress. The results suggest that there are some significant deviations in predicted bending and contact stress values between proposal methods and original ISO standard. However, before the ISO standard is changed, the paper recommends that allowable stress numbers published in ISO 6336-5 are reviewed because the mechanisms that initiate bending and contact fatigue have also changed and these require updating.

Weak-Link Analysis of Motor-Operated Butterfly Valve

2002 ◽  
Author(s):  
Donghae Kim
Keyword(s):  
Structural Integrity ◽  
Weak Link ◽  
Link Analysis ◽  
Seismic Load ◽  
Seismic Loads ◽  
Static Force ◽  
Bending Stress ◽  
Butterfly Valve ◽  
Load Path ◽  
Valve Assembly

The purpose of this paper is to address the structural integrity of the motor operated butterfly valve assembly by providing the methodology and equations to quantitatively determine the permissible component load in the load path from the operator to the valve. The weak link analysis is to determine the maximum allowable torque on the butterfly valve by equating the stresses caused by the torque and seismic load with the appropriate allowable stress value, and then the unknown torque is solved. Analysis methods are based on classical static force balancing equations and on classical axial, shear, and bending stress equations using the worst possible load combinations including seismic loads resulting from design basis earthquake.

Investigation of Nanometric Thin-Film Bismuth Piezoresistors Deposited on Silicon Substrates

2012 ◽  
Vol 1477 ◽  
Author(s):  
Horacio V. Estrada
Keyword(s):  
Thin Film ◽  
Axial Strain ◽  
High Sensitivity ◽  
Metal Alloys ◽  
Silicon Substrates ◽  
Transverse Strain ◽  
Bending Stress ◽  
Pure Bending ◽  
Strain Fields ◽  
Strain Axis

ABSTRACTThin film bismuth piezoresistors, defined on oxidized silicon wafers, are investigated as a function of their orientation for their eventual integration on micro-electro-mechanical (MEMS) microsensors. Bismuth’s piezoresistance (or elasto-resistance) is experimentally investigated to accurately determine its longitudinal and transverse strain sensitivities. Whisker-shaped resistive elements defined on different orientations (from 0o, the beam’s main strain axis, to 90o, perpendicular to that axis) undergo changes of resistance (ΔR), associated with the induced strains on silicon cantilevers beam’s surface when these are mechanically loaded under pure bending stress conditions. For Bi-resistors, the traditional gage factor concept, (ΔR/Ro)/εl, is found to be equal to +16 and +33, for elements oriented along 0 and 90o, respectively, considerably larger than those for metals or metal alloys. These high sensitivity values and the “unusual” positive, higher value for the 90o (perpendicular) resistors can be of considerable interest for microsensors applications. The results of this study enable us to precisely determine the bismuth’s longitudinal and transverse strain sensitivities that are calculated to be equal to +26 and +40.5 respectively. This experimental study is extended to explore the Bi-films’ response to bi-axial strain fields.

Effects of SiO2 interlayer on electrical properties of Al-doped ZnO films under bending stress

2012 ◽  
Vol 8 (4) ◽  
pp. 375-379 ◽  
Author(s):  
Young Soo Lim ◽  
Seul Gi Seo ◽  
Bo Bae Kim ◽  
Hyoung-Seuk Choi ◽  
Won-Seon Seo ◽  
...  
Keyword(s):  
Electrical Properties ◽  
Zno Films ◽  
Bending Stress ◽  
Doped Zno
Sign in / Sign up

Export Citation Format

Share Document