Thermomechanical Analysis of Frozen Aqueous Systems

1991 ◽  
pp. 215-223 ◽  
Author(s):  
T. J. Maurice ◽  
Y. J. Asher ◽  
S. Thomson
Keyword(s):  
Thermomechanical Analysis ◽  
Aqueous Systems

THERMOMECHANICAL ANALYSIS OF THE RESISTANCE SPOT-WELDING PROCESS

2018 ◽  
Vol 10 (5) ◽  
pp. 449-455 ◽  
Author(s):  
Habib Lebbal ◽  
Lahouari Boukhris ◽  
Habib Berrekia ◽  
Abdelkader Ziadi
Keyword(s):  
Resistance Spot Welding ◽  
Spot Welding ◽  
Welding Process ◽  
Thermomechanical Analysis ◽  
Resistance Spot

A Novel Approach for Thermomechanical Analysis of Stationary Rolling Tires within an ALE–Kinematic Framework

2013 ◽  
Vol 41 (3) ◽  
pp. 174-195 ◽  
Author(s):  
Anuwat Suwannachit ◽  
Udo Nackenhorst
Keyword(s):  
Constitutive Model ◽  
Numerical Solutions ◽  
Numerical Technique ◽  
Thermomechanical Analysis ◽  
Rolling Contact ◽  
Computational Technique ◽  
Heat Equations ◽  
Arbitrary Lagrangian Eulerian ◽  
Material Particle ◽  
Operator Split

ABSTRACT A new computational technique for the thermomechanical analysis of tires in stationary rolling contact is suggested. Different from the existing approaches, the proposed method uses the constitutive description of tire rubber components, such as large deformations, viscous hysteresis, dynamic stiffening, internal heating, and temperature dependency. A thermoviscoelastic constitutive model, which incorporates all the mentioned effects and their numerical aspects, is presented. An isentropic operator-split algorithm, which ensures numerical stability, was chosen for solving the coupled mechanical and energy balance equations. For the stationary rolling-contact analysis, the constitutive model presented and the operator-split algorithm are embedded into the Arbitrary Lagrangian Eulerian (ALE)–relative kinematic framework. The flow of material particles and their inelastic history within the spatially fixed mesh is described by using the recently developed numerical technique based on the Time Discontinuous Galerkin (TDG) method. For the efficient numerical solutions, a three-phase, staggered scheme is introduced. First, the nonlinear, mechanical subproblem is solved using inelastic constitutive equations. Next, deformations are transferred to the subsequent thermal phase for the solution of the heat equations concerning the internal dissipation as a source term. In the third step, the history of each material particle, i.e., each internal variable, is transported through the fixed mesh corresponding to the convective velocities. Finally, some numerical tests with an inelastic rubber wheel and a car tire model are presented.

Modifiers for Rigid Polyvinylchloride Compositions of Building Purpose

2020 ◽  
Vol 787 (12) ◽  
pp. 34-39
Author(s):  
L.A. Abdrakhmanova ◽  
◽  
K.R. Khuziakhmetova ◽  
R.K. Nizamov ◽  
V.G. Khozin ◽  
...  
Keyword(s):  
Phase Interface ◽  
Thermomechanical Analysis ◽  
Favorable Effect ◽  
Heterogeneous Structure ◽  
Electron Microscopic ◽  
Wear And Tear ◽  
Thermomechanical Testing ◽  
Building Purpose ◽  
Microscopy Data ◽  
Butadiene Styrene

A comparison of small doses (up to 0.7 mass part) of impact strength modifiers of foreign and domestic production in polyvinylchloride-based compositions is given. Domestic acrylicnitrile- butadiene styrene modifiers (ABS) were used. The developed shock-resistant polyvinylchloride compositions in the presence of ABS elastifier have high melt fluidity, which has a beneficial effect on the recyclability. Changes in supramolecular structure were estimated from thermomechanical testing and electron microscopy data for both unfilled and filled PVC samples. Thermomechanical analysis showed that the presence of ABS modifier had a favorable effect on the technological properties of PVC-based samples. Electron-microscopic images indicate that in unfilled PVC samples, the heterogeneous PVC structure is expressed in the presence of ABS copolymer in comparison with foreign acrylic modifiers. When the compositions are filled with micro-heterogeneous structure in dispersion medium, the filler-polymer is formed by chalk particles, while ABS elasticifier is at the phase interface. Due to the peculiarities of the structure ABS has a higher degree of “fixation” on the surface of the chalk particles in comparison with the basic compositions containing acrylic modifiers, which with increasing chalk concentration leads to lower wear and tear on the top of the forming equipment.

Plutonium release from radioisotope heat sources into aqueous systems

1989 ◽  
Author(s):  
R.C. Heaton ◽  
W.M. Jones ◽  
K.P. Coffelt
Keyword(s):  
Heat Sources ◽  
Aqueous Systems

scholarly journals The Effect of Surface Treatment with Isocyanate and Aromatic Carbodiimide of Thermally Expanded Vermiculite Used as a Functional Filler for Polylactide-Based Composites

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 890
Author(s):  
Mateusz Barczewski ◽  
Olga Mysiukiewicz ◽  
Aleksander Hejna ◽  
Radosław Biskup ◽  
Joanna Szulc ◽  
...  
Keyword(s):  
Impact Strength ◽  
Mechanical Stability ◽  
Thermomechanical Analysis ◽  
Thermomechanical Properties ◽  
Phenyl Isocyanate ◽  
Sem Analysis ◽  
Scanning Calorimetry ◽  
Melt Mixing ◽  
Expanded Vermiculite ◽  
Chain Extenders

In this work, thermally expanded vermiculite (TE-VMT) was surface modified and used as a filler for composites with a polylactide (PLA) matrix. Modification of vermiculite was realized by simultaneous ball milling with the presence of two PLA chain extenders, aromatic carbodiimide (KI), and 4,4’-methylenebis(phenyl isocyanate) (MDI). In addition to analyzing the particle size of the filler subjected to processing, the efficiency of mechanochemical modification was evaluated by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The composites of PLA with three vermiculite types were prepared by melt mixing and subjected to mechanical, thermomechanical, thermal, and structural evaluation. The structure of composites containing a constant amount of the filler (20 wt%) was assessed using FTIR spectroscopy and SEM analysis supplemented by evaluating the final injection-molded samples’ physicochemical properties. Mechanical behavior of the composites was assessed by static tensile test and impact strength hardness measurements. Heat deflection temperature (HDT) test and dynamic thermomechanical analysis (DMTA) were applied to evaluate the influence of the filler addition and its functionalization on thermomechanical properties of PLA-based composites. Thermal properties were assessed by differential scanning calorimetry (DSC), pyrolysis combustion flow calorimetry (PCFC), and thermogravimetric analysis (TGA). The use of filler-reactive chain extenders (CE) made it possible to change the vermiculite structure and obtain an improvement in interfacial adhesion and more favorable filler dispersions in the matrix. This translated into an improvement in impact strength and an increase in thermo-mechanical stability and heat release capacity of composites containing modified vermiculites.

Sign in / Sign up

Export Citation Format

Share Document