Services of Energy Storage Technologies in Renewable-Based Power Systems

Author(s):  
Francisco Díaz-González ◽  
Eduard Bullich-Massagué ◽  
Cristina Vitale ◽  
Marina Gil-Sánchez ◽  
Mònica Aragüés-Peñalba ◽  
...  
Author(s):  
Omar J Guerra ◽  
Joshua Eichman ◽  
Paul Denholm

Achieving 100% carbon-free or renewable power systems can be facilitated by the deployment of energy storage technologies at all timescales, including short-duration, long-duration, and seasonal scales; however, most current literature...


Author(s):  
Eoghan McKenna ◽  
John Barton ◽  
Murray Thomson

This article studies the impact on CO2 emissions of electrical storage systems in power systems with high penetrations of wind generation. Using the Irish All-Island power system as a case-study, data on the observed dispatch of each large generator for the years 2008 to 2012 was used to estimate a marginal emissions factor of 0.547 kgCO2/kWh. Selected storage operation scenarios were used to estimate storage emissions factors – the carbon emissions impact associated with each unit of storage energy used. The results show that carbon emissions increase in the short-run for all storage technologies when consistently operated in ‘peak shaving and trough filling’ modes, and indicate that this should also be true for the GB and US power systems. Carbon emissions increase when storage is operated in ‘wind balancing’ mode, but reduce when storage is operated to reduce wind power curtailment, as in this case wind power operates on the margin. For power systems where wind is curtailed to maintain system stability, the results show that energy storage technologies that provide synthetic inertia achieve considerably greater carbon reductions. The results highlight a tension for policy makers and investors in storage, as scenarios based on the operation of storage for economic gains increase emissions, while those that decrease emissions are unlikely to be economically favourable. While some scenarios indicate storage increases emissions in the short-run, these should be considered alongside long-run assessments, which indicate that energy storage is essential to the secure operation of a fossil fuel-free grid.


2018 ◽  
Vol 19 (6) ◽  
pp. 452-457
Author(s):  
Kamil Hebda ◽  
Marta Żurek-Mortka ◽  
Renata Repeć

Implementation of dynamic energy storage technology and its integration with the power system represents another important step in the development of the energy sector. This article discusses the advancement of superconducting energy storage technologies and the possibilities of their use in power engineering as well as other branches of industry. It also presents the perspective of applications of superconducting energy storage type SMES (Superconducting Magnetic Energy Storage) both for commercial and industrial applications and their impact on power grid. The article analyzes the functions that systems can use with the use of a superconductor in the power system. The functionality of SMES systems has been analyzed in particular from the point of view of its use in railways.


2020 ◽  
Vol 13 (7) ◽  
pp. 1909-1922 ◽  
Author(s):  
Omar J. Guerra ◽  
Jiazi Zhang ◽  
Joshua Eichman ◽  
Paul Denholm ◽  
Jennifer Kurtz ◽  
...  

Energy storage at all timescales, including the seasonal scale, plays a pivotal role in enabling increased penetration levels of wind and solar photovoltaic energy sources in power systems.


2020 ◽  
Vol 8 ◽  
Author(s):  
Jiazi Zhang ◽  
Omar J. Guerra ◽  
Joshua Eichman ◽  
Matthew A. Pellow

The integration of high shares of variable renewable energy raises challenges for the reliability and cost-effectiveness of power systems. The value of long-duration energy storage, which helps address variability in renewable energy supply across days and seasons, is poised to grow significantly as power systems shift to larger shares of variable generation such as wind and solar. This study explores the system-level services and associated benefits of long-duration energy storage on the 2050 Western Interconnection (WI). The operation of the future WI system with 85% renewable penetration is simulated using a two-stage production cost model. The impact of long duration energy storage on systemwide operations is examined for the 2050 WI system, using a range of round-trip efficiencies corresponding to four different energy storage technologies. The analysis projects the energy storage dispatch profile, system-wide production cost savings (from both diurnal and seasonal operation), and impacts on generation mix, and change in renewable generation curtailment.


Sign in / Sign up

Export Citation Format

Share Document