The article presents a reasonable analysis and relevance of the study of the drying process of vegetable raw materials (colloidal capillary-porous materials). Drying is an energy-intensive industrial process that is defined from a technological point of view: on the one hand by heat and moisture exchange between the body surface and the environment, on the other hand by heating the body and transferring moisture inside it due to the form of moisture. One of the most effective ways to increase the shelf life of food is to dry it to equilibrium humidity. Very important are the technological parameters of the drying regimes, which, when used rationally, are able to preserve the biochemical properties and nutrients of the raw material at a high level in the obtained dry product. The study of dehydration of vegetable raw materials is widely practiced around the world, especially in countries such as Germany, France, USA, Argentina, Hungary, Brazil, Poland, Korea, China, Malaysia. However, the obtained processed products lose their biologically active components and nutrients, and the processing process is energy consuming. Therefore, the problem is relevant and needs an effective solution. In this paper, the kinetics of the drying process, thermogravimetric studies and a mathematical model for colloidal capillary-porous materials of plant origin were analyzed. According to the results of the highlighted research, the process of convective drying of colloidal capillary-porous materials was intensified above 21% due to the use of innovative step regimes. The developed beet-rhubarb composition is a colloidal capillary-porous material that stabilizes and protects at the biochemical level betanin of the beet from the effects of temperature during convective drying, has in comparison with the components of the composition lower heat of dehydration and increased thermal-stability. Prolonged high-temperature exposure causes instant complete destruction of sugars, proteins and other nutrients components. Derivatographic studies have confirmed that the use of the temperature range of 100 ° C in a stepwise mode of 100/60 ° C for the developed soybean-spinach composition is safe for biologically active substances and it is justified by experimental temperature curves. Numerical modeling of heat and mass transfer during convective drying of crushed beets and crushed soybeans using the known model by A.V. Lykov satisfactorily describes the process and can be used to model the convection drying of colloidal capillary-porous materials.
3D simulation on convective drying process for cylindrical tea particle using CFD software to analyze the heat and mass transfer phenomena
