Dynamics of Plate Structures

1991 ◽  
pp. 214-234 ◽  
Author(s):  
R. Heuer ◽  
H. Irschik ◽  
F. Ziegler
Keyword(s):  
1991 ◽  
Vol 1991 (170) ◽  
pp. 483-491 ◽  
Author(s):  
Hiroo Okada ◽  
Yoshisada Murotsu ◽  
Keiji Ueyama ◽  
Minoru Harada ◽  
Kazuya Kondo

2021 ◽  
pp. 1-1
Author(s):  
Zhipeng Ma ◽  
Xiaojun Jin ◽  
Yixuan Guo ◽  
Tengfei Zhang ◽  
Yiming Jin ◽  
...  

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1976
Author(s):  
Tomasz Garbowski ◽  
Tomasz Gajewski

Knowing the material properties of individual layers of the corrugated plate structures and the geometry of its cross-section, the effective material parameters of the equivalent plate can be calculated. This can be problematic, especially if the transverse shear stiffness is also necessary for the correct description of the equivalent plate performance. In this work, the method proposed by Biancolini is extended to include the possibility of determining, apart from the tensile and flexural stiffnesses, also the transverse shear stiffness of the homogenized corrugated board. The method is based on the strain energy equivalence between the full numerical 3D model of the corrugated board and its Reissner-Mindlin flat plate representation. Shell finite elements were used in this study to accurately reflect the geometry of the corrugated board. In the method presented here, the finite element method is only used to compose the initial global stiffness matrix, which is then condensed and directly used in the homogenization procedure. The stability of the proposed method was tested for different variants of the selected representative volume elements. The obtained results are consistent with other technique already presented in the literature.


Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3926
Author(s):  
Mengen Li ◽  
Qiaoyun Zhang ◽  
Bingbing Wang ◽  
Minghao Zhao

The performance of devices fabricated from piezoelectric semiconductors, such as sensors and actuators in microelectromechanical systems, is superior; furthermore, plate structures are the core components of these smart devices. It is thus important to analyze the electromechanical coupling properties of piezoelectric semiconductor nanoplates. We established a nanoplate model for the piezoelectric semiconductor plate structure by extending the first-order shear deformation theory. The flexural vibrations of nanoplates subjected to a transversely time-harmonic force were investigated. The vibrational modes and natural frequencies were obtained by using the matrix eigenvalue solver in COMSOL Multiphysics 5.3a, and the convergence analysis was carried out to guarantee accurate results. In numerical cases, the tuning effect of the initial electron concentration on mechanics and electric properties is deeply discussed. The numerical results show that the initial electron concentration greatly affects the natural frequency and electromechanical fields of piezoelectric semiconductors, and a high initial electron concentration can reduce the electromechanical fields and the stiffness of piezoelectric semiconductors due to the electron screening effect. We analyzed the flexural vibration of typical piezoelectric semiconductor plate structures, which provide theoretical guidance for the development of new piezotronic devices.


1990 ◽  
Vol 87 (S1) ◽  
pp. S163-S163
Author(s):  
Y. Yong ◽  
G. Mani

1981 ◽  
Vol 13 (9) ◽  
pp. 1086-1090
Author(s):  
M. I. Burak ◽  
V. V. Larionov ◽  
N. A. Makhutov ◽  
V. M. Tarasov

Sign in / Sign up

Export Citation Format

Share Document