Effect of Fiber Grid Reinforcement on Crack Initiation and Propagation in Asphalt Concrete

2016 ◽  
pp. 55-60
Author(s):  
Xiaofeng Gao ◽  
Georg Koval ◽  
Cyrille Chazallon
Keyword(s):  
Crack Initiation ◽  
Asphalt Concrete ◽  
Crack Initiation And Propagation ◽  
Initiation And Propagation ◽  
Grid Reinforcement

The Influence of Copper Addition on Crack Initiation and Propagation in an Al-Si-Mg Alloy During Cyclic Testing

2020 ◽  
Author(s):  
Toni Bogdanoff ◽  
Lucia Lattanzi ◽  
Mattia Merlin ◽  
Ehsan Ghassemali ◽  
Salem Seifeddine
Keyword(s):  
Crack Initiation ◽  
Mg Alloy ◽  
Cyclic Testing ◽  
Crack Initiation And Propagation ◽  
Copper Addition ◽  
Initiation And Propagation

Fatigue crack paths and properties in A356-T6 aluminum alloy microstructurally modified by friction stir processing under different conditions

2015 ◽  
Author(s):  
A. Tajiri ◽  
Y. Uematsu ◽  
T. Kakiuchi ◽  
Y. Suzuki
Keyword(s):  
Aluminum Alloy ◽  
Fatigue Crack ◽  
Crack Initiation ◽  
Friction Stir Processing ◽  
Casting Defects ◽  
Processing Conditions ◽  
Tool Rotational Speed ◽  
Crack Initiation And Propagation ◽  
Friction Stir ◽  
Initiation And Propagation

A356-T6 cast aluminum alloy is a light weight structural material, but fatigue crack initiates and propagates from a casting defect leading to final fracture. Thus it is important to eliminate casting defects. In this study, friction stir processing (FSP) was applied to A356-T6, in which rotating tool with probe and shoulder was plunged into the material and travels along the longitudinal direction to induce severe plastic deformation, resulting in the modification of microstructure. Two different processing conditions with low and high tool rotational speeds were tried and subsequently fully reversed fatigue tests were performed to investigate the effect of processing conditions on the crack initiation and propagation behavior. The fatigue strengths were successfully improved by both conditions due to the elimination of casting defects. But the lower tool rotational speed could further improve fatigue strength than the higher speed. EBSD analyses revealed that the higher tool rotational speed resulted in the severer texture having detrimental effects on fatigue crack initiation and propagation resistances.

Sign in / Sign up

Export Citation Format

Share Document