IoT-Based Traffic Congestion and Safety Management with Street Light Control System

2020 ◽  
pp. 495-501
Author(s):  
Utkarsh Maheria ◽  
C. Fancy ◽  
M. Anand
Keyword(s):  
Control System ◽  
Traffic Congestion ◽  
Safety Management ◽  
Light Control

scholarly journals TRAFFIC LIGHT CONTROL USING FUZZY LOGIC MAMDANI METHOD

2019 ◽  
Vol 3 (1) ◽  
pp. 1-10
Author(s):  
Paula Juniana ◽  
Lukman Hakim
Keyword(s):  
Fuzzy Logic ◽  
Control System ◽  
Traffic Congestion ◽  
Green Light ◽  
Light Control ◽  
Traffic Light ◽  
Additional Time ◽  
Traffic Lights ◽  
Traffic Jams ◽  
Traffic Light Control

Traffic congestion is a common occurrence in Indonesia. Traffic congestion is increasing from year to year, causing many things to happen, such as longer travel time, increased transportation costs, serious disruptions to transporting products, decreasing levels of work productivity, and wasteful use of labor energy. Congestion is also caused by a traffic light control system that is made with a fixed time so it can not detect the density of certain paths. Traffic lights in Indonesia, frequent damage that makes the density and the flow of his road vehicles can not be controlled. From these problems, conducted research to reduce the density of vehicles using infrared sensors and see the waiting time of the vehicle when the red light. The traffic light control system will use Fuzzy Logic Mamdani method. In Mamdani method by applying fuzzy into each variable and will be done matching between rule with condition which fulfilled to determine contents of output to be executed by prototype. This congestion detection will help the system in controlling the green light time by looking at stable, medium, and traffic jams. When the bottleneck starts to detect, the prototype will add a green light time according to the condition that is 0 seconds, 5 seconds, 10 seconds, and 15 seconds. However, when the streets are not detected by traffic jams, the green light will be back to normal at 15 seconds without additional time

scholarly journals Implementation of Fuzzy Mamdani Method for Traffic Lights Smart City in Rangkasbitung, Lebak Regency, Banten Province (Case Study of the Traffic Light T-junction, Cibadak, By Pas Sukarno Hatta Street)

KOMTEKINFO ◽  
2020 ◽  
Vol 7 (3) ◽  
pp. 176-185
Author(s):  
Dentik Karyaningsih ◽  
Robby Rizky
Keyword(s):  
Fuzzy Logic ◽  
Control System ◽  
Traffic Congestion ◽  
Fuzzy Logic Controller ◽  
Fuzzy Inference ◽  
Light Control ◽  
Traffic Light ◽  
Traffic Lights ◽  
Traffic Jams ◽  
Traffic Light Control

Traffic jams are a common sight that can be seen in almost all major cities in Indonesia. One of them is in Rangkasbitung City, Lebak Regency. This happens because the number of vehicles continues to increase. The traffic light control system implemented in Indonesia is a static preset time because the time of each phase is predetermined. This type of control system is still not effective in overcoming traffic congestion, especially at certain peak traffic jams. By using the Mamdani fuzzy logic system, it is possible to implement the human mindset into a system. Some rules can be set out in the fuzzy logic controller. The purpose of this study is to design a traffic light control system using fuzzy inference that regulates traffic based on its density. The data used are observations made at the research site. The conclusion of this study is to explain that the fuzzy mamdani method can solve existing problems in traffic congestion in Rangkasbitung City, Lebak Regency, Banten Province

scholarly journals Adaptive Traffic Light Control Based on Actual Condition Using Google Map API

2019 ◽  
Vol 3 (2) ◽  
pp. 61
Author(s):  
Adi Sabwa Isti Besari Arkanuddin ◽  
Selo Sulistyo ◽  
Anugerah Galang Persada
Keyword(s):  
Control System ◽  
Traffic Control ◽  
Traffic Congestion ◽  
Actual Condition ◽  
Light Control ◽  
Traffic Light ◽  
Road Density ◽  
Traffic Light Control ◽  
Traffic Control System ◽  
Google Map Api

Traffic congestion is one of the main problems in transportation sector and it causes a lot of drawbacks to public. The traffic light system is used to reduce the level of occurring traffic congestion. Generally, the available traffic light systems use a fixed time setting. This old traffic control system is no longer able to manage the ever-changing traffic conditions effectively and efficiently, causing a long queue of vehicles. To overcome this problem, a traffic light control system that can adapt to actual conditions of road density and can run automatically is offered. This system utilizes Google Map API as a road density data source. The result of this study is a traffic control system that can adjust the green light time duration based on the obtained density values and density trends, simulation of this adaptive system as well as simulation results analysis. A prototype of this adaptive control system was also produced in this study.

scholarly journals TRAFFIC LIGHT CONTROL USING FUZZY LOGIC MAMDANI METHOD

2019 ◽  
Vol 3 (1) ◽  
pp. 1-10
Author(s):  
Paula Juniana ◽  
Lukman Hakim
Keyword(s):  
Fuzzy Logic ◽  
Control System ◽  
Traffic Congestion ◽  
Green Light ◽  
Light Control ◽  
Traffic Light ◽  
Additional Time ◽  
Traffic Lights ◽  
Traffic Jams ◽  
Traffic Light Control

Traffic congestion is a common occurrence in Indonesia. Traffic congestion is increasing from year to year, causing many things to happen, such as longer travel time, increased transportation costs, serious disruptions to transporting products, decreasing levels of work productivity, and wasteful use of labor energy. Congestion is also caused by a traffic light control system that is made with a fixed time so it can not detect the density of certain paths. Traffic lights in Indonesia, frequent damage that makes the density and the flow of his road vehicles can not be controlled. From these problems, conducted research to reduce the density of vehicles using infrared sensors and see the waiting time of the vehicle when the red light. The traffic light control system will use Fuzzy Logic Mamdani method. In Mamdani method by applying fuzzy into each variable and will be done matching between rule with condition which fulfilled to determine contents of output to be executed by prototype. This congestion detection will help the system in controlling the green light time by looking at stable, medium, and traffic jams. When the bottleneck starts to detect, the prototype will add a green light time according to the condition that is 0 seconds, 5 seconds, 10 seconds, and 15 seconds. However, when the streets are not detected by traffic jams, the green light will be back to normal at 15 seconds without additional time

scholarly journals An Efficient Adaptive Traffic Light Control System for Urban Road Traffic Congestion Reduction in Smart Cities

Information ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 119
Author(s):  
Dex R. ALEKO ◽  
Soufiene Djahel
Keyword(s):  
Control System ◽  
Travel Time ◽  
Traffic Congestion ◽  
Fixed Time ◽  
City Centre ◽  
Light Control ◽  
Traffic Light ◽  
Long Distance ◽  
Traffic Lights ◽  
Traffic Light Control

Traffic lights have been used for decades to control and manage traffic flows crossing road intersections to increase traffic efficiency and road safety. However, relying on fixed time cycles may not be ideal in dealing with the increasing congestion level in cities. Therefore, we propose a new Adaptive Traffic Light Control System (ATLCS) to assist traffic management authorities in efficiently dealing with traffic congestion in cities. The main idea of our ATLCS consists in synchronizing a number of traffic lights controlling consecutive junctions by creating a delay between the times at which each of them switches to green in a given direction. Such a delay is dynamically updated based on the number of vehicles waiting at each junction, thereby allowing vehicles leaving the city centre to travel a long distance without stopping (i.e., minimizing the number of occurrences of the ‘stop and go’ phenomenon), which in turn reduces their travel time as well. The performance evaluation of our ATLCS has shown that the average travel time of vehicles traveling in the synchronized direction has been significantly reduced (by up to 39%) compared to non-synchronized fixed time Traffic Light Control Systems. Moreover, the overall achieved improvement across the simulated road network was 17%.

Developing an effective diagnosis for safety improvement in steelworks

2005 ◽  
Vol 4 (4) ◽  
pp. 229-240
Author(s):  
A.R. Hale ◽  
H.A. v.d. Waterbeemd ◽  
R. Potter ◽  
B.H. Heming ◽  
P.H.J.J. Swuste ◽  
...  
Keyword(s):  
Control System ◽  
Cold Rolling ◽  
Rolling Mill ◽  
Safety Management ◽  
Risk Control ◽  
Cold Rolling Mill ◽  
Rich Picture ◽  
Safety Improvement ◽  
Effective Diagnosis ◽  
Current Risk

The paper describes the methods used for a study of the safety management system and culture of a cold rolling mill in a steel plant. It uses data from diverse sources which can be validated against each other and combined to produce a rich picture of the current risk control system and its shortcomings. The paper also describes the proposed improvements and what the plant chose to implement. This step also throws light on the culture of the plant.

scholarly journals Operational and Safety Management at Intersections: Can the Turbo-Roundabout Be an Effective Alternative to Conventional Solutions?

2021 ◽  
Vol 13 (9) ◽  
pp. 5103
Author(s):  
Vincenzo Gallelli ◽  
Giusi Perri ◽  
Rosolino Vaiana
Keyword(s):  
Traffic Congestion ◽  
Safety Management ◽  
Environmental Benefits ◽  
Assessment Model ◽  
Pollutant Emission ◽  
Emission Rates ◽  
The European Union ◽  
European Union Policy ◽  
Union Policy

The European Union policy strategies on the sustainability of the transport system pursue the goals of maximizing safety and environmental benefits and reducing the severity and frequency of crashes, congestion, and pollutant emission rates. A common issue is the planning of the most effective solution for operational and safety management at intersections. In this study, an egg turbo roundabout is proposed as the alternative solution to a conventional roundabout in Southern Italy which suffers from traffic congestion. A comparative analysis is carried out using microsimulation techniques to investigate the safety effects and operational improvements of converting a traditional priority intersection into standard roundabout or turbo roundabout layout. In particular, the VISSIM software is used to explore the most relevant operational performance measures: queue length, travel times and delays. The lowest values of these measurements are recorded for the simulated turbo roundabout, thus making this scheme more appropriate in terms of operational performances. With regard to safety analysis, the Surrogate Safety Assessment Model (SSAM) is used to collect information on the predicted number of conflicts, the probability, and severity of the potential collisions. The results suggest that, for the specific case study, the safety levels of the standard roundabout and the turbo roundabout are approximately comparable.

Application of Configuration Technology in Traffic Light Control System Based on PLC

2012 ◽  
Vol 151 ◽  
pp. 510-513 ◽  
Author(s):  
Yu Peng Yao ◽  
Ying Shi ◽  
Ji You Fei
Keyword(s):  
Control System ◽  
New Technology ◽  
Computer Control ◽  
Good Condition ◽  
Control Technology ◽  
Light Control ◽  
Traffic Light ◽  
Software Simulation ◽  
Traffic Lights ◽  
Traffic Light Control

Configuration technology is a new technology for monitoring in the current society; it is the result of the development of computer control technology. To traffic light control system, it is to combine the use of configuration technology and procedures related to PLC, and through software simulation and traffic lights light changes, traffic light control system could achieve the monitoring problem, and if the system is in good condition, its application can save a lot of labor powers and materials.

Sign in / Sign up

Export Citation Format

Share Document