scholarly journals Heavy Metal Adsorbent of Carbon from Sago Liquid Biowaste for Sustainable Technology

2021 ◽  
pp. 205-216
Author(s):  
Zainab Ngaini ◽  
Rafeah Wahi ◽  
Hasnain Hussain ◽  
Nurul Qhalila Bahrin ◽  
Nur Hanani Hasana
Keyword(s):  
Heavy Metal ◽  
Sustainable Technology ◽  
Heavy Metal Adsorbent

scholarly journals The application of silica-cellulose material as heavy metal adsorbent on laboratory wastewater

2021 ◽  
Author(s):  
Moch. Royanudin ◽  
Yudhi Utomo ◽  
Surjani Wonorahardjo
Keyword(s):  
Heavy Metal ◽  
Cellulose Material ◽  
Heavy Metal Adsorbent

Review of chitosan composite as a heavy metal adsorbent: Material preparation and properties

2021 ◽  
Vol 259 ◽  
pp. 117613
Author(s):  
Shabbah Begum ◽  
Nor Yuliana Yuhana ◽  
Noorashikin Md Saleh ◽  
Nur Hidayatul Nazirah Kamarudin ◽  
Abu Bakar Sulong
Keyword(s):  
Heavy Metal ◽  
Heavy Metal Adsorbent ◽  
Chitosan Composite ◽  
Material Preparation

scholarly journals Synthesis of Nanobentonite as Heavy Metal Adsorbent with Various Solvents

2018 ◽  
Vol 34 (4) ◽  
pp. 1854-1857
Author(s):  
Makmur Sirait ◽  
Saharman Gea ◽  
Nurdin Bukit ◽  
Nurdin Siregar ◽  
Ceria Sitorus
Keyword(s):  
Heavy Metal ◽  
Diffraction Analysis ◽  
Metal Content ◽  
Energy Analysis ◽  
Nanometer Scale ◽  
X Ray Diffraction ◽  
X Ray ◽  
Atomic Adsorption ◽  
Heavy Metal Adsorbent ◽  
Scanning Electron

The nanobentonite has been synthesized from natural bentonite taken from Tapanuli Utara, Indonesia using coprecipitation method with various solvents (HCl, H2SO4, and HNO3). Its properties as a metal adsorbent were investigated by Atomic Adsorption Spectrophotometry. X-Ray Diffraction analysis revealed that the bentonite produced is in nanometer scale. The characterization results obtained from the SiO2single phase with highest dhkl was at millier index (101) with 2 of 21.9o, 22.0o, 22.07o respectively. The results of Microscope-Scanning Electron Energy analysis of nanobentonite dispersion indicated a reduction in agglomeration and finer nanobentonite surface. The Surface Area Analyzer results showed the SBET nanobentonite for solvent variation of HCL, H2SO4, and HNO3 respectively were 731.76 m2/g, 868.11 m2/g, 493.97 m2/ g. Lastly, Atomic Adsorption Spectrophotometric test showed that the optimal absorption of the metal content possessed by variety of HCl and nanobentonites with adsorption power of 91.16% for Pb, 76.39% for Cu, and 82.74% Co.

scholarly journals Sodium hydroxide modified rice husk for enhanced removal of copper ions

2018 ◽  
Vol 78 (7) ◽  
pp. 1615-1623 ◽  
Author(s):  
N. Priyantha ◽  
H. K. W. Sandamali ◽  
T. P. K. Kulasooriya
Keyword(s):  
Heavy Metal ◽  
Adsorption Capacity ◽  
Rice Husk ◽  
Copper Ions ◽  
Maximum Adsorption Capacity ◽  
Adsorption Model ◽  
Natural Form ◽  
Langmuir Adsorption ◽  
Pseudo Second Order ◽  
Heavy Metal Adsorbent

Abstract Although rice husk (RH) is a readily available, natural, heavy metal adsorbent, adsorption capacity in its natural form is insufficient for certain heavy metal ions. In this context, the study is based on enhancement of the adsorption capacity of RH for Cu(II). NaOH modified rice husk (SRH) shows higher extent of removal for Cu(II) ions than that of heated rice husk (HRH) and HNO3 modified rice husk (NRH). The extent of removal of SRH is increased with the concentration of NaOH, and the optimum NaOH concentration is 0.2 mol dm−3, used to modify rice husk for further studies. The surface area of SRH is 215 m2 g−1, which is twice as much as that of HRH according to previous studies. The sorption of Cu(II) on SRH obeys the Langmuir adsorption model, leading to the maximum adsorption capacity of 1.19 × 104 mg kg−1. Kinetics studies show that the interaction of Cu(II) with SRH obeys pseudo second order kinetics. The X-ray fluorescence spectroscopy confirms the adsorption of Cu(II) on SRH, while desorption studies confirm that Cu(II) adsorbed on SRH does not leach it back to water under normal conditions.

Preparation of Carbonaceous Heavy Metal Adsorbent from Coal Using Sulfur Impregnation

2010 ◽  
Vol 32 (5) ◽  
pp. 442-449 ◽  
Author(s):  
T. Wajima ◽  
K. Murakami ◽  
T. Kato ◽  
K. Sugawara
Keyword(s):  
Heavy Metal ◽  
Heavy Metal Adsorbent

Conversion of Waste Paper Sludge into Heavy Metal Adsorbent Using Sulfur Impregnation

2013 ◽  
Vol 699 ◽  
pp. 759-764 ◽  
Author(s):  
Takaaki Wajima
Keyword(s):  
Heavy Metal ◽  
Room Temperature ◽  
Organic Content ◽  
Paper Sludge ◽  
Recycled Paper ◽  
Manufacturing Plants ◽  
N2 Atmosphere ◽  
Acid Washing ◽  
Inorganic Content ◽  
Heavy Metal Adsorbent

During the manufacture of recycled paper, paper sludge is discharged as an industrial waste. The amount of sludge discharged from manufacturing plants increases annually. In this study, the organic constituents, such as cellulose, in the sludge were converted into carbonaceous heavy metal absorbents using sulfur treatment. Paper sludge was washed with 5 M HCl solution to remove inorganic content, and then immersed in 1 M K2S solution for 24 h. After immersion, the sample was heated at 800 °C for 1 h under N2 atmosphere, and then cooled to room temperature to obtain the product. The sludge was mainly composed of inorganic content, such as calcite, kaolinite and talc, and organic content. Calcite was removed with acid washing and sulfur was impregnated into the sludge by immersing it into the K2S solution. The product with sulfur impregnation indicated higher removal abilities for lead and nickel than those without sulfur impregnation.

Functionalized Porous Clay Heterostructure for Heavy Metal Adsorption from Wastewater

2008 ◽  
Vol 55-57 ◽  
pp. 617-620 ◽  
Author(s):  
R. Tassanapayak ◽  
Rathanawan Magaraphan ◽  
H. Manuspiya
Keyword(s):  
Heavy Metal ◽  
Wastewater Treatment ◽  
Bentonite Clay ◽  
Directed Assembly ◽  
Average Pore ◽  
Surface Areas ◽  
Porous Clay Heterostructure ◽  
Clay Layers ◽  
Heavy Metal Adsorbent ◽  
Adsorption Desorption

A wide variety of toxic metals and organic chemicals are discharged to the environment as industrial or laboratory wastes, causing serious water, air, and soil pollution. One of the interesting materials for using as the adsorbents to adsorb these pollutants in wastewater treatment is porous clay heterostructures (PCHs). These porous materials are obtained by the surfactant-directed assembly of mesostructured silica within clay layers. In the present work, the PCHs were synthesized within the galleries of Na-bentonite clay by the polymerization of tetraethoxysilane (TEOS) in surfactant templates (cetyltrimethylammonium ion and dodecylamine). These PCHs were functionalized with 3-mercaptopropyltrimethoxysilane (MPTMS) to obtain the MP-PCH utilizing as heavy metal adsorbent. According to N2 adsorption-desorption data, the results show that PCH has surface areas of 549.7 m2/g, an average pore diameter in the supermicropore to small mesopore range of 3.16 nm, and a pore volume of 0.45 cc/g, while MP-PCH shows pore parameters of 488.7 m2/g, 3.28 nm, and 0.48 cc/g, respectively. Moreover, the MP-PCH was investigated the adsorption properties which concerned with their function as adsorbents for aqueous solution. The results show that the adsorption capacity of MP-PCH was 0.22, 0.24, 0.50 , 0.48 and 0.11 mmol/g for Cd, Cu, Mn, Ni and Pb, respectively. They point out the potential for utilizing as the heavy metal adsorbents in wastewater treatment.

Pengambilan senyawa polisakarida ekstraseluler dari mikroorganisme dalam lumpur aktif sebagai adsorben logam berat

2018 ◽  
Vol 5 (2) ◽  
pp. 453
Author(s):  
H Haryono ◽  
Tjandra Setiadi
Keyword(s):  
Heavy Metal ◽  
Activated Sludge ◽  
Extraction Method ◽  
Extracellular Polymeric Substances ◽  
Research Result ◽  
Freundlich Isotherm ◽  
Extraction Methods ◽  
Average Maximum ◽  
Heavy Metal Adsorbent ◽  
Main Component

Extracellular polysaccaride extraction from activated sludge microorganism as heavy-metal adsorbent. Microorganisms in the form of bioagregate are the main component of activated sludge. It generally has an ability to produce EPS (extracellular polymeric substances). The important components in EPS are polysaccharides and proteins. EPS recovery from the activated sludge may be done by many extraction methods. Six of the extraction methods to extract EPS from the activated sludge have been studied in this research, such are: Middle Speed Centrifugation, Regular Centrifugation, NaOH Extraction, EDTA Extraction, Steaming Extraction and Sonication. EPS solution in the following step would be tested its performances as adsorbent of copper heavy metal. The research result shows that the best extraction method for EPS extraction was NaOH Extraction method. The amount of the polysaccharides obtained was 18,09 mg EPS/g TSS. On other hand, Steaming Extraction was the most ineffective extraction method. This method gives the polysaccharides result in the least amount, i.e., about 4,96 mg EPS/g TSS. In this research, the protein content was not detected in the all used EPS solution. In the adsorption test, the adsorption phenomena of copper metal with EPS adsorbent fitted to the Freundlich isotherm adsorption equation. The values of Freundlich's a constant (k and n) each were 2,282 and 0,963. The average maximum adsmption capaciry of EPS to metal Cu was 88,34 mg Cu/gEPS.Keywords:  Adsorption,  Heavy  Metal,  Activated  Sludge,  Extraction Methods, Polysaccharides Extracellular, Copper.AbstrakMikroorganisme dalam bentuk bioagregat adalah merupakan penyusun utama lumpur aktif, memiliki sifat  umum  yaitu  dalam  kemampuannya memproduksi  SPE (Senyawa  Polimer  Ekstraselluler). Komponen  utama dari SPE adalah polisakarida  dan protein. Pengambilan SPE dari bioagregat dapat dilakukan dengan banyak metode ekstraksi.Pada penelitian ini telah dipelajari karakteristik enam  metode  ekstraksi, yaitu: Sentrifugasi Kecepatan Sedang, Sentrifugasi Reguler, Ekstraksi dengan NaOH. Ekstraksi dengan EDTA, Ekstraksi dengan Pemanasan dan Sonikasi. Larutan SPE yang diperoleh, kemudian diuji kinerjanya sebagai adsorben logam berat tembaga. Hasil penelitian menunjukkan bahwa  metode ekstraksi terbaik adalah metode Ekstraksi dengan NaOH, dengan perolehan polisakarida sebesar 18,09 mg/g TSS. Sedangkan Ekstraksi dengan pemanasan merupakan metode ekstraksi yang paling tidak efektif dengan perolehan polisakarida paling sedikit, yaitu sekitar 4,96 mg/g TSS. Pada penelitian ini tidak dijumpai adanya protein di dalam larutan SPE dari semua  metode ekstraksi yang diterapkan. Pada uji adsorpsi, peristiwa adsorpsi logam  Cu dengan larutan SPE lebih mengikuti persamaan adsorpsi isoterm Freundlich dengan harga konstanta k dan n masing-masing sebesar 2,282 dan 0,963. Kapasitas adsorpsi maksimum rata-rata SPE terhadap logam Cu adalah sebesar 88,34 mg Cu/g SPE.Kata kunci:  Adsorpsi, Logam Berat, Lumpur Aktif, Metode Ekstraksi, Polisakarida Ekstraselluler, Tembaga.

Simple iron-based sludge processing for low-cost, efficient heavy metal adsorbent (the case study)

2020 ◽  
Vol 194 ◽  
pp. 133-142
Author(s):  
Michal Hegedüs ◽  
Alexandra Bekényiová ◽  
Katarína Harčárová ◽  
Petr Lacin ◽  
Zuzana Danková ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Low Cost ◽  
Iron Based ◽  
Cost Efficient ◽  
Heavy Metal Adsorbent
Sign in / Sign up

Export Citation Format

Share Document