In this paper, the basic composition and performance evaluation of the recycled asphalt pavement (RAP) materials were firstly analyzed, and two methods were proposed to evaluate strength characteristics of RAP materials, including a triaxial method for the residual strength and the mortar cementing method for the strength of RAP lump. Then, the cold recycling technology was applied on RAP materials with emulsified asphalt by using vibratory compaction and heavy-duty compaction methods (Proctor compaction method), and the results showed that the maximum dry density obtained by heavy-duty compaction was closer to the actual situation. Finally, the effects of wetting water, emulsified asphalt dosage and curing conditions on the performance of the specimens were investigated. It was found that when the emulsified asphalt was mixed uniformly, whether or not to add the wetting water have almost no effect on the strength of the molded specimens. When the matrix asphalt content of the emulsified asphalt was 30%~60%, the water could be directly added to the cold recycling mixture. The intensity of accelerated curing for two days at 40 °C was approximately equal to that of natural curing for three days, while that of accelerated curing for three days at 40 °C was approximately equal to that of natural curing for seven days, which provided a basis for the short-term laboratory test.
Performance Evaluation for Rutting and Moisture damage of Hot Asphalt Mixtures using High Percentage of Recycled Asphalt Pavement Material
