Certified reference materials (CRM's) for the quality of measurement

1990 ◽  
Vol 337 (7) ◽  
pp. 812-816 ◽  
Author(s):  
B. Griepink
Keyword(s):  
Reference Materials ◽  
Certified Reference Materials

scholarly journals The problem of improving the quality of seriously issued certified reference materials of the composition of gas mixtures

2019 ◽  
Vol 15 (3) ◽  
pp. 5-13
Author(s):  
L. A. Konopelko ◽  
A. V. Kolobova ◽  
O. V. Fatina
Keyword(s):  
Reference Material ◽  
Reference Materials ◽  
Certified Reference Materials ◽  
Metrological Traceability ◽  
Gas Mixtures ◽  
Measuring Instruments ◽  
Expanded Uncertainty ◽  
Iso Guide 35 ◽  
The Russian Federation

Currently, in the Russian Federation, the metrological traceability of certified reference materials of the composition of gas mixtures in cylinders under pressure produced by manufacturers of certified reference materials is carried out in accordance with GOST 8.578-2014. Considering that certified reference materials of the composition of gas mixtures in cylinders under pressure are used for testing to approye the type of measuring instruments, verification, calibration, and graduation of gas-analytical measuring instruments used to control explosive gases and vapors, harmful components in the atmospheric air and the air of the working area, emissions from vehicles and enterprises, to control technological processes, the quality of hydrocarbon products, etc., the issue of ensuring the quality of seriously produced certified reference materials (about 100.000 cylinders with gas mixtures per year) is important. To ensure the quality of certified reference materials of gas mixtures in cylinders under pressure, mass-produced by manufacturers of certified reference materials, we offer the following actions:– manufacturers of certified reference materials’ passing of mandatory accreditation for compliance with the requirements of GOST ISO Guide 34–2014 and GOST ISO Guide 35–2015;– manufacturers of certified reference materials’ constant participation in the proficiency testing programs through interlaboratory tests;– actualizing and refining the existing set of standards defining the requirements for the entire life cycle of a certified reference material of a gas mixture in a cylinder under pressure;– improving the method of certification of a reference material by calculating the value of the expanded uncertainty of the reference material and the introducting a new coefficient «technological reserve».

Development, validation, and certification by isotope dilution gas chromatography-mass spectrometry of lyophilized human serum reference materials for cortisol (CRM 192 and 193) and progesterone (CRM 347 and 348)

1991 ◽  
Vol 37 (4) ◽  
pp. 540-546 ◽  
Author(s):  
Linda Thienpont ◽  
Lothar Siekmann ◽  
Alexander Lawson ◽  
Elisabeth Colinet ◽  
Andrȳ De Leenheer
Keyword(s):  
Mass Spectrometry ◽  
Gas Chromatography ◽  
Reference Materials ◽  
Isotope Dilution ◽  
Certified Reference Materials ◽  
Collaborative Study ◽  
Gas Chromatography Mass Spectrometry ◽  
Chromatography Mass Spectrometry ◽  
Coefficients Of Variation

Abstract The Community Bureau of Reference of the European Communities has produced four batches of lyophilized serum Certified Reference Materials, two for cortisol (CRM 192 and 193) and two for progesterone (CRM 347 and 348). For cortisol, one of the pools consisted of serum from healthy blood donors, whereas the second batch was supplemented with pure cortisol. The progesterone Reference Materials contained only endogenous hormone concentrations. Assessment of vial-to-vial variability in the cortisol and progesterone concentrations showed no between-sample inhomogeneity, and the materials were stable. The quality of the materials was therefore considered sufficient for certification of the values for the cortisol and progesterone concentrations by a collaborative study involving several laboratories from the European Communities, using isotope dilution gas chromatography-mass spectrometry. Inaccuracy in reconstitution of the lyophilized materials was less than 0.3%; imprecision of sampling was less than 0.2%. For determinations of cortisol and progesterone concentrations, the mean within-laboratory coefficients of variation (CVs) were 1.76% (CRM 192), 1.19% (CRM 193), 1.64% (CRM 347), and 1.75% (CRM 348). The between-laboratory CVs were greater: CRM 192, 1.79%; CRM 193, 1.48%; CRM 347, 2.08%; and CRM 348, 2.16%. The concentrations in the reconstituted Reference Materials were certified to be 273 nmol/L in CRM 192 and 763 nmol/L in CRM 193 for cortisol and 10.13 nmol/L in CRM 347 and 40.3 nmol/L in CRM 348 for progesterone. Uncertainties at the 0.95 confidence level--6 (CRM 192), 14 (CRM 193), 0.21 (CRM 347), and 1.0 nmol/L (CRM 348)--were considered compatible with the intended use of the materials.

scholarly journals Quality Assurance of Analytical Measurements—A Vital Element in Safety Performance in the Nuclear Field

Proceedings ◽  
2020 ◽  
Vol 55 (1) ◽  
pp. 2
Author(s):  
Elena Neacsu
Keyword(s):  
Quality Assurance ◽  
Reference Materials ◽  
Certified Reference Materials ◽  
Analytical Data ◽  
Physical Principle ◽  
Energy Agency ◽  
Nuclear Domain ◽  
Analyte Detection ◽  
Harmful Effects

The (International Atomic Energy Agency) IAEA’s fundamental safety objective is to protect people and the environment from harmful effects of ionizing radiation. The safety principles apply to all facilities and all activities to reduce existing radiation risks. Analytical quality assurance has gained in importance in many scientific areas, including the analysis of radioactive specimens that require a thorough investigation and regulations for safety and ecological reasons. The use of certified reference materials is an essential pillar for the assessment of the quality of analytical data. Still, such matrix-matched certified reference materials are unfortunately not available for most investigations relevant to the nuclear domain. Therefore, other strategies have to be established, i.e., to compare the analytical results obtained for a particular instrumental technique, with data from another methodology whose analyte detection is based on a different physical principle.

scholarly journals KARAKTERISTISASI DAN UJI HOMOGENITAS KANDIDAT BAHAN ACUAN BUFER FTALAT DAN BUFER FOSFAT UNTUK PENGUKURAN DERAJAT KEASAMAN

2013 ◽  
Vol 15 (1) ◽  
pp. 9-14 ◽  
Author(s):  
Sujarwo Sujarwo ◽  
Nuryatini Nuryatini
Keyword(s):  
Everyday Life ◽  
Reference Materials ◽  
Confidence Level ◽  
Certified Reference Materials ◽  
Ph Measurement ◽  
Metrology In Chemistry ◽  
Food And Beverage ◽  
Materials Research ◽  
And Performance

Measurement of pH is closely related to everyday life,such as in the area of environment, food and beverage,pharmaceuticals, and even metabolism process in humanbody. To ensure the quality of pH measurement, pH metershould be calibrated regularly and checked each time beforeused. Calibration and performance checking of pH meterrequires traceable standard. The standard should be linked toCRM (Certified Reference Materials). Research Center forChemistry - Indonesian Institute of Sciencesas the technicallaboratory in Indonesia for metrology in chemistry isconducting research in developing reference materials for pHmeasurement. The reference materials are phthalate andphosphate buffer withthe value of pH were 4.00±O.OJ and6.86±O. OJ, respectively at 95% confidence level (k=2).Homogenity study was evaluated based on F-test and theresults indicated that both reference materials candidate werehomogeneous.Keywords: Reference materials, CRM,phthalate buffer,phosphatebuffer,uncertainty,homogeneity.

Development of reference materials with the composition of propyl and isopropyl alcohol solutions

2020 ◽  
pp. 66-72
Author(s):  
Irina A. Piterskikh ◽  
Svetlana V. Vikhrova ◽  
Nina G. Kovaleva ◽  
Tatyana O. Barynskaya
Keyword(s):  
Reference Materials ◽  
Measurement Errors ◽  
Isopropyl Alcohol ◽  
Certified Reference Materials ◽  
Toxic Substances ◽  
Biological Objects ◽  
Margin Of Error ◽  
Measurement Results ◽  
And Control ◽  
Characteristic Mass

Certified reference materials (CRM) composed of propyl (11383-2019) and isopropyl (11384-2019) alcohols solutions were created for validation of measurement procedures and control of measurement errors of measurement results of mass concentrations of toxic substances (alcohol) in biological objects (urine, blood) and water. Two ways of establishing the value of the certified characteristic – mass consentration of propanol-1 or propanol-2 have been studied. The results obtained by the preparation procedure and comparison with the standard are the same within the margin of error.

Sign in / Sign up

Export Citation Format

Share Document