Towards Multi-Analyte Detection with Field-Effect Capacitors Modified with Tobacco Mosaic Virus Bioparticles as Enzyme Nanocarriers

Utilizing an appropriate enzyme immobilization strategy is crucial for designing enzyme-based biosensors. Plant virus-like particles represent ideal nanoscaffolds for an extremely dense and precise immobilization of enzymes, due to their regular shape, high surface-to-volume ratio and high density of surface binding sites. In the present work, tobacco mosaic virus (TMV) particles were applied for the co-immobilization of penicillinase and urease onto the gate surface of a field-effect electrolyte-insulator-semiconductor capacitor (EISCAP) with a p-Si-SiO2-Ta2O5 layer structure for the sequential detection of penicillin and urea. The TMV-assisted bi-enzyme EISCAP biosensor exhibited a high urea and penicillin sensitivity of 54 and 85 mV/dec, respectively, in the concentration range of 0.1–3 mM. For comparison, the characteristics of single-enzyme EISCAP biosensors modified with TMV particles immobilized with either penicillinase or urease were also investigated. The surface morphology of the TMV-modified Ta2O5-gate was analyzed by scanning electron microscopy. Additionally, the bi-enzyme EISCAP was applied to mimic an XOR (Exclusive OR) enzyme logic gate.

Diamond-Based Electrodes for Detection of Metal Ions and Anions

Diamond electrodes have long been a well-known candidate in electrochemical analyte detection. Nano- and micro-level modifications on the diamond electrodes can lead to diverse analytical applications. Doping of crystalline diamond allows the fabrication of suitable electrodes towards specific analyte monitoring. In particular, boron-doped diamond (BDD) electrodes have been reported for metal ions, anions, biomolecules, drugs, beverage hazards, pesticides, organic molecules, dyes, growth stimulant, etc., with exceptional performance in discriminations. Therefore, numerous reviews on the diamond electrode-based sensory utilities towards the specified analyte quantifications were published by many researchers. However, reviews on the nanodiamond-based electrodes for metal ions and anions are still not readily available nowadays. To advance the development of diamond electrodes towards the detection of diverse metal ions and anions, it is essential to provide clear and focused information on the diamond electrode synthesis, structure, and electrical properties. This review provides indispensable information on the diamond-based electrodes towards the determination of metal ions and anions.

A Fluorescence Kinetic-Based Aptasensor Employing Stilbene Isomerization for Detection of Thrombin

It is important to detect thrombin due to its physiological and pathological roles, where rapid and simple analytical approaches are needed. In this study, an aptasensor based on fluorescence attenuation kinetics for the detection of thrombin is presented, which incorporates the features of stilbene and aptamer. We designed and synthesized an aptasensor by one-step coupling of stilbene compound and aptamer, which employed the adaptive binding of the aptamer with thrombin to cause a change in stilbene fluorescence attenuation kinetics. The sensor realized detection of thrombin by monitoring the variation in apparent fluorescence attenuation rate constant (kapp), which could be further used for probing of enzyme–aptamer binding. In comprehensive studies, the developed aptasensor presented satisfactory performance on repeatability, specificity, and regeneration capacity, which realized rapid sensing (10 s) with a limit of detection (LOD) of 0.205 μM. The strategy was successful across seven variants of thrombin aptasensors, with tunable kapp depending on the SITS (4-Acetamido-4′-isothiocyanato-2,2′-stilbenedisulfonic acid disodium salt hydrate) grafting site. Analyte detection mode was demonstrated in diluted serum, requiring no separation or washing steps. The new sensing mode for thrombin detection paves a way for high-throughput kinetic-based sensors for exploiting aptamers targeted at clinically relevant proteins.

Translatory and rotatory motion of exchange-bias capped Janus particles controlled by dynamic magnetic field landscapes

Magnetic Janus particles (MJPs), fabricated by covering a non-magnetic spherical particle with a hemispherical magnetic in-plane exchange-bias layer system cap, display an onion magnetization state for comparably large diameters of a few microns. In this work, the motion characteristics of these MJPs will be investigated when they are steered by a magnetic field landscape over prototypical parallel-stripe domains, dynamically varied by superposed external magnetic field pulse sequences, in an aqueous medium. We demonstrate, that due to the engineered magnetization state in the hemispherical cap, a comparably fast, directed particle transport and particle rotation can be induced. Additionally, by modifying the frequency of the applied pulse sequence and the strengths of the individual field components, we observe a possible separation between a combined or an individual occurrence of these two types of motion. Our findings bear importance for lab-on-a-chip systems, where particle immobilization on a surface via analyte bridges shall be used for low concentration analyte detection and a particle rotation over a defined position of a substrate may dramatically increase the immobilization (and therefore analyte detection) probability.

A Comprehensive Review on Thiophene Based Chemosensors

The recognition and sensing of various analytes in aqueous and biological systems by using fluorometric or colorimetric chemosensors possessing high selectivity and sensitivity, low cost has gained enormous attention. Furthermore, thiophene derivatives possess exceptional photophysical properties compared to other heterocycles, and therefore they can be employed in chemosensors for analyte detection. In this review, we have tried to explore the design and detection mechanism of various thiophene-based probes, practical applicability, and their advanced models (design guides), which could be thoughtful for the synthesis of new thiophene-based probes. This review provides an insight into the reported chemosensors (2008-2020) for thiophene scaffold as effective emission and absorption-based chemosensors.

Sensitivity Enhancement of a Graphene, Zinc Sulfide-based Surface Plasmon Resonance Biosensor With an Ag Metal Configuration in the Visible Region

A biosensor based on the modified Kretschmann configuration is proposed here. The sensitivity of the conventional prism-based sensor using angular interrogation is low. To enhance the sensor's performance, layers of zinc sulfide (ZnS) and graphene have been deposited over the metal layer. The angular interrogation technique is used to analyze the performance of the sensor. The thickness of the Ag metal has been optimized. The thickness of the Ag metal is taken as 50 nm because minimum reflectance has been achieved. With the combinations of the four layers of ZnS and one graphene layer, the maximum sensitivity attained is 305o/RU. Performance parameters such as detection accuracy, FWHM, and quality factor of the sensor have been evaluated as obtained as 0.33 deg-1, 3.05 deg, 100.7 RIU-1, respectively. The proposed sensor has potential application in the field of biochemical and biological analyte detection.

Capture the Tag: Mitigation of Biotin Interference in ELISA and Automated Immunoassays by Pre-Conjugating Biotinylated Antibodies to the Streptavidin Surface

Introduction Streptavidin to biotin binding is one of the strongest non-covalent interactions in nature, and is therefore, successfully incorporated into many immunoassays to facilitate antibody capture. Biotin-streptavidin coupling assays are susceptible to interference from free biotin in patient specimens, which may falsely decrease or increase the result depending on assay format. Currently, biotin-stripping methods capture free biotin in patient specimens by pre-incubation with streptavidin-coated microparticles. However, this approach increases turnaround time, test cost, and testing steps, which increases the chance of error. Our objective was to determine if pre-conjugating biotinylated antibodies to the assay’s streptavidin solid surface before adding patient specimen could mitigate biotin interference in ELISA and automated sandwich immunoassays. Methods We performed this study on 3 different ELISAs (CYFRA-21, NSE, S100B) and one automated assay (thyroglobulin); all are a sandwich immunoassay format. Serum pools were spiked with biotin (25 - 1000 µg/L) or PBS control. Manufacturer protocols were followed in both the ELISAs and automated assay to evaluate baseline concentration-dependent biotin interference. Mitigation of biotin interference by pre-incubation was then evaluated in the ELISAs by adding biotinylated antibody to the streptavidin-coated wells 0, 10, 15, or 60 min before adding biotin- or PBS-spiked serum specimens. For the automated assay, streptavidin-coated beads and biotinylated antibody were removed from the reagent cartridge, mixed, and incubated 4.5 hours. The mixture containing biotin-tagged antibody bound to streptavidin beads was added back to the cartridge and placed on the analyzer to evaluate spiked specimens. Lastly, we compared the pre-incubation method to a standard biotin-stripping protocol in the ELISAs to compare the effectiveness of mitigating biotin interference. Results We observed biotin interference across the three ELISAs, where 400 µg/L biotin spiked in serum pools reduced analyte detection to between 10 – 15% of the total activity using the standard assay format. Our time-course studies showed 84 – 95% recovery of the total activity when the biotinylated antibody was pre-incubated in the streptavidin-coated wells for 1 hour prior to addition of serum specimens, compared to 69 – 99% by a standard biotin stripping protocol. We extended this concept to the automated immunoassay where at 1000 µg/L biotin in the specimen, only 9 ±0.01% of the total analyte was measured by the conventional method. However, pre-mixing biotinylated antibody and streptavidin beads resulted in 97 ±0.01% of the total analyte recovery in the presence of 1000 µg/L biotin. Conclusion We have demonstrated that pre-conjugating the biotin antibody to streptavidin is as effective as biotin-stripping methods to avoid biotin interference in sandwich immunoassays that utilize the biotin-streptavidin system, with the additional benefit of optimizing turnaround times, cost, and labor. A simple change in manufacturer assay design could make immunoassays more robust against biotin interference in patient samples.

Protocell arrays for simultaneous detection of diverse analytes

Simultaneous detection of multiple analytes from a single sample (multiplexing), particularly when done at the point of need, can guide complex decision-making without increasing the required sample volume or cost per test. Despite recent advances, multiplexed analyte sensing still typically faces the critical limitation of measuring only one type of molecule (e.g., small molecules or nucleic acids) per assay platform. Here, we address this bottleneck with a customizable platform that integrates cell-free expression (CFE) with a polymer-based aqueous two-phase system (ATPS), producing membrane-less protocells containing transcription and translation machinery used for detection. We show that multiple protocells, each performing a distinct sensing reaction, can be arrayed in the same microwell to detect chemically diverse targets from the same sample. Furthermore, these protocell arrays are compatible with human biofluids, maintain function after lyophilization and rehydration, and can produce visually interpretable readouts, illustrating this platform’s potential as a minimal-equipment, field-deployable, multi-analyte detection tool.

The use of nanobodies in a sensitive ELISA test for SARS-CoV-2 Spike 1 protein

Detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antigens in the fluid has important uses in biotechnology, and is integral to many point-of-care SARS-CoV-2 diagnostics. Sandwich enzyme-linked immunosorbent assays (ELISAs) are a sensitive, well-established method of measuring antigens in solutions. They use one ligand to capture and the other ligand to detect the target analyte. Detection is commonly achieved using colorimetric readout obtained upon the reaction of a substrate with HRP-conjugated secondary ligand. Nanobodies, the V H H domain of camelid antibodies, have expanded the repertoire of molecules used in antigen detection. Nanobodies' high affinity for target antigens, their compact structure, their high stability and ease of production has driven research into their use as diagnostic reagents. Guided by a structural understanding of epitopes on the receptor-binding domain of the SARS-CoV-2 Spike protein, we investigated various combinations of engineered nanobodies in a sandwich ELISA to detect the Spike protein of SARS-CoV-2. We have identified an optimal combination of nanobodies. These were selectively functionalized to further improve antigen capture, enabling the measurement of sub-picomolar amounts of SARS-CoV-2 Spike protein in solution. With this combination, the routine detection limit in samples inactivated by heat and detergent corresponded to less than seven focus-forming units of infectious SARS-CoV-2.