ABSTRACTPolycrystalline silicon thin films have been deposited at fast growth rates (50 Å/s) by hotwire chemical vapour deposition (HW-CVD) from SiH4/H2 gas mixtures at low substrate temperature (400–500°C). The surface morphology of these films consists of 0.5 – 2.0μm dendritic grains as seen by electron microscopy. The films have a columnar morphology with grains starting from the substrate either on glass or c-Si. Even the 150 nm thick initial layer is polycrystalline. The preferential crystalline orientation of the poly-Si film is apparently not governed by the radiative source but strongly depends on the type and orientation of the substrate. A strong hydrogen dilution (>90%) of silane is essential to obtain poly-Si films with optimal crystalline structure.
Polycrystalline silicon films obtained by hot-wire chemical vapour deposition