Relationship of the structure to the mechanical properties of 13KhG2B steel after controlled rolling

1984 ◽  
Vol 26 (11) ◽  
pp. 826-828
Author(s):  
L. V. Popova ◽  
A. G. Nasibov ◽  
N. I. Karchevskaya
2015 ◽  
Vol 1120-1121 ◽  
pp. 1109-1114
Author(s):  
Xin Lei ◽  
Hui Huang ◽  
S.P. Wen

This study investigated the mechanical properties and microstructures of Er-containing Al–Mg alloys. The research found that the H114-T sheet of Er-containing Al–Mg alloys showed a relative good comprehensive performance in mechanical properties. With the special rolling and heat treatment process, this H114-T sheet showed different morphology of microstructures with the other sheets in Er-containing Al–Mg alloys. Grains in H114-T sheet performed irregular shape polygon, a number of subgrains appeared in grains, the amount of dislocations in grains decreased. H114-T sheet possessed a lot of Copper texture, this may be one of important factors influenced the mechanical properties.


Metallurgist ◽  
2012 ◽  
Vol 56 (1-2) ◽  
pp. 52-58
Author(s):  
I. F. Pemov ◽  
Yu. D. Morozov ◽  
E. A. Goli-Oglu ◽  
A. D. Lyuchkov ◽  
I. Z. Mashinson ◽  
...  

1986 ◽  
Vol 28 (4) ◽  
pp. 248-251
Author(s):  
V. M. Farber ◽  
V. N. Davydov ◽  
V. V. Machikhin ◽  
V. F. Evdokimov ◽  
E. G. Zudov

2019 ◽  
Vol 8 (1) ◽  
pp. 1353-1365 ◽  
Author(s):  
Mohammad Masoumi ◽  
Edwan Anderson Ariza Echeverri ◽  
Cleiton Carvalho Silva ◽  
Willys Machado Aguiar ◽  
Hamilton Ferreira Gomes de Abreu

2013 ◽  
Vol 347-350 ◽  
pp. 1132-1138 ◽  
Author(s):  
Hai Dong Wang ◽  
Xu Liu ◽  
Gui Xue Bian ◽  
Li Xu ◽  
Shi Zhao

Elastic constants of purity and containing impurity metal aluminum were calculated, and the effects of impurity on the elastic constants were also studied. The effect of particle on micro-stress concentration and debonded stress of inclusion was researched. The mechanical relationship between the grains was defined by relationship of displacement and driving force in cohesion zone model (CZM).The method can be extended to research mechanical properties of other metals and alloys structures.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Min Guo ◽  
Jianli Liu ◽  
Bo Zhu ◽  
Weidong Gao

AbstractThe fatigue behavior of cotton warps was studied by a newly weaving load simulator (WLS) developed in our laboratory. Reborn hairiness, strength retention, and elongation retention of sized warps were adopted to evaluate the physical and mechanical properties of sized warps under stretch-abrasion cyclic loading. The influences of different fatigue cycles on the above three indicators were also discussed. The results indicated that the fatigue behavior of the cotton warps accompanied by abrasion yields a three-parameter Weibull distribution. All the fitting plots show acceptable linearity. Moreover, there is a strong relationship of quadratic polynomial between the tensile properties and the fatigue cycle of the sized warps according to the scatter fitting (R2 > 91.08%). Similarly, there is also a good relationship of quadratic polynomial between the reborn hairiness index and the fatigue cycle of the sized warps (R2 > 94.51%). Finally, regardless of the strength retention, elongation retention, and reborn hairiness, the physical and mechanical properties of the cotton warps still change with the continuous increase of the fatigue cycle after 40% of the fatigue cycle, but it is not significant. The research was helpful to estimate the capacity of the warps to sustain failure.


1999 ◽  
Vol 147 (1) ◽  
pp. 37-61 ◽  
Author(s):  
E. Baer ◽  
A. Hiltner ◽  
D. Jarus

2005 ◽  
Vol 98 (4) ◽  
pp. 1434-1441 ◽  
Author(s):  
Lauren D. Black ◽  
Kelly K. Brewer ◽  
Shirley M. Morris ◽  
Barbara M. Schreiber ◽  
Paul Toselli ◽  
...  

Pulmonary emphysema and vessel wall aneurysms are diseases characterized by elastolytic damage to elastin fibers that leads to mechanical failure. To model this, neonatal rat aortic smooth muscle cells were cultured, accumulating an extracellular matrix rich in elastin, and mechanical measurements were made before and during enzymatic digestion of elastin. Specifically, the cells in the cultures were killed with sodium azide, the cultures were lifted from the flask, cut into small strips, and fixed to a computer-controlled lever arm and a force transducer. The strips were subjected to a broadband displacement signal to study the dynamic mechanical properties of the samples. Also, quasi-static stress-strain curves were measured. The dynamic data were fit to a linear viscoelastic model to estimate the tissues' loss (G) and storage (H) modulus coefficients, which were evaluated before and during 30 min of elastase treatment, at which point a failure test was performed. G and H decreased significantly to 30% of their baseline values after 30 min. The failure stress of control samples was ∼15 times higher than that of the digested samples. Understanding the structure-function relationship of elastin networks and the effects of elastolytic injury on their mechanical properties can lead to the elucidation of the mechanism of elastin fiber failure and evaluation of possible treatments to enhance repair in diseases involving elastolytic injury.


2010 ◽  
Vol 123-125 ◽  
pp. 371-374
Author(s):  
Siddaramaiah ◽  
Manjula Koregala Sidde Gowda ◽  
Joong Hee Lee

Polyurethane (PU)/starch biocomposites have been prepared with different weight fractions of starch (viz., from 0 to 40 wt %). The fabricated PU/starch composites were characterized by mechanical properties and thermal (DSC and TGA) behaviors. Microcrystalline parameters were calculated using X-ray profile. Water uptake and its effect on mechanical properties have been evaluated.


Sign in / Sign up

Export Citation Format

Share Document