Thermoelectric stability of thermocouples made of high-melting metals or their alloys

1965 ◽  
Vol 8 (9) ◽  
pp. 816-817
Author(s):  
G. B. Lapp ◽  
D. I. Popova
Keyword(s):  
High Melting ◽  
Thermoelectric Stability

A Tem Study of Slip Systems in MoSi2/WSi2 Alloys

1991 ◽  
Vol 49 ◽  
pp. 942-943
Author(s):  
Stuart A. Maloy
Keyword(s):  
Solid Solution ◽  
Solid Solution Hardening ◽  
Slip Systems ◽  
High Melting ◽  
Group 14 ◽  
Solution Hardening ◽  
Brittle To Ductile Transition ◽  
High Melting Temperature ◽  
Tetragonal Unit Cell ◽  
Structural Applications

MoSi2 has recently been investigated as a potential material for high temperature structural applications. It has excellent oxidation resistance up to 1700°C, a high melting temperature, 2030°C, and a brittle-to-ductile transition temperature at 900-1000°C. WSi2 is isomorphous with MoSi2 and has a body-centered tetragonal unit cell of the space group 14/mmm. The lattice parameters are a=3.20 Å and c=7.84 Å for MoSi2 and a=3.21 Å and c=7.88 Å for WSi2. Therefore, WSi2 was added to MoSi2 to improve its strength via solid solution hardening. The purpose of this study was to investigate the slip systems in polycrystalline MoSi2/WSi2 alloys.

Intensification of the process of obtaining basic bases as the basic components of low-curing lubricants

2020 ◽  
Vol 06 ◽  
pp. 48-50
Author(s):  
S.f. Antonov ◽  
◽  
E.F. Kutsevich ◽  
A.I. Matveeva ◽  
R.V. Bartko ◽  
...  
Keyword(s):  
Filtration Rate ◽  
Oil Content ◽  
Economic Indicators ◽  
High Melting ◽  
Polymer Additive ◽  
Modifying Additives ◽  
Base Oils ◽  
Technical And Economic Indicators ◽  
Dewaxing Process

Variants of the intensification of the solvent dewaxing process, which increase the yield of base oils, are described. One of the promising ways to improve the technical and economic indicators of the dewaxing process is the use of modifying additives. The work shows that the introduction of a polymer additive requires a decrease in the filtration rate and, accordingly, an increase in the performance of the dewaxing unit. This results in a petrolatum with a reduced oil content, which is a qualifying factor for the production of high-melting ceresins, protective-wax components, and lubricants for various purposes.

CRM MOLYBDENUM-50 RHENIUM

Alloy Digest ◽  
1970 ◽  
Vol 19 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Powder Metallurgy ◽  
Melting Point ◽  
Physical Properties ◽  
Heat Treating ◽  
Electrical Contacts ◽  
High Melting ◽  
High Melting Point ◽  
Temperature Performance

Abstract CRM MOLYBDENUM-50 RHENIUM is a high-melting-point alloy for applications such as electronics tube components, electrical contacts, thermionic converters, thermocouples, heating elements and rocket thrusters. All products are produced by powder metallurgy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mo-11. Producer or source: Chase Brass & Copper Company Inc..

CRM RHENIUM

Alloy Digest ◽  
1970 ◽  
Vol 19 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Powder Metallurgy ◽  
Melting Point ◽  
Heat Treating ◽  
Electrical Contacts ◽  
High Melting ◽  
High Melting Point ◽  
Temperature Performance ◽  
Commercially Pure

Abstract CRM RHENIUM is a commercially pure, high-melting-point metal for applications such as electronics tube components, electrical contacts, thermionic converters, thermocouples, heating elements and rocket thrusters. All products are produced by powder metallurgy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Re-1. Producer or source: Chase Brass & Copper Company Inc..

PLATINUM

Alloy Digest ◽  
1970 ◽  
Vol 19 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Industrial Applications ◽  
High Melting ◽  
High Melting Point ◽  
White Metal ◽  
Temperature Performance ◽  
Wide Range ◽  
Corrosion And Oxidation

Abstract PLATINUM is a soft, ductile, white metal which can be readily worked either hot or cold. It has a wide range of industrial applications because of its excellent corrosion and oxidation resistance and its high melting point. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Pt-1. Producer or source: Matthey Bishop Inc..

WIELAND DURO TUNGSTEN

Alloy Digest ◽  
2020 ◽  
Vol 69 (10) ◽  
Keyword(s):  
Melting Point ◽  
Physical Properties ◽  
Tensile Properties ◽  
Modulus Of Elasticity ◽  
Radiation Shielding ◽  
High Melting ◽  
High Modulus ◽  
High Melting Point ◽  
Structural Applications ◽  
Very High

Abstract Wieland Duro Tungsten is unalloyed tungsten produced from pressed-and-sintered billets. The high melting point of tungsten makes it an obvious choice for structural applications exposed to very high temperatures. Tungsten is used at lower temperatures for applications that can benefit from its high density, high modulus of elasticity, or radiation shielding capability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on machining. Filing Code: W-34. Producer or source: Wieland Duro GmbH.

scholarly journals Enhanced Performance and Diffusion Robustness of Phase-Change Metasurfaces via a Hybrid Dielectric/Plasmonic Approach

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 525
Author(s):  
Joe Shields ◽  
Carlota Ruiz de Galarreta ◽  
Jacopo Bertolotti ◽  
C. David Wright
Keyword(s):  
Melting Point ◽  
Phase Change ◽  
Noble Metals ◽  
Phase Change Materials ◽  
High Efficiency ◽  
The Body ◽  
Design Stage ◽  
High Melting ◽  
Optical Performance ◽  
Electrical Conductors

Materials of which the refractive indices can be thermally tuned or switched, such as in chalcogenide phase-change alloys, offer a promising path towards the development of active optical metasurfaces for the control of the amplitude, phase, and polarization of light. However, for phase-change metasurfaces to be able to provide viable technology for active light control, in situ electrical switching via resistive heaters integral to or embedded in the metasurface itself is highly desirable. In this context, good electrical conductors (metals) with high melting points (i.e., significantly above the melting point of commonly used phase-change alloys) are required. In addition, such metals should ideally have low plasmonic losses, so as to not degrade metasurface optical performance. This essentially limits the choice to a few noble metals, namely, gold and silver, but these tend to diffuse quite readily into phase-change materials (particularly the archetypal Ge2Sb2Te5 alloy used here), and into dielectric resonators such as Si or Ge. In this work, we introduce a novel hybrid dielectric/plasmonic metasurface architecture, where we incorporated a thin Ge2Sb2Te5 layer into the body of a cubic silicon nanoresonator lying on metallic planes that simultaneously acted as high-efficiency reflectors and resistive heaters. Through systematic studies based on changing the configuration of the bottom metal plane between high-melting-point diffusive and low-melting-point nondiffusive metals (Au and Al, respectively), we explicitly show how thermally activated diffusion can catastrophically and irreversibly degrade the optical performance of chalcogenide phase-change metasurface devices, and how such degradation can be successfully overcome at the design stage via the incorporation of ultrathin Si3N4 barrier layers between the gold plane and the hybrid Si/Ge2Sb2Te5 resonators. Our work clarifies the importance of diffusion of noble metals in thermally tunable metasurfaces and how to overcome it, thus helping phase-change-based metasurface technology move a step closer towards the realization of real-world applications.

High Tm linear poly(l-lactide)s prepared via alcohol-initiated ROPs of l-lactide

RSC Advances ◽  
2021 ◽  
Vol 11 (23) ◽  
pp. 14093-14102
Author(s):  
Hans R. Kricheldorf ◽  
Steffen M. Weidner ◽  
Andreas Meyer
Keyword(s):  
High Melting ◽  
Reaction Conditions ◽  
Linear Poly ◽  
A Performance

By variation of reaction conditions and catalysts a cyclic tin(ii) compound was found, which enables synthesis of high melting (>190 °C) poly(l-lactide) via ROP of l-lactide, whereas the technically used catalyst SnOct2 does not show such a performance.

scholarly journals A high melting (105 degrees C) form of chromatin characterizes the potential of cells for mitosis.

1987 ◽  
Vol 262 (31) ◽  
pp. 15071-15075
Author(s):  
M Almagor ◽  
R D Cole
Keyword(s):  
High Melting

Facile synthesis of high‐melting point spherical TiC and TiN powders at low temperature

2019 ◽  
Vol 103 (2) ◽  
pp. 889-898 ◽  
Author(s):  
Maoqiao Xiang ◽  
Miao Song ◽  
Qingshan Zhu ◽  
Chaoquan Hu ◽  
Yafeng Yang ◽  
...  
Keyword(s):  
Melting Point ◽  
Low Temperature ◽  
High Melting ◽  
High Melting Point ◽  
Facile Synthesis
Sign in / Sign up

Export Citation Format

Share Document