On a class of hybrid integral transformations (Bessel-Fourier-Bessel-...-Fourier-Bessel) on the polar axis with 2n junction points

1993 ◽  
Vol 45 (8) ◽  
pp. 1221-1229 ◽  
Author(s):  
M. P. Lenyuk ◽  
N. P. Oleinik
Keyword(s):  
Polar Axis ◽  
Integral Transformations ◽  
Hybrid Integral ◽  
Junction Points

Developing Homosexuality: Fritz Morgenthaler, Junction Points and Psychoanalytic Theory

2020 ◽  
Vol 22 (1) ◽  
pp. 79-101
Author(s):  
Aaron Lahl ◽  
Patrick Henze
Keyword(s):  
Coming Out ◽  
Psychoanalytic Theory ◽  
Self Psychology ◽  
Theoretical Development ◽  
Special Focus ◽  
Psychoanalytic Technique ◽  
Oedipal Complex ◽  
Junction Points ◽  
German Speaking ◽  
Original Thinker

The Swiss psychoanalyst Fritz Morgenthaler (1919–84) is well known in German-speaking psychoanalysis as an early exponent of Heinz Kohut's self psychology, as an ethnopsychoanalytic researcher and as an original thinker on the topics of dreams, psychoanalytic technique and especially on sexuality (perversions, heterosexuality, homosexuality). In 1980, he presented the first psychoanalytic conception of homosexuality in the German-speaking world that did not view homosexuality in terms of deviance or pathology. His theory of ‘junction points’ ( Weichenstellungen) postulates three decisive moments in the development of homosexuality: a prioritized cathexis of autoeroticism in narcissistic development, a Janus-facedness of homosexual desire as an outcome of the Oedipal complex and the coming out in puberty. According to Morgenthaler, this development can result in non-neurotic or neurotic homosexuality. Less known than the theory of junction points and to some degree even concealed by himself (his earlier texts appeared later on in corrected versions) are Morgenthaler's pre-1980 accounts of homosexuality which deserve to be called homophobic. Starting with a discussion of this early work, the article outlines Morgenthaler's theoretical development with special focus on his theory of junction points and how this theory was taken up in psychoanalytic theory.

Analysis of junction points in optimal aeroassisted orbital plane change

1997 ◽  
Author(s):  
Sang-Young Park ◽  
I. Ross ◽  
I. Ross ◽  
Sang-Young Park
Keyword(s):  
Orbital Plane ◽  
Junction Points ◽  
Plane Change

Thermoelectric properties of B12N12 molecule

2019 ◽  
Vol 16 ◽  
Author(s):  
Mohammad Reza Niazian ◽  
Laleh Farhang Matin ◽  
Mojtaba Yaghobi ◽  
Amir Ali Masoudi
Keyword(s):  
Molecular Electronics ◽  
Thermoelectric Properties ◽  
Electronic Devices ◽  
Thermal Conductance ◽  
Wide Band ◽  
Oscillatory Behavior ◽  
Mapping Technique ◽  
Junction Points ◽  
Inelastic Behaviour ◽  
New Generation

Background: Recently, molecular electronics have attracted the attention of many researchers, both theoretically and applied electronics.Nanostructures have significant thermal properties, which is why they are considered as good options for designing a new generation of integrated electronic devices. Objective: In this paper, the focus is on the thermoelectric properties of the molecular junction points with the electrodes. Also, the influence of the number of atom contacts was investigated on the thermoelectric properties of molecule located between two electrodes metallic.Therefore, the thermoelectric characteristics of the B12 N12 molecule are investigated. Methods: For this purpose, the Green’s function theory as well as mapping technique approach with the wide-band approximation and also the inelastic behaviour is considered for the electron-phonon interactions. Results & Conclusion: Results & Conclusion:It is observed that the largest values of the total part of conductance as well as its elastic (G(e,n)max) depends on the number of atom contacts and are arranged as: G(e,1)max>G(e,4)max>G(e,6)max. Furthermore, the largest values of the electronic thermal conductance, i.e. Kpmax is seen to be in the order of K(p,4)max < K(p,1)max < K(p,6)max that the number of main peaks increases in four-atom contacts at (E<Ef). Furthermore, it is represented that the thermal conductance shows an oscillatory behavior which is significantly affected by the number of atom contacts.

scholarly journals A Novel Composite with Structural Health Monitoring Functionality via 2D and 3D Impedance Mapping Topography

2021 ◽  
Vol 11 (4) ◽  
pp. 1647
Author(s):  
Georgios Foteinidis ◽  
Alkiviadis S. Paipetis
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Structural Integrity ◽  
Carbon Fabric ◽  
Structural Health ◽  
The Matrix ◽  
Junction Points ◽  
Sinusoidal Electric Field ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

We report the transformation of a conventional composite material into a multifunctional structure able to provide information about its structural integrity. A purposely positioned grid of carbon fabric strips located within a glass fibre laminate in alternating 0/90 configuration combined with a ternary nanomodified epoxy matrix imparted structural health monitoring (SHM) topographic capabilities to the composite using the impedance spectroscopy (IS) technique. The matrix was reinforced with homogenously dispersed multi-walled carbon nanotubes (MWCNTs) and carbon black (CB). A sinusoidal electric field was applied locally over a frequency range from 1 Hz to 100 kHz between the junction points of the grid of carbon fabric strips. The proposed design enabled topographic damage assessment after a high-velocity impact via the local monitoring of the impedance. The data obtained from the IS measurements were depicted by magnitude and phase delay Bode plots and Nyquist plots. The impedance values were used to create a 2D and a multi-layer (3D) contour topographical image of the damaged area, which revealed crucial information about the structural integrity of the composite.

Scanning electron microscopy observations of pollen morphology in common vetch (Vicia sativa) subspecies

2021 ◽  
pp. 1-14
Author(s):  
Rui Dong ◽  
Zhongjie Lu ◽  
Zhengyu Yang ◽  
Yanrong Wang ◽  
Chao Chen
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Pollen Morphology ◽  
Polar View ◽  
Polar Axis ◽  
Vicia Sativa ◽  
Common Vetch ◽  
Plant Phylogeny ◽  
Axis Length ◽  
Scanning Electron

Abstract Common vetch (Vicia sativa) is an important forage and green manure crop that is widely cultivated around the world. However, the large number of subspecies and accessions of common vetch has made taxonomic research on this species difficult. Pollen morphology data can provide important evidence in the study of plant phylogeny. Therefore, in this research, light microscopy and scanning electron microscopy were used to observe seven morphological traits of pollens from 22 common vetch accessions, and residual maximum likelihood and pattern analysis was conducted. The results showed that the pollen grains of the 22 accessions were all monad pollen and the polar view revealed three-lobed circular and triangular shapes, while the equatorial view mainly revealed an oblate shape; only one accession showed an oblate spherical shape. All accessions were 3-zonocolporate and the colpus length extended close to the poles. The polar axis length was (19.39 ± 0.97)–(42.12 ± 0.76) μm and the equatorial axis length was (35.97 ± 1.27)–(45.25 ± 0.81) μm. We found that qualitative traits of pollen shape, aperture polar view and ornamentation were highly stable. Among them, polar axis length, equatorial axis length and colpus length and width had significant differences among the accessions. The ratios of the equatorial and polar axes had significant differences among the subspecies. This trait information could be used for the classification and identification of common vetch accessions and subspecies.

Oospore dimensions and wall ornamentation in Chara braunii

Biologia ◽  
2008 ◽  
Vol 63 (4) ◽  
Author(s):  
Patrycja Boszke ◽  
Mariusz Pełechaty ◽  
Andrzej Pukacz
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Local Population ◽  
Polar Axis ◽  
Morphological Features ◽  
Cylindrical Shape ◽  
Reproductive Structures ◽  
Equatorial Diameter ◽  
Variable Character ◽  
Scanning Electron

AbstractMorphological features of oospores of a rarely noted species Chara braunii Gmel. were examined in a local population (fishpond near Tuplice village, Ziemia Lubuska region, mid-western Poland). The largest polar axis (LPA, length), largest equatorial diameter (LED, width), isopolarity index (ISI = LPA/LED* 100), and the number of ridges and width of fossa of 90 oospores were measured. Additionally, the oospore wall ornamentation pattern was examined by means of scanning electron microscopy (SEM). As a result, a cylindrical shape and the lack of so-called “shoulder” were found. Oospore length and width ranged between 466.8–600.1 µm and 250.1–366.7 µm, respectively, with the ISI index values between 148 and 213. The number of ridges was 8–10 and the width of fossa varied between 50.0 and 66.7 µm. The oospore width appeared to be the most changeable feature, whereas, by contrast, the number of ridges was the least variable character. Wall ornamentation can be described as tuberculate and a ribbon was present on the ridges. As a comparative material for the study performed, 9 oospores from Professor Izabela Dąmbska’s Collection of Charophytes of Poland were measured. It was evidenced that variation ranges of most of the features of Chara braunii oospores from Tuplice fishpond are similar to those of Professor Dąmbska’s herbarium materials and to data reported by authors from other countries as well. The morphology of reproductive structures does not follow the variation of thalli characteristics.

Sign in / Sign up

Export Citation Format

Share Document