Determination of chloride and bromide in lead telluride and bismuth telluride systems

1976 ◽  
Vol 66 (3-4) ◽  
pp. 225-232 ◽  
Author(s):  
L. Zanotti ◽  
F. Licci
Keyword(s):  
Bismuth Telluride ◽  
Lead Telluride

scholarly journals Experimental determination of phonon thermal conductivity and Lorenz ratio of single-crystal bismuth telluride

2017 ◽  
Vol 7 (4) ◽  
pp. 922-927 ◽  
Author(s):  
Mengliang Yao ◽  
Cyril Opeil ◽  
Stephen Wilson ◽  
Mona Zebarjadi
Keyword(s):  
Thermal Conductivity ◽  
Single Crystal ◽  
Experimental Determination ◽  
Bismuth Telluride ◽  
Phonon Thermal Conductivity ◽  
Image Position

Abstract

Synthesis and Thermoelectric Properties of Compositional-Modulated Lead Telluride–Bismuth Telluride Nanowire Heterostructures

Nano Letters ◽  
2013 ◽  
Vol 13 (5) ◽  
pp. 2058-2063 ◽  
Author(s):  
Haiyu Fang ◽  
Tianli Feng ◽  
Haoran Yang ◽  
Xiulin Ruan ◽  
Yue Wu
Keyword(s):  
Thermoelectric Properties ◽  
Bismuth Telluride ◽  
Lead Telluride ◽  
Nanowire Heterostructures

An efficient electrode for simultaneous determination of guanine and adenine using nano-sized lead telluride with graphene

2018 ◽  
Vol 42 (1) ◽  
pp. 564-573 ◽  
Author(s):  
Susmita Pradhan ◽  
Sudip Biswas ◽  
Dipak K. Das ◽  
Radhaballabh Bhar ◽  
Rajib Bandyopadhyay ◽  
...  
Keyword(s):  
Simultaneous Determination ◽  
Sodium Borohydride ◽  
Room Temperature ◽  
Lead Telluride ◽  
Guanine And Adenine

Herein, lead telluride (PbTe) nanocrystals were chemically synthesized at room temperature via reduction of homogeneous mixtures of tartrate complexes of Pb2+ and Te4+ with sodium borohydride.

Thermoelectric Properties of Single Crystal Alloys Bi8Sb32Te60, Bi9Sb31Te60 and Bi10Sb30Te60 Grown by the T.H.M. Method

1991 ◽  
Vol 234 ◽  
Author(s):  
T. Caillat ◽  
M. Carle ◽  
J. P. Fleurial ◽  
H. Scherrer ◽  
S. Scherrer
Keyword(s):  
Phase Diagram ◽  
Bismuth Telluride ◽  
Ternary Phase ◽  
Ternary Phase Diagram ◽  
Maximum Value ◽  
Equilibrium Data ◽  
P Type ◽  
Solid Alloys

ABSTRACTIt has been reported that high figures of merit could be achieved on bismuth telluride grown by T.H.M. (Travelling Heater Method). Further improvements could be obtained for the p-type materials by studying solid solutions formed by bismuth telluride and antimony telluride.A good knowledge of the ternary phase diagram is necessary to obtain homogeneous ingots by T.H.M..We present the results of the determination of ternary phase diagram (Bi-Sb-Te). The equilibrium data between liquid and solid alloys Bi8Sb32Te60, Bi9Sb31Te60 and Bi10Sb30Te60 are also reported and it allows their elaboration by T.H.M..Thermoelectric characterization of ternary samples is carried out as a function of stoichiometric deviations. Measurements of electrical and thermal conductivities as well as Seebeck coefficient were done at room temperature for the Bi8Sb32Te60, Bi9Sb31Te60 and Bi10Sb30Te60 alloys.The values of the figure of merit remain interesting for the alloys studied and a maximum value of 3.2 10−3 K−1 is reached for the Bi9Sb31Te60 alloy.

scholarly journals Effect of temperature mismatch on the life cycle of thermoelectric generator efficiency for waste heat recovery

2021 ◽  
Vol 335 ◽  
pp. 03010
Author(s):  
Lim Zi Feng ◽  
Lim Joon Hoong
Keyword(s):  
Life Cycle ◽  
Thermoelectric Material ◽  
Bismuth Telluride ◽  
Silicon Germanium ◽  
Thermal Gradient ◽  
Thermoelectric Generator ◽  
Waste Heat ◽  
Lead Telluride ◽  
Effect Of Temperature ◽  
Cold Side

Global warming due to greenhouse gases that has been produced by energy generator as a byproduct has becoming a serious issue in recent decades. Thermoelectric module is an alternative method that can generate energy from heat and vice versa. The module is denominated as thermoelectric generator (TEG) when it is used to generate electricity via a process called the Seebeck effect. The use of thermoelectric generator has become more and more demanding due to the low maintenance cost and waste heat availability can be found everywhere in daily life such as car exhaust, roof tiles, and etc. The purpose of this research paper was to determine the effect of temperature mismatch on the life cycle of the thermoelectric generator efficiency using ANSYS simulation. The common used materials for the thermoelectric are bismuth telluride, lead telluride and silicon germanium. Each material has different thermal conductivity, Seebeck coefficient and electrical resistivity. The materials are paired together to form a thermocouple and the thermal gradient of the TEG is being evaluate through the simulation. Generally, the greater the temperature between the hot and cold side of the TEG, the higher the power generated. Bismuth telluride has a highest temperature difference between the hot and cold side followed by lead telluride and silicon germanium. The combination of BiTe(N) - BiTe(P) has the lowest minimum heat flux compared to the rest of the thermoelectric material combination. This proves that thermal and electrical properties and combination of thermoelectric material plays a vital role in the thermal gradient of the TEG.

Sign in / Sign up

Export Citation Format

Share Document