Effect of temperature on physical and mechanical properties of an alloy in the Ti−Al−W−Zr system

1998 ◽  
Vol 40 (12) ◽  
pp. 493-496
Author(s):  
É. I. Illarionov
Keyword(s):  
Mechanical Properties ◽  
Physical And Mechanical Properties ◽  
Effect Of Temperature

scholarly journals Effect of Temperature and Sisal Fiber Content on the Properties of Plaster of Paris

2018 ◽  
Vol 7 (4.20) ◽  
pp. 205 ◽  
Author(s):  
Aqil M. ALmusawi ◽  
Thulfiqar S. Hussein ◽  
Muhaned A. Shallal
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperatures ◽  
Physical And Mechanical Properties ◽  
Fiber Content ◽  
Sisal Fiber ◽  
Effect Of Temperature ◽  
Plaster Of Paris ◽  
Micro Cracks ◽  
Recent Developments ◽  
Negative Effect

Recent developments in the production of ecologically friendly building composites have led to a renewed interest in the use of vegetable fibers as a reinforcement element. Traditional pure Plaster of Paris (POP) can suffer from the development of micro-cracks due to thermal expansion. Therefore, sisal fiber was studied for its potential as an ecological element to restrict and delay the development of micro-cracks in POP. Different sisal proportions of 0, 2, 4, 6, 8 and 10 wt. % of POP were used to characterize the physical and mechanical properties of POP at the ambient temperature. Then, the effects of temperatures of 25, 100, 200, 300, 400 and 500  were investigated. Results proved that the composite of 10% sisal fiber had the best mechanical properties. Also, when the fiber content was increased, the composite’s performance was enhanced, becoming better able to resist elevated temperatures. However, raising the temperature to 300 or above had a negative effect on the mechanical properties, which were significantly decreased due to the degradation of the sisal fiber. 

Study on the Mechanism of Woven Cotton Fabric during Steam Ironing

2015 ◽  
Vol 671 ◽  
pp. 179-185 ◽  
Author(s):  
Fan Wu ◽  
Shuai Tong Liang ◽  
Xue Mei Ding
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Physical And Mechanical Properties ◽  
Cotton Fabrics ◽  
Temperature Treatment ◽  
Woven Fabrics ◽  
Effect Of Temperature ◽  
High Temperature Treatment ◽  
Recovery Rates ◽  
Basic Parameters

Cotton fabrics are very popular textile products to consumers due to their soft hand and comfortable wearing performance. However, the severe wrinkles on cotton fabrics will frequently happen after washing or wearing. As the growth of the market and demand of consumers, the sales of the steam ironing machine which can remove wrinkles to some extent is getting better. At present, the research is inadequate on the wrinkling mechanism during steam ironing. Therefore, in this paper, we aimed to investigate how cotton woven fabrics’ performance influences on the smoothness appearance after steam ironing. To further analyze wrinkling mechanism, fabrics’ wrinkle recovery rates which comprehensive characterize the physical and mechanical properties were tested with PhabrOmeter, including wrinkle recovery rates at normal temperature and after high temperature treatment. Then, the effect of temperature to fabrics’ wrinkle recovery rates and its relationship with fabrics’ smoothness appearance after ironing were studied. The results indicate that there are no significant correlations between the fabric basic parameters with smoothness appearance after ironing. The effect of temperature during ironing can improve the wrinkle recovery rates about 6%-21%. And no significant correlation is showed between smoothness appearance after ironing and wrinkle recovery rates. Keywords: Steam Ironing; mechanism; fabric parameters; wrinkle recovery rate.

scholarly journals Radiation and thermal effects upon mechanics of polymer composites

2020 ◽  
Vol 4 (394) ◽  
pp. 89-98
Author(s):  
Sergei I. Emelyanov ◽  
Nikolay L. Kuchin ◽  
Boris A. Yartsev ◽  
Vladimir L. Lebedev
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Radiation Effects ◽  
Nuclear Reactions ◽  
Extreme Temperature ◽  
Physical And Mechanical Properties ◽  
Computational Prediction ◽  
Effect Of Temperature ◽  
Dynamic Methods ◽  
Structural Applications

Object and purpose of research. This paper discusses polymeric composites of various structural applications that may be exposed to extreme temperature and/or radiation, with possible implications for their physical and mechanical properties. Materials and methods. We used static and dynamic methods for determining the constants characterizing the mechanical properties of polymer composites. The analysis of numerous nuclear reactions occurring during neutron irradiation of a polymer composite with a certain chemical composition was carried out by the method of computational prediction. The results of this analysis confirm the change in the composition of the composite and the possibility of changing its internal structure. Main results. Suitability of the investigated composites for the applications accompanied by high-temperature and radiation effects, like foundations of marine nuclear reactors, has been confirmed. Conclusion. For the considered range of temperature and radiation effects, the effect of temperature on structural performance of a composite determined, in its turn, by the mechanical properties of its matrix, is the most significant, while radiation exposure turned out to be less important. Developing polymer composites for more intense radiation environments, like neutron fluxes or gamma rays, it is advisable to optimize their chemistry so as to reduce or totally eliminate the elements capable of generating long-lived radionuclides.

scholarly journals Composition, Properties and Using Fields of Product of Phosphogypsum Recycling

2020 ◽  
Author(s):  
Fedor Kapustin ◽  
Nikolay Mityushov ◽  
Sergey Bednyagin
Keyword(s):  
Mechanical Properties ◽  
Portland Cement ◽  
Building Materials ◽  
Setting Time ◽  
Physical And Mechanical Properties ◽  
Mineral Admixtures ◽  
Copper Smelting ◽  
Effect Of Temperature ◽  
Mineral Additive ◽  
Composition Properties

Nowadays about 200 million tons of phosphogypsum (PG) have been stored in the dumps of the chemical industry and non–ferrous metallurgy of Russia which pollutes the environment. This waste contains up to 98 % of two–water gypsum and impurities including rare earth metals (REM) in an amount of up to 0.5 % preventing its use in the production of building materials. A complex technology of FG recycling including extraction of REM, neutralization and dehydration of the pulp for using in the production of gypsum binders and Portland cement. Results of determination of density, grain, chemical and mineral compositions and structure of the product of recycling of FG of the “Sredneuralsky copper smelting plant” are presented. After the REM extraction, the PG is a loose lumpy mass with moisture content of 28–32 % which contains about 10 % of particles larger than 40 mm and not more than 60 % of particles less than 10 mm, it has a true density of 2.26 g/cm3, pH of aqueous extract is 5.95. It has the following chemical composition, mass. %: 0.87 SiО2; 0.93 A12O3; 0.20 Fe2O3; 31.00 CaO; 0.034 MgO; 44.27 SО3; 0.10 K2О; 0.42 Nа2О; 0.45 Р2О5(general); 20.73 of mass loss of ignition. The mineral composition of the PG processing product is represented by two-water gypsum and a slight amount of quartz. The possibility of using gypsum–containing waste in the production of gypsum binders and cement is considered. The effect of temperature and duration of firing, the dispersion, the type and quantity of chemical and mineral admixtures on physical and mechanical properties of gypsum binder, the influence of the type and amount of mineral additive on pelletizing and physic–mechanical properties of the granulated and pressed PG and its effects on setting time and strength of Portland cement are represented. It is recommended to use PG to obtain low–temperature and composite gypsum binders, regulation of Portland cement setting after extraction of REM. Keywords: phosphogypsum, recycling, composition, properties, technology, gypsum binder, Portland cement

scholarly journals Mechanical Properties of Sandstone using non-Destructive Method

2020 ◽  
Vol 241 ◽  
pp. 113
Author(s):  
H. Rajaoalison ◽  
A. Zlotkowski ◽  
G. Rambolamanana
Keyword(s):  
Mechanical Properties ◽  
Physical And Mechanical Properties ◽  
Ultrasonic Waves ◽  
Effect Of Temperature ◽  
Drilling Process ◽  
Wellbore Instability ◽  
S Waves ◽  
Coefficient Corrélation ◽  
Rock Parameters ◽  
Non Destructive

The understanding of physical and mechanical properties of rock is considered as critical in drilling, geo-engineering, and construction applications. As an example, the awareness of these rock parameters contributes to avoid or minimizing instability around the wellbore while drilling. The laboratory experiment of understanding of these parameters can be done in two-different ways: static, where the sample subjects to destruction after the test and dynamic, known as non-destruction method. The non-destructive method using ultrasonic waves under a series of different stress conditions, starting from 7 to 56 MPa with incrementation of 7MPa, has been used in this paper in order to characterize the mechanical properties of dry Zbylutów sandstone at 20 and 80°C. The velocity of primary (P) and secondary (S) waves within these ranges has been recorded in order to understand the behavior of the mechanical properties. The results showed that the Young’s modulus, bulk modulus, shear modulus, and Lame’s constant of Zbylutów sandstone have a positive correlation with good coefficient correlation with the increased stress, while the Poisson’s ratio showed a negative correlation. Besides, the effect of temperature on the rock parameters is approved by the decrease of primary wave velocity in this two-different temperature range. Such results are necessary when preparing the appropriate mud weight for drilling process, which is related to wellbore instability.  

Sign in / Sign up

Export Citation Format

Share Document