scholarly journals Modelling the effect of temperature on the physical and mechanical properties of ceramic composites filled with foundry sand waste

2019 ◽  
Vol 1386 ◽  
pp. 012126
Author(s):  
KL Roa ◽  
RA Paredes ◽  
F Trejo ◽  
HF Castro ◽  
E Vera ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Physical And Mechanical Properties ◽  
Ceramic Composites ◽  
Effect Of Temperature ◽  
Foundry Sand

scholarly journals Effect of Temperature and Sisal Fiber Content on the Properties of Plaster of Paris

2018 ◽  
Vol 7 (4.20) ◽  
pp. 205 ◽  
Author(s):  
Aqil M. ALmusawi ◽  
Thulfiqar S. Hussein ◽  
Muhaned A. Shallal
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperatures ◽  
Physical And Mechanical Properties ◽  
Fiber Content ◽  
Sisal Fiber ◽  
Effect Of Temperature ◽  
Plaster Of Paris ◽  
Micro Cracks ◽  
Recent Developments ◽  
Negative Effect

Recent developments in the production of ecologically friendly building composites have led to a renewed interest in the use of vegetable fibers as a reinforcement element. Traditional pure Plaster of Paris (POP) can suffer from the development of micro-cracks due to thermal expansion. Therefore, sisal fiber was studied for its potential as an ecological element to restrict and delay the development of micro-cracks in POP. Different sisal proportions of 0, 2, 4, 6, 8 and 10 wt. % of POP were used to characterize the physical and mechanical properties of POP at the ambient temperature. Then, the effects of temperatures of 25, 100, 200, 300, 400 and 500  were investigated. Results proved that the composite of 10% sisal fiber had the best mechanical properties. Also, when the fiber content was increased, the composite’s performance was enhanced, becoming better able to resist elevated temperatures. However, raising the temperature to 300 or above had a negative effect on the mechanical properties, which were significantly decreased due to the degradation of the sisal fiber. 

Study on the Mechanism of Woven Cotton Fabric during Steam Ironing

2015 ◽  
Vol 671 ◽  
pp. 179-185 ◽  
Author(s):  
Fan Wu ◽  
Shuai Tong Liang ◽  
Xue Mei Ding
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Physical And Mechanical Properties ◽  
Cotton Fabrics ◽  
Temperature Treatment ◽  
Woven Fabrics ◽  
Effect Of Temperature ◽  
High Temperature Treatment ◽  
Recovery Rates ◽  
Basic Parameters

Cotton fabrics are very popular textile products to consumers due to their soft hand and comfortable wearing performance. However, the severe wrinkles on cotton fabrics will frequently happen after washing or wearing. As the growth of the market and demand of consumers, the sales of the steam ironing machine which can remove wrinkles to some extent is getting better. At present, the research is inadequate on the wrinkling mechanism during steam ironing. Therefore, in this paper, we aimed to investigate how cotton woven fabrics’ performance influences on the smoothness appearance after steam ironing. To further analyze wrinkling mechanism, fabrics’ wrinkle recovery rates which comprehensive characterize the physical and mechanical properties were tested with PhabrOmeter, including wrinkle recovery rates at normal temperature and after high temperature treatment. Then, the effect of temperature to fabrics’ wrinkle recovery rates and its relationship with fabrics’ smoothness appearance after ironing were studied. The results indicate that there are no significant correlations between the fabric basic parameters with smoothness appearance after ironing. The effect of temperature during ironing can improve the wrinkle recovery rates about 6%-21%. And no significant correlation is showed between smoothness appearance after ironing and wrinkle recovery rates. Keywords: Steam Ironing; mechanism; fabric parameters; wrinkle recovery rate.

scholarly journals Porogen Effect of Bioactive Glass on Poly(L-lactide) Scaffolds: Evidences by Electron Microscopy

2008 ◽  
Vol 14 (S3) ◽  
pp. 65-66
Author(s):  
N.B. Barroca ◽  
A.L. Daniel-da-Silva ◽  
M.H.V. Fernandes ◽  
P.M. Vilarinho
Keyword(s):  
Mechanical Properties ◽  
Bioactive Glass ◽  
Average Pore Size ◽  
Physical And Mechanical Properties ◽  
Ceramic Composites ◽  
Porous Polymer ◽  
Bioactive Glasses ◽  
Average Pore ◽  
Thermally Induced ◽  
Ceramic Fillers

Recently, porous polymer-ceramic composites have been developed and represent promising scaffolds to be used as synthetic extracellular matrix in bone tissue engineering since they combine the advantages of these two types of materials. On the other hand bioactive glasses (BG) have been used as ceramic fillers to promote bioactivity and to enhance mechanical properties and osteoblast functions. Among all the requirements, these 3D porous structures should have a controllable average pore size larger than 100 μm as well as good pore interconnectivity to allow vascularization and tissue ingrowth. The goal of this study is to investigate the effect of the addition of a bioactive glass on the porous structure development of the scaffolds prepared by thermally induced phase-separation and also to test the bioactivity of these composite scaffolds. Poly (L-lactic) acid (PLLA) was chosen as the polymer matrix because of its well-known biocompatibility and adjustable physical and mechanical properties. Micron-sized (<10 μm) glass from the 3CaO.P2O5-MgO-SiO2 system was produced in our laboratory and used as the bioactive ceramic filler.

scholarly journals Radiation and thermal effects upon mechanics of polymer composites

2020 ◽  
Vol 4 (394) ◽  
pp. 89-98
Author(s):  
Sergei I. Emelyanov ◽  
Nikolay L. Kuchin ◽  
Boris A. Yartsev ◽  
Vladimir L. Lebedev
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Radiation Effects ◽  
Nuclear Reactions ◽  
Extreme Temperature ◽  
Physical And Mechanical Properties ◽  
Computational Prediction ◽  
Effect Of Temperature ◽  
Dynamic Methods ◽  
Structural Applications

Object and purpose of research. This paper discusses polymeric composites of various structural applications that may be exposed to extreme temperature and/or radiation, with possible implications for their physical and mechanical properties. Materials and methods. We used static and dynamic methods for determining the constants characterizing the mechanical properties of polymer composites. The analysis of numerous nuclear reactions occurring during neutron irradiation of a polymer composite with a certain chemical composition was carried out by the method of computational prediction. The results of this analysis confirm the change in the composition of the composite and the possibility of changing its internal structure. Main results. Suitability of the investigated composites for the applications accompanied by high-temperature and radiation effects, like foundations of marine nuclear reactors, has been confirmed. Conclusion. For the considered range of temperature and radiation effects, the effect of temperature on structural performance of a composite determined, in its turn, by the mechanical properties of its matrix, is the most significant, while radiation exposure turned out to be less important. Developing polymer composites for more intense radiation environments, like neutron fluxes or gamma rays, it is advisable to optimize their chemistry so as to reduce or totally eliminate the elements capable of generating long-lived radionuclides.

scholarly journals Recycling of Foundry Sand Wastes in Self-Compacting Mortars: Use as Cementitious Materials and Fine Aggregates

2019 ◽  
Vol 9 (2) ◽  
pp. 195-200 ◽  
Author(s):  
Ghania Sebki ◽  
Brahim Safi ◽  
Kahina Chahour
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Compressive Strength ◽  
Strain Curve ◽  
Physical And Mechanical Properties ◽  
Cementitious Materials ◽  
Fine Aggregate ◽  
Stress Strain Curve ◽  
Foundry Sand ◽  
Fine Aggregates

Abstract This work aims to study the possibility recycling of foundry sand wastes (FSW) as a cementations additive and fine aggregate in self-compacting mortars (SCM). For this, an experimental study was carried out to evaluate physical and mechanical properties of SCM. Firstly, sand is substituted by the foundry sand waste at dosages (0%, 10%, 30%, and 50%) by weight of the sand. Secondly cement is partially substituted by crushed foundry sand waste at different ratio (0%, 10%, 20%, 30%, and 50%) by weight of cement. The obtained results show that up to 50%, (FSW) can be used as fine aggregate for mortars without affecting the essential proprieties of mortar. However, beyond 50% of sand substitution, mortars lose their fluidity. The compressive strength of the mortars with 50% of cement substitution decreased compared to the control mortar. Value of the highest compressive strength recorded at 28 days, is of the order of 50 MPa for the mortar with 20% of cement substitution. Also, stress-strain curve show an acceptable mechanical behavior of FSW-based mortar at 50% of sand substitution.

Sign in / Sign up

Export Citation Format

Share Document