scholarly journals Camera and inertial sensor fusion for the PnP problem: algorithms and experimental results

2021 ◽  
Vol 32 (4) ◽  
Author(s):  
Luigi D’Alfonso ◽  
Emanuele Garone ◽  
Pietro Muraca ◽  
Paolo Pugliese
Keyword(s):  
Pose Estimation ◽  
Good Accuracy ◽  
Inertial Sensor ◽  
Experimental Tests ◽  
Inertial Measurement Units ◽  
Magnetic Vector ◽  
Inertial Measurement ◽  
The Earth ◽  
Measurement Units ◽  
Position And Orientation

AbstractIn this work, we face the problem of estimating the relative position and orientation of a camera and an object, when they are both equipped with inertial measurement units (IMUs), and the object exhibits a set of n landmark points with known coordinates (the so-called Pose estimation or PnP Problem). We present two algorithms that, fusing the information provided by the camera and the IMUs, solve the PnP problem with good accuracy. These algorithms only use the measurements given by IMUs’ inclinometers, as the magnetometers usually give inaccurate estimates of the Earth magnetic vector. The effectiveness of the proposed methods is assessed by numerical simulations and experimental tests. The results of the tests are compared with the most recent methods proposed in the literature.

scholarly journals Automatic pairing of inertial sensors to lower limb segments – a plug-and-play approach

2016 ◽  
Vol 2 (1) ◽  
pp. 715-718 ◽  
Author(s):  
David Graurock ◽  
Thomas Schauer ◽  
Thomas Seel
Keyword(s):  
Sensor Networks ◽  
Lower Limb ◽  
Healthy Subjects ◽  
Inertial Sensors ◽  
Inertial Sensor ◽  
Lower Limbs ◽  
Inertial Measurement Units ◽  
Inertial Measurement ◽  
Correct Pairing ◽  
Measurement Units

AbstractInertial sensor networks enable realtime gait analysis for a multitude of applications. The usability of inertial measurement units (IMUs), however, is limited by several restrictions, e.g. a fixed and known sensor placement. To enhance the usability of inertial sensor networks in every-day live, we propose a method that automatically determines which sensor is attached to which segment of the lower limbs. The presented method exhibits a low computational workload, and it uses only the raw IMU data of 3 s of walking. Analyzing data from over 500 trials with healthy subjects and Parkinson’s patients yields a correct-pairing success rate of 99.8% after 3 s and 100% after 5 s.

scholarly journals Inertial measurement units for the detection of the effects of simulated leg length inequalities

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Hannah Lena Siebers ◽  
Jörg Eschweiler ◽  
Valentin M. Quack ◽  
Markus Tingart ◽  
Marcel Betsch
Keyword(s):  
Stance Phase ◽  
Inertial Sensor ◽  
Knee Extension ◽  
Inertial Measurement Units ◽  
Leg Length ◽  
Joint Angles ◽  
Inertial Measurement ◽  
Hip Abduction ◽  
Measurement Units ◽  
Healthy Participants

Abstract Background Leg length inequalities (LLI) are a common condition that can be associated with detrimental effects like low back pain and osteoarthritis. Inertial measurement units (IMUs) offer the chance to analyze daily activities outside a laboratory. Analyzing the kinematic effects of (simulated) LLI on the musculoskeletal apparatus using IMUs will show their potentiality to improve the comprehension of LLI. Methods Twenty healthy participants with simulated LLI of 0-4 cm were analyzed while walking with an inertial sensor system (MyoMotion). Statistical evaluation of the peak anatomical angles of the spine and legs were performed using repeated measurement (RM) ANOVA or their non-parametric test versions (Friedman test). Results Lumbar lateral flexion and pelvic obliquity increased during the stance phase of the elongated leg and decreased during its swing phase. The longer limb was functionally shortened by higher hip and knee flexion, higher hip adduction, dorsiflexion, and lower ankle adduction. Finally, the shorter leg was lengthened by higher hip and knee extension, hip abduction, ankle plantarflexion, and decreased hip adduction. Conclusion We found differing compensation strategies between the different joints, movement planes, gait phases, and amounts of inequality. Overall the shorter leg is lengthened and the longer leg is shortened during walking, to retain the upright posture of the trunk. IMUs were helpful and precise in the detection of anatomical joint angles and for the analysis of the effects of LLI.

A proposal for patient-tailored supervision of movement performance during end-effector-based robot-assisted rehabilitation of the upper extremities

2015 ◽  
Vol 60 (3) ◽  
Author(s):  
Michael Hennes ◽  
Kai Bollue ◽  
Henry Arenbeck ◽  
Catherine Disselhorst-Klug
Keyword(s):  
Experimental Tests ◽  
Inertial Measurement Units ◽  
Robot Assisted ◽  
End Effector ◽  
Rehabilitation Process ◽  
Inertial Measurement ◽  
Movement Performance ◽  
Movement Strategies ◽  
Rehabilitation System ◽  
Measurement Units

AbstractMillions of people worldwide suffer from stroke each year. One way to assist patients cost-effectively during their rehabilitation process is using end-effector-based robot-assisted rehabilitation. Such systems allow patients to use their own movement strategies to perform a movement task, which encourages them to do self-motivated training but also allow compensation movements if they have problems executing the movement tasks. Therefore, a patient supervision system was developed on the basis of inertial measurement units and a patient-tailored movement interpretation system. Very light and small inertial measurement units were developed to record the patients’ movements during a teaching phase in which the desired movement is shown to the patient by a physiotherapist. During a following exercise phase, the patient is training the previously shown movement alone with the help of an end-effector-based robot-assisted rehabilitation system, and the patient’s movement is recorded again. The data from the teaching and exercise phases are compared with each other and evaluated by using fuzzy logic tailored to each patient. Experimental tests with one healthy subject and one stroke patient showed the capability of the system to supervise patient movements during the robot-assisted end-effector-based rehabilitation.

scholarly journals Analysis of ergonomic and unergonomic human lifting behaviors by using Inertial Measurement Units

2017 ◽  
Vol 3 (1) ◽  
pp. 7-10 ◽  
Author(s):  
Jan Kuschan ◽  
Henning Schmidt ◽  
Jörg Krüger
Keyword(s):  
Quality Of Life ◽  
Machine Learning ◽  
Angular Velocity ◽  
Musculoskeletal System ◽  
Occupational Diseases ◽  
Inertial Measurement Units ◽  
Inertial Measurement ◽  
Measurement Units ◽  
Main Components

Abstract:This paper presents an analysis of two distinct human lifting movements regarding acceleration and angular velocity. For the first movement, the ergonomic one, the test persons produced the lifting power by squatting down, bending at the hips and knees only. Whereas performing the unergonomic one they bent forward lifting the box mainly with their backs. The measurements were taken by using a vest equipped with five Inertial Measurement Units (IMU) with 9 Dimensions of Freedom (DOF) each. In the following the IMU data captured for these two movements will be evaluated using statistics and visualized. It will also be discussed with respect to their suitability as features for further machine learning classifications. The reason for observing these movements is that occupational diseases of the musculoskeletal system lead to a reduction of the workers’ quality of life and extra costs for companies. Therefore, a vest, called CareJack, was designed to give the worker a real-time feedback about his ergonomic state while working. The CareJack is an approach to reduce the risk of spinal and back diseases. This paper will also present the idea behind it as well as its main components.

scholarly journals Inertial measurement units to estimate drag forces and power output during standardised wheelchair tennis coast-down and sprint tests

2021 ◽  
pp. 1-19
Author(s):  
Thomas Rietveld ◽  
Barry S. Mason ◽  
Victoria L. Goosey-Tolfrey ◽  
Lucas H. V. van der Woude ◽  
Sonja de Groot ◽  
...  
Keyword(s):  
Power Output ◽  
Inertial Measurement Units ◽  
Inertial Measurement ◽  
Drag Forces ◽  
Measurement Units

scholarly journals Measurement of respiratory rate with inertial measurement units

2020 ◽  
Vol 6 (3) ◽  
pp. 237-240
Author(s):  
Simon Beck ◽  
Bernhard Laufer ◽  
Sabine Krueger-Ziolek ◽  
Knut Moeller
Keyword(s):  
Air Pollution ◽  
Respiratory Rate ◽  
Frequency Analysis ◽  
Clinical Settings ◽  
Breathing Rate ◽  
Demographic Changes ◽  
Inertial Measurement Units ◽  
Inertial Measurement ◽  
Respiratory Parameters ◽  
Measurement Units

AbstractDemographic changes and increasing air pollution entail that monitoring of respiratory parameters is in the focus of research. In this study, two customary inertial measurement units (IMUs) are used to measure the breathing rate by using quaternions. One IMU was located ventral, and one was located dorsal on the thorax with a belt. The relative angle between the quaternion of each IMU was calculated and compared to the respiratory frequency obtained by a spirometer, which was used as a reference. A frequency analysis of both signals showed that the obtained respiratory rates vary slightly (less than 0.2/min) between the two systems. The introduced belt can analyse the respiratory rate and can be used for surveillance tasks in clinical settings.

scholarly journals Accuracy and Repeatability of Spatiotemporal Gait Parameters Measured with an Inertial Measurement Unit

2021 ◽  
Vol 10 (9) ◽  
pp. 1804
Author(s):  
Jorge Posada-Ordax ◽  
Julia Cosin-Matamoros ◽  
Marta Elena Losa-Iglesias ◽  
Ricardo Becerro-de-Bengoa-Vallejo ◽  
Laura Esteban-Gonzalo ◽  
...  
Keyword(s):  
Healthy Subjects ◽  
Inertial Measurement Unit ◽  
Measurement Unit ◽  
Inertial Measurement Units ◽  
Inertial Measurement ◽  
High Speeds ◽  
Controlled Conditions ◽  
Gait Parameters ◽  
Measurement Units ◽  
Accuracy And Repeatability

In recent years, interest in finding alternatives for the evaluation of mobility has increased. Inertial measurement units (IMUs) stand out for their portability, size, and low price. The objective of this study was to examine the accuracy and repeatability of a commercially available IMU under controlled conditions in healthy subjects. A total of 36 subjects, including 17 males and 19 females were analyzed with a Wiva Science IMU in a corridor test while walking for 10 m and in a threadmill at 1.6 km/h, 2.4 km/h, 3.2 km/h, 4 km/h, and 4.8 km/h for one minute. We found no difference when we compared the variables at 4 km/h and 4.8 km/h. However, we found greater differences and errors at 1.6 km/h, 2.4 km/h and 3.2 km/h, and the latter one (1.6 km/h) generated more error. The main conclusion is that the Wiva Science IMU is reliable at high speeds but loses reliability at low speeds.

Sign in / Sign up

Export Citation Format

Share Document