Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing

2020 ◽  
Vol 107 (5-6) ◽  
pp. 1947-1956 ◽  
Author(s):  
Emre Tascioglu ◽  
Yusuf Karabulut ◽  
Yusuf Kaynak
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Additive Manufacturing ◽  
Heat Treatment Temperature ◽  
316L Stainless Steel ◽  
Wear Behavior ◽  
Treatment Temperature ◽  
Powder Bed

Effect of Heat Treatment Temperature and Lubricating Conditions on the Fretting Wear Behavior of SAF 2507 Super Duplex Stainless Steel

2019 ◽  
Vol 141 (10) ◽  
Author(s):  
Mengjiao Wang ◽  
Yunxia Wang ◽  
Jianzhang Wang ◽  
Na Fan ◽  
Fengyuan Yan
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Wear Resistance ◽  
Duplex Stainless Steel ◽  
Wear Behavior ◽  
Treatment Temperature ◽  
Fretting Wear ◽  
Super Duplex Stainless Steel ◽  
Wear Performance ◽  
Seawater Lubrication

Super duplex stainless steel (SDSS) has excellent mechanical properties and corrosion resistance. However, currently, there are few researches conducted on its fretting wear performance. This paper studies the influence of different heat treatment temperatures and medium environment on the fretting wear performance of SAF 2507 SDSS. Results show that the combined effect of the sigma phase and seawater lubrication can significantly improve the wear resistance of SAF 2507 SDSS. After treated with different heat treatment temperatures, different contents of sigma phases are precipitated out of SAF 2507 SDSS, which improves the wear resistance of the material to different degrees. In addition, the fretting wear performance of SAF 2507 SDSS also relates to the lubrication medium. In air, the friction and wear performance of SAF 2507 SDSS is poor, while in seawater, solution and corrosion products that acted as a lubricant dramatically improve the wear resistance of the material. Under the combined action of heat treatment and seawater lubrication medium, the friction coefficient and wear reduce by 70% and 91%, respectively.

scholarly journals Effects of Si and Sn Contents and Heat-Treatment Temperature on the Corrosion Behavior of AISI 439 Ferrite Stainless Steel

2022 ◽  
Vol 60 (1) ◽  
pp. 26-34
Author(s):  
Chan Yang Kim ◽  
Do hyung Kim ◽  
Won sub Chung
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Passive Film ◽  
Heat Treatment Temperature ◽  
Inhibitory Effect ◽  
Heat Treatment Condition ◽  
Treatment Temperature ◽  
Fe Oxide ◽  
The Stability

This study was conducted to evaluate the corrosion resistance and optimize the heat-treatment process of AISI 439 ferrite stainless steel silicon and tin alloys with reduced chromium. The microstructure of the specimens and deposition under each condition were analyzed. The production of oxide films was compared based on the thickness of the film and the change in the contents of each element. In addition, electrochemical analyses of each heat-treatment condition was used to quantitatively compare corrosion resistance and passive film stability based on the relative chromium, silicon, and tin contents. It was found that the addition of silicon and tin compensated for the decrease in corrosion resistance induced by the chromium reduction. The addition of the two elements inhibited iron (Fe) oxide production in the surface oxide film, thereby improving the corrosion resistance of the material and improving the stability of the passive film. Moreover, the SiO2 and SnO2 layers inhibited the production of Fe oxide and contributed to the stability of the film along with Cr2O3, the main component of the passive film. However, when the heat treatment temperature increased above a specific temperature, the oxide inhibitory effect of the two elements was relatively offset. Nevertheless, further research to optimize the content of the three elements will help develop materials with superior mechanical properties and corrosion resistance.

Effect of cooling rate after heat treatment on pitting corrosion of super duplex stainless steel UNS S 32750

2018 ◽  
Vol 65 (5) ◽  
pp. 492-498 ◽  
Author(s):  
Byung-Hyun Shin ◽  
Junghyun Park ◽  
Jongbae Jeon ◽  
Sung-bo Heo ◽  
Wonsub Chung
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Cooling Rate ◽  
Pitting Corrosion ◽  
Heat Treatment Temperature ◽  
Secondary Phase ◽  
Treatment Temperature ◽  
Super Duplex Stainless Steel ◽  
Content Type

Purpose In this study, super duplex stainless steel (SDSS) was heat-treated. The purpose of this study is to assess the effect of the cooling rate after heat treatment on the pitting corrosion of SDSS. Design/methodology/approach The heat treatment from 1,000°C to 1,300°C was applied to SDSS to check the effect of the cooling rate. Findings The heat treatment temperature produced a different SDSS microstructure, and the cooling rate led to the growth of austenite. The casted SDSS indicated the presence of heterogeneous austenite, and the precipitation secondary phase under 1.6 per cent precipitated to bare metal. By applying heat treatment and cooling SDSS, its corrosion resistance changes because of the change in the chemical composition. The cooling rate at 5,600 J/s has the highest critical pitting temperature (CPT) at 1,100°C, and the cooling rate at 1.6 J/s has the highest CPT at 1,200°C. Low cooling rate (0.4 J/s) made the secondary phase at all temperature range. Research limitations/implications The effect of secondary phase not consider because that is well known to decreasing corrosion resistance. Practical implications Solution annealing is taken into account to optimize the corrosion resistance. But that is not consider the cooling rate at each temperature. This study assessed the effect of the cooling rate at each temperature point. Social implications Manufacturers need to know the effect of the cooling rate to optimize the corrosion resistance, and this study can be applied in the industrial scene. Originality/value SDSS is hard the optimization because SDSS is a dual-phase stainless steel. Corrosion resistance can be optimized by controlling heat treatment temperature and the cooling rate. Anyone not studied the effect of the cooling rate at each temperature. The effect of the cooling rate should be considered to optimize the corrosion resistance.

Sign in / Sign up

Export Citation Format

Share Document