scholarly journals System design and experimental research on the tangential ultrasonic vibration-assisted grinding gear

2021 ◽  
Author(s):  
Wenbo Bie ◽  
Bo Zhao ◽  
Chongyang Zhao ◽  
Long Yin ◽  
Xingchen Guo
Keyword(s):  
System Design ◽  
Ultrasonic Vibration ◽  
Experimental Research ◽  
Ultrasonic Vibration Assisted Grinding

Study on Grinding Force in Two-Dimensional Ultrasonic Grinding Nano-Ceramics

2010 ◽  
Vol 42 ◽  
pp. 204-208 ◽  
Author(s):  
Xiang Dong Li ◽  
Quan Cai Wang
Keyword(s):  
Mathematical Model ◽  
Ultrasonic Vibration ◽  
Contact Time ◽  
Reaction Force ◽  
Grinding Force ◽  
Two Dimensional ◽  
Indentation Fracture ◽  
Ultrasonic Grinding ◽  
The Impact ◽  
Ultrasonic Vibration Assisted Grinding

In this paper, the characteristic of grinding force in two-dimensional ultrasonic vibration assisted grinding nano-ceramic was studied by experiment based on indentation fracture mechanics, and mathematical model of grinding force was established. The study shows that grinding force mainly result from the impact of the grains on the workpiece in ultrasonic grinding, and the pulse power is much larger than normal grinding force. The ultrasonic vibration frequency is so high and the contact time of grains with the workpiece is so short that the pulse force will be balanced by reaction force from workpiece. In grinding workpiece was loaded by the periodical stress field, which accelerates the fatigue fracture.

Generation mechanism modeling of surface topography in tangential ultrasonic vibration-assisted grinding with green silicon carbide abrasive wheel

2021 ◽  
pp. 095440542110406
Author(s):  
Yutong Qiu ◽  
Jingfei Yin ◽  
Yang Cao ◽  
Wenfeng Ding
Keyword(s):  
Surface Roughness ◽  
Surface Topography ◽  
Ultrasonic Vibration ◽  
Generation Mechanism ◽  
Surface Generation ◽  
Depth Of Cut ◽  
Abrasive Wheel ◽  
Grinding Parameters ◽  
Conventional Grinding ◽  
Ultrasonic Vibration Assisted Grinding

Tangential ultrasonic vibration-assisted grinding (TUAG) has a wide prospect in machining difficult-to-machine materials. However, the surface generation mechanism in TUAG is not fully recovered. This study proposes an analytical model of the surface topography produced by TUAG. Based on the model, the surface topography and roughness are predicted and experimentally verified. In addition, the influence of the grinding parameters on the surface topography is analyzed. The predicted surface topography well coincides with experimental measurements, and the prediction error in surface roughness Ra by the proposed model is less than 5%. Compared with conventional grinding, TUAG produces a surface with more uniform scratches and surface roughness Ra was reduced by up to 27% with the proper parameters. However, the improvement of surface roughness in TUAG is weakened when grinding speed or depth of cut increases. Moreover, the influence of the ultrasonic vibration amplitude on the surface roughness is not monotonous. With the grinding parameters selected in this study, TUAG with an ultrasonic amplitude of 7.5 μm produces the minimum surface roughness.

scholarly journals Effect to the Surface Composition in Ultrasonic Vibration-Assisted Grinding of BK7 Optical Glass

2020 ◽  
Vol 10 (2) ◽  
pp. 516 ◽  
Author(s):  
Pei Yi Zhao ◽  
Ming Zhou ◽  
Xian Li Liu ◽  
Bin Jiang
Keyword(s):  
Surface Roughness ◽  
Ultrasonic Vibration ◽  
Material Removal ◽  
Surface Composition ◽  
Rotation Speed ◽  
Optical Glass ◽  
Machined Surface ◽  
Spindle Rotation ◽  
Ultrasonic Vibration Assisted Grinding ◽  
Ductile Removal

Because of the changes in cutting conditions and ultrasonic vibration status, the proportion of multiple material removal modes are of uncertainty and complexity in ultrasonic vibration-assisted grinding of optical glass. Knowledge of the effect of machined surface composition is the basis for better understanding the influence mechanisms of surface roughness, and also is the key to control the surface composition and surface quality. In the present work, 32 sets of experiments of ultrasonic vibration-assisted grinding of BK7 optical glass were carried out, the machined surface morphologies were observed, and the influence law of machining parameters on the proportion of different material removal was investigated. Based on the above research, the effect of surface composition was briefly summarized. The results indicated that the increasing of spindle rotation speed, the decreasing of feed rate and grinding depth can improve the proportion of ductile removal. The introduction of ultrasonic vibration can highly restrain the powdering removal, and increase the proportion of ductile removal. Grinding depth has a dominant positive effect on the surface roughness, whereas the spindle rotation speed and ultrasonic amplitude both have negative effect, which was caused by the reduction of brittle fracture removal.

Sign in / Sign up

Export Citation Format

Share Document