Experimental investigation of multi-wall carbon nanotube added epoxy resin on the EDM performance of epoxy/carbon fiber/MWCNT hybrid composites

2021 ◽  
Author(s):  
Ali Yazdanfar ◽  
Hamzeh Shahrajabian
Keyword(s):  
Experimental Investigation ◽  
Carbon Nanotube ◽  
Carbon Fiber ◽  
Epoxy Resin ◽  
Hybrid Composites ◽  
Multi Wall Carbon Nanotube

scholarly journals CARBON NANOTUBE FILM INTERLAYER TOUGHENED CARBON FIBER REINFORCED EPOXY RESIN HYBRID COMPOSITES

2013 ◽  
Vol 013 (10) ◽  
pp. 1334-1340
Author(s):  
Liu Ganf ◽  
Hu Xiao-lan ◽  
Zhang Peng ◽  
Yu Rong-lu ◽  
Bao Jian-wen ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Carbon Fiber ◽  
Epoxy Resin ◽  
Hybrid Composites ◽  
Fiber Reinforced ◽  
Carbon Nanotube Film ◽  
Carbon Fiber Reinforced

Carbon Fiber/Carbon Nanotube Buckypaper Interply Hybrid Composites: Manufacturing Process and Tensile Properties

2015 ◽  
Vol 17 (10) ◽  
pp. 1442-1453 ◽  
Author(s):  
Shaokai Wang ◽  
Rebekah Downes ◽  
Charles Young ◽  
David Haldane ◽  
Ayou Hao ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Carbon Fiber ◽  
Tensile Properties ◽  
Manufacturing Process ◽  
Hybrid Composites ◽  
Composites Manufacturing

Microstructure and Mechanical Property of Carbon Nanotube and Continuous Carbon Fiber Reinforced Epoxy Resin Matrix Composites

2006 ◽  
Vol 11-12 ◽  
pp. 517-520 ◽  
Author(s):  
Dong Lin Zhao ◽  
Ren Hai Qiao ◽  
Cheng Zhong Wang ◽  
Zeng Min Shen
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Carbon Fiber ◽  
Flexural Strength ◽  
Epoxy Resin ◽  
Resin Matrix ◽  
Internal Diameter ◽  
Matrix Composites ◽  
Epoxy Resin Matrix ◽  
Continuous Carbon Fiber

The carbon nanotubes (CNTs) were prepared by catalytic decompose of benzene using floating transition method at 1100-1200°C. Benzene was used as carbon source and ferrocene as catalyst with thiophene. The carbon nanotubes are straight with diameter 20-50 nm, internal diameter 10-30 nm and length 50-1000 μm. The carbon nanotube and continuous carbon fiber (T300) reinforced unidirectional epoxy resin matrix composites was fabricated. The volune fraction of continuous carbon fiber (first filler) in the composites without second filler (carbon nanotube) was 60%. The mechanical properties of the composites were investigated under bending, shear, and impact loading. The flexural strength and modulus of the composites increased firstly and then decreased with the increasing of carbon nanotube contents in epoxy resin matrix. The flexural strength of the composites reached the maximum value of 1780 MPa when the weight percent of carbon nanotube in epoxy resin matrix was 3%.

Hybrid effect of carbon nanotube film and ultrathin carbon fiber prepreg composites

2016 ◽  
Vol 36 (6) ◽  
pp. 452-463 ◽  
Author(s):  
Jiao Pan ◽  
Min Li ◽  
Shaokai Wang ◽  
Yizhuo Gu ◽  
Qingwen Li ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Carbon Fiber ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Chemical Vapor ◽  
Interfacial Bonding ◽  
Damping Capacity ◽  
Failure Behavior ◽  
Hybrid Effect ◽  
Carbon Nanotube Film

This paper successfully interlaced floating catalyst chemical vapor deposition-grown carbon nanotube film and ultrathin carbon fiber prepreg to achieve strong and flexible carbon nanotube/carbon fiber hybrid composites with high carbon nanotube loading. Epoxidation was also introduced to improve interlaminar interfacial bonding. It was found that pristine carbon nanotube film/carbon fiber interply hybrid composite (carbon fiber/carbon nanotube/carbon fiber) showed sudden and brittle failure, while epoxidation caused a gradual failure behavior. Hybrid effect analysis suggested that the improved tensile performance and synergistic effect of epoxidized carbon nanotube film/carbon fiber hybrid composite were attributed to good load transfer and suppressed delamination induced by improved interfacial bonding. In addition carbon fiber/carbon nanotube/carbon fiber manifested excellent damping capacity with the maximum loss factor of 0.13. The in-plane electrical conductivity of composite with global carbon nanotube content of 21 wt% increased to the same order of magnitude as carbon nanotube film composite. The excellent mechanical, damping, and electrical properties demonstrated great potential for both structural and multifunctional applications of the resultant hybrid composites.

Sign in / Sign up

Export Citation Format

Share Document