scholarly journals Integration and control of lithium-ion BESSs for active network management in smart grids: Sundom smart grid backup feeding case

Author(s):  
Chethan Parthasarathy ◽  
Hossein Hafezi ◽  
Hannu Laaksonen

AbstractLithium-ion battery energy storage systems (Li-ion BESS), due to their capability in providing both active and reactive power services, act as a bridging technology for efficient implementation of active network management (ANM) schemes for land-based grid applications. Due to higher integration of intermittent renewable energy sources in the distribution system, transient instability may induce power quality issues, mainly in terms of voltage fluctuations. In such situations, ANM schemes in the power network are a possible solution to maintain operation limits defined by grid codes. However, to implement ANM schemes effectively, integration and control of highly flexible Li-ion BESS play an important role, considering their performance characteristics and economics. Hence, in this paper, an energy management system (EMS) has been developed for implementing the ANM scheme, particularly focusing on the integration design of Li-ion BESS and the controllers managing them. Developed ANM scheme has been utilized to mitigate MV network issues (i.e. voltage stability and adherence to reactive power window). The efficiency of Li-ion BESS integration methodology, performance of the EMS controllers to implement ANM scheme and the effect of such ANM schemes on integration of Li-ion BESS, i.e. control of its grid-side converter (considering operation states and characteristics of the Li-ion BESS) and their coordination with the grid side controllers have been validated by means of simulation studies in the Sundom smart grid network, Vaasa, Finland.

2020 ◽  
pp. 28-37
Author(s):  
Oleksandra V. Kubatko ◽  
Diana O. Yaryomenko ◽  
Mykola O. Kharchenko ◽  
Ismail Y. A. Almashaqbeh

Interruptions in electricity supply may have a series of failures that can affect banking, telecommunications, traffic, and safety sectors. Due to the two-way interactive abilities, Smart Grid allows consumers to automatically redirect on failure, or shut down of the equipment. Smart Grid technologies are the costly ones; however, due to the mitigation of possible problems, they are economically sound. Smart grids can't operate without smart meters, which may easily transmit real-time power consumption data to energy data centers, helping the consumer to make effective decisions about how much energy to use and at what time of day. Smart Grid meters do allow the consumer to track and reduce energy consumption bills during peak hours and increase the corresponding consumption during minimum hours. At a higher level of management (e.g., on the level of separate region or country), the Smart Grid distribution system operators have the opportunity to increase the reliability of power supply primarily by detecting or preventing emergencies. Ukraine's energy system is currently outdated and cannot withstand current loads. High levels of wear of the main and auxiliary equipment of the power system and uneven load distribution in the network often lead to emergencies and power outages. The Smart Grid achievements and energy sustainability are also related to the energy trilemma, which consists of key core dimensions– Energy Security, Energy Equity, and Environmental Sustainability. To be competitive in the world energy market, the country has to organize efficiently the cooperation of public/private actors, governments, economic and social agents, environmental issues, and individual consumer behaviors. Ukraine gained 61 positions out of 128 countries in a list in 2019 on the energy trilemma index. In general, Ukraine has a higher than average energy security position and lower than average energy equity, and environmental sustainability positions. Given the fact that the number of renewable energy sources is measured in hundreds and thousands, network management is complicated and requires a Smart Grid rapid response. Keywords: economic development, Smart Grid, electricity supply, economic and environmental efficiency.


2021 ◽  
pp. 0309524X2110241
Author(s):  
Nindra Sekhar ◽  
Natarajan Kumaresan

To overcome the difficulties of extending the main power grid to isolated locations, this paper proposes the local installation of a combination of three renewable energy sources, namely, a wind driven DFIG, a solar PV unit, a biogas driven squirrel-cage induction generator (SCIG), and an energy storage battery system. In this configuration one bi-directional SPWM inverter at the rotor side of the DFIG controls the voltage and frequency, to maintain them constant on its stator side, which feeds the load. The PV-battery also supplies the load, through another inverter and a hysteresis controller. Appropriately adding a capacitor bank and a DSTATCOM has also been considered, to share the reactive power requirement of the system. Performance of various modes of operation of this coordinated scheme has been studied through simulation. All the results and relevant waveforms are presented and discussed to validate the successful working of the proposed system.


2021 ◽  
Vol 233 ◽  
pp. 01025
Author(s):  
Yingfeng Zhu ◽  
Xiaosu Xie ◽  
Dong Yang ◽  
Song Gao ◽  
Weichao Zhang ◽  
...  

Doubly fed induction generator (DFIG) wind power generation system is widely used in wind farm all over the world. Reactive power can be generated both in grid-side converter and generator-side converter of DFIG. In this paper, working principle and control method of DFIG are introduced, and the reactive power limit of DFIG is derived, finally reactive power regulation is simulated in Simulink.


Energies ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1630 ◽  
Author(s):  
Luis Hernández-Callejo

New technological advances based on software, hardware and new materials must be implemented in smart grids. In addition, these advanced electrical grids must incorporate elements of artificial intelligence. Advances in software development must be complemented with the development of new hardware (power electronics and active distribution among others). The aforementioned must rely on the development of new materials and sensors, which should be integrated into the smart grid. Therefore, the four areas of research based on the technologies are: Operation and Control, Maintenance and Lifespan Management, Grid Planning and Design, and Metering. The review presents the algorithms, materials, devices and others paradigms applied to smart grids, classifying the works according to the four areas of research. This review has focused on the four fundamental pillars of smart grids, on the one hand, the need for more efficient operation and control, followed by advanced maintenance management, to continue planning and designing the new grids, and for conclude with the advanced measurement. As you will see in the article, new devices, new techniques, and future scenarios will make possible the transition from the current grid to the future smart grid.


2013 ◽  
Vol 373-375 ◽  
pp. 1287-1293
Author(s):  
Jian Wei Liang ◽  
Tao Wang

The paper is based on PSCAD/EMTDC. The basic structure and operation principle of DFIG are analyzed and the mathematical model of DFIG is established, based on which the control system of rotor-side and grid-side converters is set up. The stator flux-oriented vector control is adopted for rotor-side converter. The no-load grid connection is realized before cutting in and control strategy is switched after grid connection successfully. DFIG can meet grid connection condition quickly with the control strategy and is connected to grid with no current shock nearly. The output of active and reactive power can be regulated respectively.


2013 ◽  
Vol 448-453 ◽  
pp. 2191-2194
Author(s):  
Lei Zhou ◽  
Hong Da Liu ◽  
Ming Jie Chen ◽  
Nai Jun Shen

On the basis of analyzing the synthesis application of p-q (instantaneous reactive power) theory and unit vector template, a multi-functional grid-connected inverter (MFGCI) with auxiliary services on power quality enhancement in micro-grid (MG) is presented. The novel control strategy for achieving maximum benefits from these MFGCI when installed in AC MG access to 3-phase 4-wire distribution systems by isolated transformer at the point of common coupling (PCC). This kind of inverter can not only deliver the power generation of renewable energy sources (RESs), but also can perform as active power filter (APF) at their PCC as well as can improve the efficiency of inverter and decrease the hardware investment. Finally, both feasibility and effectiveness of this new topologies and control strategies of MFGCI are verified by PSCAD/EMTDC.


Author(s):  
Yahia M. Esmail ◽  
Ali H. Kasem Alaboudy ◽  
M. S. Hassan ◽  
Gamal M. Dousoky

Power quality (PQ) assurance is a vital part of electrical distribution networks. There are many advantages and benefits of improving PQ, especially in the modern/smart grid. Smart grid (SG) has a lot of complicated and sensitive electrical components (non-linear loads) in addition to renewable energy systems (wind-solar) that may also be a source of PQ disturbances. PQ problems harm personal life and national production. Static synchronous compensator (STATCOM) and unified power quality conditioner (UPQC) are among the fastest response flexible alternating current transmission systems (FACTS) installed in smart grids to mitigate power quality disturbances such as voltage fluctuations, sag, swell, and harmonics. In this research, STATCOM and UPQC are designed and simulated in MATLAB/Simulink to overcome PQ-related disruptions in smart grids. Accordingly, the differences between the proposed two solutions are highlighted across this research and renewable energy sources' reliability during faults. Therefore, the reader will be able to choose the appropriate FACTS devices. This study emphasizes the extent of the smart grid need for the FACTS. As per the given results of this study, STATCOM and UPQC have shown exemplary performance in the PQ improvement investigations conducted in the context of smart/modern grids.


Energies ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 242 ◽  
Author(s):  
Dionysios Pramangioulis ◽  
Konstantinos Atsonios ◽  
Nikos Nikolopoulos ◽  
Dimitrios Rakopoulos ◽  
Panagiotis Grammelis ◽  
...  

There is a growing interest over the last decades in the field of autonomous island grids that is driven mainly by climate reasons. The common objective among the members of the European Union (EU) is the increase of Renewable Energy Sources (RES) penetration in the energy mixture, as well as turning the grid into a smart grid. Consequently, more and more state-of-the-art solutions are being proposed for the electricity generation and the optimization of the energy system management, taking advantage of innovations in all energy related sectors. The evaluation of all available solutions requires quantitative assessment, through the adoption of representative Key Performance Indicators (KPIs) for the projects that are related to smart grid development in isolated energy systems, providing the relevant stakeholders with a useful comparison among the proposed solutions. The evaluation approach that is described in this paper emphasizes the role of the various stakeholder groups who face the proposed solutions by different points of view. Apart from the domains of interest that are also observed in previous approaches, the proposed list also contains a set of legal KPIs, since the regulatory framework can either represent a serious barrier or grant a strong incentive for the implementation of state-of-the-art energy technology and grid management solutions in different countries.


Sign in / Sign up

Export Citation Format

Share Document