scholarly journals Anisotropic Wellbore Stability Analysis: Impact on Failure Prediction

2020 ◽  
Author(s):  
Michinori Asaka ◽  
Rune Martin Holt
Keyword(s):  
Stability Analysis ◽  
Pore Pressure ◽  
Elastic Anisotropy ◽  
Wellbore Stability ◽  
Practical Implementation ◽  
Borehole Stability ◽  
Gas Field ◽  
Drilling Operations ◽  
Failure Predictions ◽  
The Impact

Abstract Shale formations are the main source of borehole stability problems during drilling operations. Suboptimal predictions of borehole failure may partly be caused by neglecting the anisotropic nature of shales: Conventional wellbore stability analysis is based on borehole stresses computed from isotropic linear elasticity (Kirsch solution) with the assumption of no induced pore pressure. This is very convenient for a practical implementation but does not always work for shales. Here, anisotropic wellbore stability analysis was performed targeting an offshore gas field to investigate in particular the impact of elastic anisotropy on borehole failure predictions. Stress concentration around a circular borehole in anisotropic shale was calculated by the Amadei solutions, and induced pore pressure was obtained from the Skempton parameters based on anisotropic poroelasticity. Borehole failure regions and modes were then predicted using the effective stresses and those are apparently consistent with observations. A comparison with the conventional approach suggests the importance of accounting for elastic anisotropy: Predicted failure regions, modes, and also the associated mud weight limits can be completely different. This observation may have significant implications for other fields since shale often show strong elastic anisotropy.

Impact of High Resolution 3D Geomechanics on Well Optimization in the Southern Gulf of Suez, Egypt

2021 ◽  
Author(s):  
Mohamed Elkhawaga ◽  
Wael A. Elghaney ◽  
Rajarajan Naidu ◽  
Assef Hussen ◽  
Ramy Rafaat ◽  
...  
Keyword(s):  
High Resolution ◽  
Pore Pressure ◽  
Cost Optimization ◽  
Oil Field ◽  
Wellbore Stability ◽  
Gulf Of Suez ◽  
Geomechanical Model ◽  
3D Geomechanical Model ◽  
The Cost ◽  
The Impact

Abstract Optimizing the number of casing strings has a direct impact on cost of drilling a well. The objective of the case study presented in this paper is the demonstration of reducing cost through integration of data. This paper shows the impact of high-resolution 3D geomechanical modeling on well cost optimization for the GS327 Oil field. The field is located in the Sothern Gulf of Suez basin and has been developed by 20 wells The conventional casing design in the field included three sections. In this mature field, especially with the challenge of reducing production cost, it is imperative to look for opportunites to optimize cost in drilling new wells to sustain ptoduction. 3D geomechanics is crucial for such cases in order to optimize the cost per barrel at the same time help to drill new wells safely. An old wellbore stability study did not support the decision-maker to merge any hole sections. However, there was not geomechanics-related problems recorded during the drilling the drilling of different mud weights. In this study, a 3D geomechanical model was developed and the new mud weight calculations positively affected the casing design for two new wells. The cost optimization will be useful for any future wells to be drilled in this area. This study documents how a 3D geomechanical model helped in the successful delivery of objectives (guided by an understanding of pore pressure and rock properties) through revision of mud weight window calculations that helped in optimizing the casing design and eliminate the need for an intermediate casing. This study reveals that the new calculated pore pressure in the GS327 field is predominantly hydrostatic with a minor decline in the reservoir pressure. In addition, rock strength of the shale is moderately high and nearly homogeneous, which helped in achieving a new casing design for the last two drilled wells in the field.

Wellbore Geomechanics of Extended Drilling Margin and Engineered Lost-Circulation Solutions

SPE Journal ◽  
2017 ◽  
Vol 22 (04) ◽  
pp. 1178-1188 ◽  
Author(s):  
Amin Mehrabian ◽  
Younane Abousleiman
Keyword(s):  
Mechanical Properties ◽  
Stability Analysis ◽  
Analytical Approach ◽  
Wellbore Stability ◽  
Tensile Failure ◽  
Mechanical Interaction ◽  
Lost Circulation ◽  
Drilling Operations ◽  
Secondary Fractures ◽  
Lost Circulation Materials

Summary Wellbore tensile failure is a known consequence of drilling with excessive mud weight, which can cause costly events of lost circulation. Despite the successful use of lost-circulation materials (LCMs) in treating lost-circulation events of the drilling operations, extensions of wellbore-stability models to the case of a fractured and LCM-treated wellbore have not been published. This paper presents an extension of the conventional wellbore-stability analysis to such circumstances. The proposed wellbore geomechanics solution revisits the criteria for breakdown of a fractured wellbore to identify an extended margin for the equivalent circulation density (ECD) of drilling. An analytical approach is taken to solve for the related multiscale and nonlinear problem of the three-way mechanical interaction between the wellbore, fracture wings, and LCM aggregate. The criteria for unstable propagation of existing near-wellbore fractures, together with those for initiating secondary fractures from the wellbore, are obtained. Results suggest that, in many circumstances, the occurrence of both incidents can be prevented, if the LCM blend is properly engineered to recover certain depositional and mechanical properties at downhole conditions. Under such optimal design conditions, the maximum ECD to which the breakdown limit of a permeable formation could be enhanced is predicted.

Mechanical-Thermal-Chemical Coupled Research of Wellbore Stability in Jabung Oil Field, Indonesia

2011 ◽  
Vol 402 ◽  
pp. 709-714 ◽  
Author(s):  
Pei Yang ◽  
Mian Chen ◽  
Yan Jin ◽  
Bing Hou ◽  
Kang Qiu ◽  
...  
Keyword(s):  
Stress Distribution ◽  
Drilling Fluid ◽  
Great Influence ◽  
Chemical Properties ◽  
Oil Field ◽  
Wellbore Stability ◽  
Additional Stress ◽  
Borehole Stability ◽  
Well Trajectory ◽  
The Impact

The Jabung oilfield in Indonesia is characterized by complex geological structural movement, large tectonic stress and high temperature gradient. Accidents such as borehole collapse and sticking were frequently encountered when drilling shale formations, which often result in serious damage. In this paper, a series of experiments were conducted to evaluate the performance of shale in drilling fluid, including linear expansion rate evaluation tests and rolling recovery evaluation tests. Also X-ray diffraction was used to analyze the mineral composition of shale. The mechanical parameters of shale were obtained through statistical analysis. By using ABAQUS software, the temperature difference induced by thermal stress distribution was analyzed. After that, the borehole stress distribution was determined by coupling the additional stress with in-situ stress. Finally, based on borehole stability mechanical models, the effects of well trajectory on borehole stability were analyzed. We found that the chemical properties of drilling fluid, wellbore trajectory and temperature has a great influence on wellbore stability, and the impact of temperature changes and of well trajectory are the largest factor.

Wellbore Stability in Layered Rocks: A Comparative Study of Strength Criteria

2020 ◽  
Vol 142 (6) ◽  
Author(s):  
Xiangchao Shi ◽  
Xiao Zhuo ◽  
Yue Xiao ◽  
Boyun Guo ◽  
Cheng Zhu ◽  
...  
Keyword(s):  
Stability Analysis ◽  
Good Choice ◽  
Wellbore Stability ◽  
Gas Field ◽  
Well Drilling ◽  
Shale Formations ◽  
Single Plane ◽  
Collapse Pressure ◽  
Bedding Planes ◽  
Laminated Structures

Abstract Wellbore instability is a critical issue restricting efficient well drilling and successful development of oil and gas field. Most instability problems originate from shale formations because of their distinct laminated structures that cause significant anisotropy and moderate to high clay contents that are prone to shrinkage and swelling. To account for these influences on the mechanical responses of shales, this study aims to identify an appropriate strength criterion for stability analyses. Two anisotropic criteria including single plane of weakness and the modified Hoek–Brown criteria were compared to evaluate their suitability in characterizing the anisotropic strength of layered rocks including shale, schist, and slate under different confining pressures. Comparative case studies indicated that the single plane of weakness criterion overestimates the strength of layered rocks at some orientation angles. The modified Hoek–Brown criterion can fit well with the experimental data of layered rocks. Moreover, wellbore stability analysis models for shale gas wells were built, respectively, for each criterion and applied to in situ scenarios. The single plane of weakness and modified Hoek–Brown criteria provide similar results of collapse pressure, and the shale failure is mainly determined by the bedding plane. This further validates that the modified Hoek–Brown criterion is a good choice for wellbore stability analysis in shale formations with bedding planes. This study shows the potential of using the modified Hoek–Brown criterion to enhance the safety and efficiency of well drilling and operation in shale formations.

The Essence of Horizontal Drilling Challenges in Depleted Reservoirs

2021 ◽  
Author(s):  
Rida Mohamed Elgaddafi ◽  
Victor Soriano ◽  
Ramadan Ahmed ◽  
Samuel Osisanya
Keyword(s):  
Pore Pressure ◽  
Horizontal Well ◽  
New Technology ◽  
Horizontal Wells ◽  
Stability Loss ◽  
Wellbore Stability ◽  
Planning Stage ◽  
Horizontal Drilling ◽  
Infill Drilling ◽  
Drilling Operations

Abstract Horizontal well technology is one of the major improvements in reservoir stimulation. Planning and execution are the key elements to drill horizontal wells successfully, especially through depleted formations. As the reservoir has been producing for a long time, pore pressure declines, resulting in weakening hydrocarbon-bearing rocks. Drilling issues such as wellbore stability, loss circulation, differential sticking, formation damage remarkably influenced by the pore pressure decline, increasing the risk of losing part or even all the horizontal interval. This paper presents an extensive review of the potential issues and solutions associated with drilling horizontal wells in depleted reservoirs. After giving an overview of the depleted reservoir characteristics, the paper systematically addresses the major challenges that influence drilling operations in depleted reservoirs and suggests solutions to avoid uncontrolled risks. Then, the paper evaluates several real infill drilling operations through depleted reservoirs, which were drilled in different oilfields. The economic aspect associated with potential risks for drilling a horizontal well in depleted reservoirs is also discussed. The most updated research and development findings for infill drilling are summarized in the article. It is recommended to use wellbore strengthening techniques while drilling a horizontal well through highly depleted formations. This will allow using higher mud weight to control unstable shales while drilling through the production zone. Managed Pressure Drilling should be considered as the last option for highly depleted formations because it will require a greater level of investment which is not going to have a superior rate of return due to the lack of high deliverability of the reservoir. Using rotary steerable systems is favored to reduce risks related to drilling through depleted formations. Precise analysis of different drilling programs allows the drilling team to introduce new technology to reduce cost, improve drilling efficiency and maximize profit. It is the responsibility of the drilling engineer to evaluate different scenarios with all the precautions needed during the planning stage to avoid unexpected issues. The present market conditions and the advancement in technologies for drilling horizontal wells increase the feasibility of producing the depleted reservoirs economically. This paper highlights the challenges in drilling horizontal wells in highly depleted reservoirs and provides means for successfully drilling those wells to reduce risks while drilling

Transient Coupling of Swab/Surge Pressure and In-Situ Stress for Wellbore-Stability Evaluation During Tripping

SPE Journal ◽  
2018 ◽  
Vol 23 (04) ◽  
pp. 1019-1038 ◽  
Author(s):  
Feifei Zhang ◽  
Yongfeng Kang ◽  
Zhaoyang Wang ◽  
Stefan Miska ◽  
Mengjiao Yu ◽  
...  
Keyword(s):  
Stability Analysis ◽  
Pore Pressure ◽  
In Situ Stress ◽  
Wellbore Stability ◽  
Pressure Oscillations ◽  
Deepwater Drilling ◽  
Wellbore Pressure ◽  
Operating Window ◽  
Safe Operating

Summary This paper identifies wellbore-stability concerns caused by transient swab/surge pressures during deepwater-drilling tripping and reaming operations. Wellbore-stability analysis that couples transient swab/surge wellbore-pressure oscillations and in-situ-stress field oscillations in the near-wellbore (NWB) zone in deepwater drilling is presented. A transient swab/surge model is developed by considering drillstring components, wellbore structure, formation elasticity, pipe elasticity, fluid compressibility, fluid rheology, and the flow between wellbore and formation. Real-time pressure oscillations during tripping/reaming are obtained. On the basis of geomechanical principles, in-situ stress around the wellbore is calculated by coupling transient wellbore pressure with swab/surge pressure, pore pressure, and original formation-stress status to perform wellbore-stability analysis. By applying the breakout failure and wellbore-fracture failure in the analysis, a work flow is proposed to obtain the safe-operating window for tripping and reaming processes. On the basis of this study, it is determined that the safe drilling-operation window for wellbore stability consists of more than just fluid density. The oscillation magnitude of transient wellbore pressure can be larger than the frictional pressure loss during the normal-circulation process. With the effect of swab/surge pressure, the safe-operating window can become narrower than expected. The induced pore pressure decreases monotonically as the radial distance increases, and it is limited only to the NWB region and dissipates within one to two hole diameters away from the wellbore. This study provides insight into the integration of wellbore-stability analysis and transient swab/surge-pressure analysis, which is discussed rarely in the literature. It indicates that tripping-induced transient-stress and pore-pressure changes can place important impacts on the effective-stress clouds for the NWB region, which affect the wellbore-stability status significantly.

Wellbore-Stability Analysis by Integrating a Modified Hoek-Brown Failure Criterion With Dual-Porochemoelectroelastic Theory (includes associated erratum)

SPE Journal ◽  
2019 ◽  
Vol 24 (05) ◽  
pp. 1957-1981 ◽  
Author(s):  
Chao Liu ◽  
Yanhui Han ◽  
Hui–Hai Liu ◽  
Younane N. Abousleiman
Keyword(s):  
Stability Analysis ◽  
Pore Pressure ◽  
Failure Criterion ◽  
Rock Strength ◽  
Chemical Potential ◽  
Wellbore Stability ◽  
Natural Fracture ◽  
Analysis Tool ◽  
Drilling Mud

Summary When drilling through naturally fractured formations, the existence of natural fractures affects the fluid diffusion and stress distribution around the wellbore and induces degradation of rock strength. For chemically active formations, such as shale, the chemical–potential difference between the drilling mud and the shale–clay matrix further complicates the nonmonotonic coupled pore–pressure processes in and around the wellbore. In this work, we apply a recently formulated theory of dual–porosity/permeability porochemoelectroelasticity to predict the time evolution of mud–weight windows, while calculating stresses and pore pressure around an inclined wellbore drilled in a fractured shale formation. The effects of natural–fracture geometric and spatial distributions coupled with the chemical activity are considered in the wellbore–stability analysis. To account for the degrading effect of the fractured shale matrix on the bulk rock strength, a modified Hoek–Brown (MHB) criterion is developed to more closely describe the in–situ state of stress effects on the compressive shearing strength at great depth. Compared with the original Hoek–Brown (HB) failure criterion, the MHB criterion considers the influence of the intermediate principal stress and thus shows better agreement with true–triaxial data for various rocks at varying stress levels. The MHB criterion converges to the original HB criterion when the confining in–situ stresses are equal. Two field case studies indicate that this novel integrative methodology is capable of predicting the operational drilling–mud–weight windows used in these two cases. Another advantage of this newly developed technique is that it can be used as a back–analysis tool to estimate the fracture–matrix permeability from field operational data.

Modeling Time-Dependent Pore Pressure Due to Capillary and Chemical Potential Effects and Resulting Wellbore Stability in Shales

2003 ◽  
Vol 125 (3) ◽  
pp. 169-176 ◽  
Author(s):  
M. K. Rahman ◽  
Zhixi Chen ◽  
Sheik S. Rahman
Keyword(s):  
Pore Pressure ◽  
Chemical Potential ◽  
Normal Fault ◽  
Wellbore Stability ◽  
Time Dependent ◽  
Analytical Models ◽  
Analysis Model ◽  
Stress Regime ◽  
Dependent Change ◽  
Drilling Operations

During drilling operations, the mud filtrate interacts with the pore fluid around the wellbore and changes pore pressure by capillary and chemical potential effects. Thus the change in pore pressure around borehole becomes time-dependent, particularly in extremely low permeability shaley formations. In this paper, the change in pore pressure due to capillary and chemical potential effects are investigated experimentally. Analytical models are also developed based on the experimental results. A wellbore stability analysis model incorporating the time-dependent change in pore pressure is applied to a vertical well in a shale formation under normal fault stress regime.

Sign in / Sign up

Export Citation Format

Share Document