Biological X-ray Microanalysis: The Past, Present Practices, and Future Prospects

2001 ◽  
Vol 7 (2) ◽  
pp. 211-219 ◽  
Author(s):  
Patrick Echlin

Abstract A brief description is given of the events surrounding the development of biological X-ray microanalysis during the last 30 years, with particular emphasis on the contribution made by research workers in Cambridge, UK. There then follows a broad review of some applications of biological X-ray microanalysis. A more detailed consideration is given to the main thrust of current procedures and applications that are, for convenience, considered as four different kinds of samples. Thin frozen dried sections which are analyzed at ambient temperatures in a transmission electron microscope (TEM); semithin frozen dried sections which are analyzed at low temperature in a scanning transmission electron microscope (STEM); thick frozen hydrated sections which are analyzed at low temperature in a scanning electron microscope (SEM), and bulk samples which are analyzed at low temperature in the same type of instrument. A brief outline is given of the advantages and disadvantages of performing low-voltage, low-temperature X-ray microanalysis on frozen hydrated bulk biological material. The article concludes with a consideration of alternative approaches to in situ analysis using either high-energy beams or visible and near-visible photons.

2009 ◽  
Vol 15 (S2) ◽  
pp. 642-643
Author(s):  
M Bolorizadeh ◽  
HF Hess

Extended abstract of a paper presented at Microscopy and Microanalysis 2009 in Richmond, Virginia, USA, July 26 – July 30, 2009


2012 ◽  
Vol 18 (S2) ◽  
pp. 974-975 ◽  
Author(s):  
M. Watanabe ◽  
A. Yasuhara ◽  
E. Okunishi

Extended abstract of a paper presented at Microscopy and Microanalysis 2012 in Phoenix, Arizona, USA, July 29 – August 2, 2012.


Author(s):  
Y. Kondo ◽  
T. Yoshioka ◽  
T. Oikawa ◽  
Y. Kokubo ◽  
M. Kersker

The energy filtered imaging technique has so far been carried out in a scanning transmission electron microscope (STEM) fitted with a sector type energy analyzer. The STEM has a disadvantage of low beam parallelity because it uses a convergent beam, while the conventional transmission electron microscope (CTEM) allows good phase contrast and diffraction contrast to be obtained because of the high parallelity of the beam, and allows also high resolution images to be obtained. The technique to obtain energy filtered CTEM images has thus far been carried out by a Castaing-Henry type filter or an Ω type filter. However, these filters have the disadvantage of lower energy resolution than conventional sector type energy analyzer at the present time. This paper reports energy filtered CTEM images of MgO smoke, obtained using a new scanning CTEM image technique and a high energy resolution sector type energy analyzer which can resolve bulk and surface plasmon energy.


2004 ◽  
Vol 10 (S02) ◽  
pp. 1044-1045 ◽  
Author(s):  
Masami Terauchi

Extended abstract of a paper presented at Microscopy and Microanalysis 2004 in Savannah, Georgia, USA, August 1–5, 2004.


Sign in / Sign up

Export Citation Format

Share Document