Discrete modelling of rock avalanches: sensitivity to block and slope geometries

2015 ◽  
Vol 17 (5) ◽  
pp. 645-666 ◽  
Author(s):  
Guilhem Mollon ◽  
Vincent Richefeu ◽  
Pascal Villard ◽  
Dominique Daudon
Author(s):  
Rime Chehade ◽  
Bastien Chevalier ◽  
Fabian Dedecker ◽  
Pierre Breul ◽  
Jean‑Claude Thouret

Landslides ◽  
2021 ◽  
Author(s):  
B. Cagnoli

AbstractGranular flows of angular rock fragments such as rock avalanches and dense pyroclastic flows are simulated numerically by means of the discrete element method. Since large-scale flows generate stresses that are larger than those generated by small-scale flows, the purpose of these simulations is to understand the effect that the stress level has on flow mobility. The results show that granular flows that slide en mass have a flow mobility that is not influenced by the stress level. On the contrary, the stress level governs flow mobility when granular flow dynamics is affected by clast agitation and collisions. This second case occurs on a relatively rougher subsurface where an increase of the stress level causes an increase of flow mobility. The results show also that as the stress level increases, the effect that an increase of flow volume has on flow mobility switches sign from causing a decrease of mobility at low stress level to causing an increase of mobility at high stress level. This latter volume effect corresponds to the famous Heim’s mobility increase with the increase of the volume of large rock avalanches detected so far only in the field and for this reason considered inexplicable without resorting to extraordinary mechanisms. Granular flow dynamics is described in terms of dimensionless scaling parameters in three different granular flow regimes. This paper illustrates for each regime the functional relationship of flow mobility with stress level, flow volume, grain size, channel width, and basal friction.


CONCREEP 10 ◽  
2015 ◽  
Author(s):  
G. Pijaudier-Cabot ◽  
F. Khaddour ◽  
D. Grégoire ◽  
L. Ecay
Keyword(s):  

2016 ◽  
Vol 49 (6) ◽  
pp. 2353-2372 ◽  
Author(s):  
D. Manzanal ◽  
V. Drempetic ◽  
B. Haddad ◽  
M. Pastor ◽  
M. Martin Stickle ◽  
...  

2018 ◽  
Vol 96 ◽  
pp. 189-202 ◽  
Author(s):  
J. Meng ◽  
J. Huang ◽  
S.W. Sloan ◽  
D. Sheng

Author(s):  
H Bartlett ◽  
R Whalley

This paper employs hybrid modelling techniques in the investigation of the dynamic performance of ‘long’ driveshafts, which include a clutch and load, for power transmission purposes. The power transmission system considered is suitable for a wide variety of applications in which the load is coupled directly to the clutch and hence to the ‘long’ driveshaft. Owing to the length of the shaft and relatively pointwise location of the clutch and load, a distributed—lumped (D—L) description of the arrangement is investigated. This enables the behaviour of the dispersed driveline shaft to be ‘adequately’ replicated along with the connecting elements. A discrete modelling approach is adopted and analysis and simulated response characteristics are presented, thereby validating the technique. Existing results on clutch judder are referred to and the interaction between judder and the driveshaft torsional oscillation is commented upon.


2021 ◽  
Author(s):  
Janusz Wasowski ◽  
Maurice McSaveney ◽  
Luca Pisanu ◽  
Vincenzo Del Gaudio ◽  
Yan Li ◽  
...  

<p>Large earthquake-triggered landslides, in particular rock avalanches, can have catastrophic consequences. However, the recognition of slopes prone to such failures remains difficult, because slope-specific seismic response depends on many factors including local topography, landforms, structure and internal geology. We address these issues by exploring the case of a rock avalanche of >3 million m<sup>3</sup> triggered by the 2008 Mw7.9 Wenchuan earthquake in the Longmen Shan range, China. The failure, denominated Yangjia gully rock avalanche, occurred in Beichuan County (Sichuan Province), one of the areas that suffered the highest shaking intensity and death toll caused by co-seismic landsliding. Even though the Wenchuan earthquake produced tens of large (volume >1 million m<sup>3</sup>) rock avalanches, few studies so far have examined the pre-2008 history of the failed slope or reported on the stratigraphic record of mass-movement deposits exposed along local river courses. The presented case of the Yangjia gully rock avalanche shows the importance of such attempts as they provide information on the recurrence of large slope failures and their associated hazards. Our effort stems from recognition, on 2005 satellite imagery, of topography and morphology indicative of a large, apparently pre-historic slope failure and the associated breached landslide dam, both features closely resembling the forms generated in the catastrophic 2008 earthquake. The follow-up reconstruction recognizes an earlier landslide deposit exhumed from beneath the 2008 Yangjia gully rock avalanche by fluvial erosion since May 2008. We infer a seismic trigger also for the pre-2008 rock avalanche based on the following circumstantial evidence: i) the same source area (valley-facing, terminal portion of a flat-topped, elongated mountain ridge) located within one and a half kilometer of the seismically active Beichuan fault; ii) significant directional amplification of ground vibration, sub-parallel to the failed slope direction, detected via ambient noise measurements on the ridge adjacent to the source area of the 2008 rock avalanche and iii) common depositional and textural features of the two landslide deposits. Then, we show how, through consideration of the broader geomorphic and seismo-tectonic contexts, one can gain insight into the spatial and temporal recurrence of catastrophic slope failures  in Beichuan County and elsewhere in the Longmen Shan. This insight, combined with local-scale geologic and geomorphologic knowledge, may guide selection of suspect slopes for reconnaissance, wide-area ambient noise investigation aimed at discriminating their relative susceptibility to co-seismic catastrophic failures. We indicate the feasibility of such investigations through the example of this study, which uses 3-component velocimeters designed to register low amplitude ground vibration.</p>


1990 ◽  
Vol 27 (1) ◽  
pp. 129-144 ◽  
Author(s):  
P. K. Kaiser ◽  
J. V. Simmons

The transport mechanism of some rock avalanches of the Mackenzie Mountains in the Yukon and Northwest Territories of Canada is reassessed on the basis of evidence collected during fieldwork and by comparison with results from numerical simulations of the debris flow mechanism. A new hypothesis of glaciation-related transport is advanced as an alternate explanation of apparently very mobile rock avalanches with anomalous travel distances. By the example of the Avalanche Lake slide, it is demonstrated that the debris was most likely not deposited on the current topography but on valley glacier ice at an elevation of about 400–500 m above the valley bottom. This conclusion is supported by field evidence, an empirical runup relationship, and the results from numerical flow simulations. A qualitative interpretation of other debris deposits suggests that several events in the Mackenzie Mountains can be interpreted in the same manner. Key words: rock avalanches, rock slides, debris transport, debris flow modelling, Mackenzie Mountains, Northwest Territories.


Sign in / Sign up

Export Citation Format

Share Document