Study on the failure mechanism and stability control measures in a large-cutting-height coal mining face with a deep-buried seam

2019 ◽  
Vol 78 (8) ◽  
pp. 6143-6157 ◽  
Author(s):  
De-Zhong Kong ◽  
Zhan-Bo Cheng ◽  
Shang-Shang Zheng
Keyword(s):  
Failure Mechanism ◽  
Coal Mining ◽  
Stability Control ◽  
Control Measures ◽  
Mining Face ◽  
Cutting Height

scholarly journals Stability Analysis of Roadway Groups under Multi-Mining Disturbances

2021 ◽  
Vol 11 (17) ◽  
pp. 7953
Author(s):  
Yuantian Sun ◽  
Ruiyang Bi ◽  
Qingliang Chang ◽  
Reza Taherdangkoo ◽  
Junfei Zhang ◽  
...  
Keyword(s):  
Coal Mining ◽  
Coal Pillar ◽  
Stability Control ◽  
Surrounding Rock ◽  
Key Strata ◽  
Working Face ◽  
Roadway Stability ◽  
Mining Disturbance ◽  
Mining Face ◽  
The Stability

The roadway stability has been regarded as the main challenging issue for safety and productivity of deep underground coal mines, particularly where roadways are affected by coal mining activities. This study investigates the −740 m main roadway in the Jining No. 2 Coal Mine to provide a theoretical basis for the stability control of the main deep roadway affected by disturbances of adjacent working activities. Field surveys, theoretical analyses, and numerical simulations are used to reveal mechanisms of the coal mining disturbance. The field survey shows that the deformation of roadway increases when the work face advances near the roadway group. Long working face mining causes the key strata to collapse based on the key strata theory and then disturbs the adjacent roadway group. When the working face is 100 m away from the stop-mining line, the roadway group is affected by the mining face, and the width roadway protection coal pillar is determined to be about 100 m. Flac3D simulations prove the accuracy of the theoretical result. Through reinforcement and support measures for the main roadway, the overall strength of the surrounding rock is enhanced, the stability of the surrounding rock of the roadway is guaranteed, and the safe production of the mine is maintained.

The Adaptation Analysis of the Fully Mechanized Coal Mining Face of Huopu Mine’s Third Soft Coal Seam

2014 ◽  
Vol 1049-1050 ◽  
pp. 335-338 ◽  
Author(s):  
Fa Quan Liu ◽  
Xue Wen Geng ◽  
Yong Che ◽  
Xiang Cui
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Geological Condition ◽  
Soft Coal ◽  
Working Face ◽  
Mining Face ◽  
Soft Coal Seam ◽  
Working Resistance

To get the maximum coal in front of the working face of the 17# coal seam, we installed a longer beam which is 1.2m in length in the leading end of the original working face supports ZF3000/17/28, and know that working face supports’ setting load and working resistance are lower .We changed the original supports with shield supports ZY3800/15/33 that are adaptable in the geological condition and got the favorable affection.

scholarly journals Movement Laws of Overlying Strata above a Fully Mechanized Coal Mining Face Backfilled with Gangue: A Case Study in Jiulishan Coal Mine in Henan Province, China

2021 ◽  
Vol 2021 ◽  
pp. 1-20
Author(s):  
Zhengkai Yang ◽  
Zhiheng Cheng ◽  
Zhenhua Li ◽  
Chunyuan Li ◽  
Lei Wang ◽  
...  
Keyword(s):  
Coal Mining ◽  
Main Roof ◽  
Surrounding Rock ◽  
Surface Subsidence ◽  
Key Strata ◽  
Key Stratum ◽  
Mining Face ◽  
Failure Depth ◽  
Gangue Backfilling ◽  
Overlying Strata

The aim of this study is to obtain movement laws of overlying strata above a fully mechanized coal mining face backfilled with gangue and solve the problem of surface subsidence during coal mining. This study was carried out based on gangue backfilling mining of Jiulishan Coal Mine (Jiaozuo City, Henan Province, China) from the perspectives of deformation of backfilled gangue under compaction, surrounding rock of a stope, and activities of key strata. The method combining with rock mechanics, viscoelastic mechanics, control theory of rock mass under mining, and numerical simulation was used based on physical and mechanical characteristics of backfilled gangue. On this basis, the research analyzed the temporal-spatial relationships of activities of surrounding rock of the stope, compressive deformation of backfilling body, failure depth of the floor, deformation characteristics of the main roof with laws of surface subsidence. The movement characteristics of overlying strata above the fully mechanized coal mining face backfilled with gangue and the traditional fully mechanized mining face were compared. It is found that, under the same conditions of overlying strata, movement laws of overlying strata are mainly determined by the mining height of coal seams and the heights of a caving zone and a fracture zone are nearly linearly correlated with the mining height. Through analysis based on thin-plate theory and key stratum theory, the location of the main roof of the fully mechanized coal mining face backfilled with gangue in coal seams first bending and sinking due to load of overlying strata was ascertained. Then, it was determined that there are two key strata and the main roof belongs to the inferior key stratum. By using the established mechanical model for the main roof of the fully mechanized coal mining face backfilled with gangue and the calculation formula for the maximum deflection of the main roof, this research presented the conditions for breaking of the main roof. In addition, based on the theoretical analysis, it is concluded that the main roof of the fully mechanized coal mining face backfilled with gangue does not break, but bends. The numerical simulation results demonstrate that, with the continuous increase of strength of backfilled gangue, the stress concentration degree of surrounding rock reduces constantly, so does its decrease amplitude. Moreover, the compressive deformation of backfilling, failure depth of the floor, and bending and subsidence of the main roof continuously decrease and tend to be stable. The mechanical properties of backfilling materials determine effects of gangue backfilling in controlling surface subsidence. Gangue backfilling can effectively control movement of overlying strata and surface subsidence tends to be stable with the increase of elastic modulus of gangue.

Research on Rotation Mining with Large Angle for Unequal and Fully Mechanized Mining Face

2012 ◽  
Vol 524-527 ◽  
pp. 673-676
Author(s):  
Zhi Tao Ma ◽  
Sai Jiang Liang ◽  
Yong Ping Wang
Keyword(s):  
Sustainable Development ◽  
Coal Mining ◽  
Renewable Resources ◽  
Large Angle ◽  
Engineering Practice ◽  
Mining Method ◽  
Coal Resources ◽  
Important Measure ◽  
Coal Resource ◽  
Mining Face

Coal is one of the non-renewable resources, and in our country at present also is the main source of energy. It is very important to improve the coal mining rate, to exploit and to use the coal reasonably. Saving coal resource is an important measure for our coal industries sustainable development. Because large amounts of coal under complex conditions caused by fully mechanized mining can not be mined, the rotation mining with large angle for unequal and fully mechanized mining face and its design and main parameters are introduced in this article based on an engineering practice. Using this mining method, the coal under complex condition can be mined as much as possible. It is helpful for us to improve coal mining rate and to economize coal resources.

Sign in / Sign up

Export Citation Format

Share Document