Feasibility analysis on 1300 fully-mechanized coal mining face of Jining No

2011 ◽  
pp. 987-992
Author(s):  
H Wang ◽  
H Ji
2014 ◽  
Vol 1049-1050 ◽  
pp. 335-338 ◽  
Author(s):  
Fa Quan Liu ◽  
Xue Wen Geng ◽  
Yong Che ◽  
Xiang Cui

To get the maximum coal in front of the working face of the 17# coal seam, we installed a longer beam which is 1.2m in length in the leading end of the original working face supports ZF3000/17/28, and know that working face supports’ setting load and working resistance are lower .We changed the original supports with shield supports ZY3800/15/33 that are adaptable in the geological condition and got the favorable affection.


2021 ◽  
Vol 2021 ◽  
pp. 1-20
Author(s):  
Zhengkai Yang ◽  
Zhiheng Cheng ◽  
Zhenhua Li ◽  
Chunyuan Li ◽  
Lei Wang ◽  
...  

The aim of this study is to obtain movement laws of overlying strata above a fully mechanized coal mining face backfilled with gangue and solve the problem of surface subsidence during coal mining. This study was carried out based on gangue backfilling mining of Jiulishan Coal Mine (Jiaozuo City, Henan Province, China) from the perspectives of deformation of backfilled gangue under compaction, surrounding rock of a stope, and activities of key strata. The method combining with rock mechanics, viscoelastic mechanics, control theory of rock mass under mining, and numerical simulation was used based on physical and mechanical characteristics of backfilled gangue. On this basis, the research analyzed the temporal-spatial relationships of activities of surrounding rock of the stope, compressive deformation of backfilling body, failure depth of the floor, deformation characteristics of the main roof with laws of surface subsidence. The movement characteristics of overlying strata above the fully mechanized coal mining face backfilled with gangue and the traditional fully mechanized mining face were compared. It is found that, under the same conditions of overlying strata, movement laws of overlying strata are mainly determined by the mining height of coal seams and the heights of a caving zone and a fracture zone are nearly linearly correlated with the mining height. Through analysis based on thin-plate theory and key stratum theory, the location of the main roof of the fully mechanized coal mining face backfilled with gangue in coal seams first bending and sinking due to load of overlying strata was ascertained. Then, it was determined that there are two key strata and the main roof belongs to the inferior key stratum. By using the established mechanical model for the main roof of the fully mechanized coal mining face backfilled with gangue and the calculation formula for the maximum deflection of the main roof, this research presented the conditions for breaking of the main roof. In addition, based on the theoretical analysis, it is concluded that the main roof of the fully mechanized coal mining face backfilled with gangue does not break, but bends. The numerical simulation results demonstrate that, with the continuous increase of strength of backfilled gangue, the stress concentration degree of surrounding rock reduces constantly, so does its decrease amplitude. Moreover, the compressive deformation of backfilling, failure depth of the floor, and bending and subsidence of the main roof continuously decrease and tend to be stable. The mechanical properties of backfilling materials determine effects of gangue backfilling in controlling surface subsidence. Gangue backfilling can effectively control movement of overlying strata and surface subsidence tends to be stable with the increase of elastic modulus of gangue.


2012 ◽  
Vol 524-527 ◽  
pp. 673-676
Author(s):  
Zhi Tao Ma ◽  
Sai Jiang Liang ◽  
Yong Ping Wang

Coal is one of the non-renewable resources, and in our country at present also is the main source of energy. It is very important to improve the coal mining rate, to exploit and to use the coal reasonably. Saving coal resource is an important measure for our coal industries sustainable development. Because large amounts of coal under complex conditions caused by fully mechanized mining can not be mined, the rotation mining with large angle for unequal and fully mechanized mining face and its design and main parameters are introduced in this article based on an engineering practice. Using this mining method, the coal under complex condition can be mined as much as possible. It is helpful for us to improve coal mining rate and to economize coal resources.


Algorithms ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 84 ◽  
Author(s):  
Ting Liu ◽  
Chao Tan ◽  
Zhongbin Wang ◽  
Jing Xu ◽  
Yiqiao Man ◽  
...  

The horizontal bending angle of scraper conveyor has a great influence on the running resistance, the current consumption, coal winning efficiency of the working surface, etc. Approximately 1–3° is usually the range of horizontal bending angle, but does not indicate the optimum bending angle of the coal mining face. To find the optimal horizontal bending angle, an optimization method is proposed. A mathematical calculation model of the running resistance of the scraper is established based on the direction of the shearer operation. Then, a method of adjusting the step size of the search by inertia weight and expanding fly distance range obeying the t-distribution is proposed based on the basic bat algorithm (BA). Finally, an industrial application was conducted in 21220 Changcun fully mechanized coal mining face, Henan Province. The results show that the current consumption by the scraper conveyor was reduced by 31% when the horizontal bending angle of the S-bending area was 0.66°. Meanwhile, the theoretical current has good consistency with the experimental data, and the average absolute error was 3%.


2018 ◽  
Vol 53 ◽  
pp. 03040
Author(s):  
Wu Zuoqi ◽  
Wang Guoku ◽  
Zhao Liqin

The law of surface cracks caused by coal mining in ther thin bedrock and thick unconsolidated layer was studied in Yu-Shen-Fu mining area. The crack development in the overlying strata of the coal mining face was detected by drilling survey technology, the whole process of the ground surface crack dynamic evolution was carried out by similar material simulation, and the law of surface cracks evolution was verified by on-site tracking measurement. The study reached the regulation of the overlying strata failure and dynamic evolution of surface cracks caused by coal mining under thin bedrock and thick unconsolidated layer in Yu-Shen-Fu mining area, which can provide theoretical support for the ecological restoration of western mining area.


Sign in / Sign up

Export Citation Format

Share Document