scholarly journals Feeding design in free-living mesostigmatid chelicerae (Acari: Anactinotrichida)

2021 ◽  
Author(s):  
Clive E. Bowman
Keyword(s):  
Body Size ◽  
Resource Partitioning ◽  
High Speed ◽  
Functional Group ◽  
Velocity Ratio ◽  
Size Class ◽  
Feeding Habit ◽  
Construction Site ◽  
Free Living ◽  
Predictive Algorithm

AbstractA model based upon mechanics is used in a re-analysis of historical acarine morphological work augmented by an extra seven zoophagous mesostigmatid species. This review shows that predatory mesostigmatids do have cheliceral designs with clear rational purposes. Almost invariably within an overall body size class, the switch in predatory style from a worm-like prey feeding (‘crushing/mashing’ kill) functional group to a micro-arthropod feeding (‘active prey cutting/slicing/slashing' kill) functional group is matched by: an increased cheliceral reach, a bigger chelal gape, a larger morphologically estimated chelal crunch force, and a drop in the adductive lever arm velocity ratio of the chela. Small size matters. Several uropodines (Eviphis ostrinus, the omnivore Trachytes aegrota, Urodiaspis tecta and, Uropoda orbicularis) have more elongate chelicerae (greater reach) than their chelal gape would suggest, even allowing for allometry across mesostigmatids. They may be: plesiosaur-like high-speed strikers of prey, scavenging carrion feeders (like long-necked vultures), probing/burrowing crevice feeders of cryptic nematodes, or small morsel/fragmentary food feeders. Some uropodoids have chelicerae and chelae which probably work like a construction-site mechanical excavator-digger with its small bucket. Possible hoeing/bulldozing, spore-cracking and tiny sabre-tooth cat-like striking actions are discussed for others. Subtle changes lead small mesostigmatids to be predator–scavengers (mesocarnivores) or to be predator–fungivores (hypocarnivores). Some uropodines (e.g., the worm-like prey feeder Alliphis siculus and, Uropoda orbicularis) show chelae similar in design to astigmatids and cryptostigmatids indicating possible facultative saprophagy. Scale matters—obligate predatory designs (hypercarnivory) start for mesostigmatids with chelal gape > 150 μm and cheliceral reach > 350 μm (i.e., about 500–650 μm in body size). Commonality of trophic design in these larger species with solifugids is indicated. Veigaia species with low chelal velocity ratio and other morphological strengthening specialisms, appear specially adapted in a concerted way for predating active soft and fast moving springtails (Collembola). Veigaia cerva shows a markedly bigger chelal gape than its cheliceral reach would proportionately infer suggesting it is a crocodile-like sit-and-wait or ambush predator par excellence. A small chelal gape, low cheliceral reach, moderate velocity ratio variant of the worm-like feeding habit design is supported for phytoseiid pollenophagy. Evidence for a resource partitioning model in the evolution of gnathosomal development is found. A comparison to crustacean claws and vertebrate mandibles is made. Alliphis siculus and Rhodacarus strenzkei are surprisingly powerful mega-cephalics for their small size. Parasitids show a canid-like trophic design. The chelicera of the nematophagous Alliphis halleri shows felid-like features. Glyphtholaspis confusa has hyaena-like cheliceral dentition. The latter species has a markedly smaller chelal gape than its cheliceral reach would suggest proportionately, which together with a high chelal velocity ratio and a high estimated chelal crunch force matches a power specialism of feeding on immobile tough fly eggs/pupae by crushing (durophagy). A consideration of gnathosomal orientation is made. Predatory specialisms appear to often match genera especially in larger mesostigmatids, which may scale quite differently. Comparison to holothyrids and opilioacarids indicates that the cheliceral chelae of the former are cutting-style and those of the latter are crushing-style. A simple validated easy-to-use ‘2:1 on’ predictive algorithm of feeding habit type is included based on a strength-speed tradeoff in chelal velocity ratio for ecologists to test in the field.

Effect of velocity ratio on the interaction between plasma synthetic jets and turbulent cross-flow

2019 ◽  
Vol 865 ◽  
pp. 928-962 ◽  
Author(s):  
Haohua Zong ◽  
Marios Kotsonis
Keyword(s):  
Boundary Layer ◽  
High Speed ◽  
Velocity Ratio ◽  
Vortex Pair ◽  
Synthetic Jets ◽  
Low Energy ◽  
Vortex Rings ◽  
Wall Region ◽  
Mean Velocity ◽  
Counter Rotating Vortex Pair

Plasma synthetic jet actuators (PSJAs) are particularly suited for high-Reynolds-number, high-speed flow control due to their unique capability of generating supersonic pulsed jets at high frequency (${>}5$  kHz). Different from conventional synthetic jets driven by oscillating piezoelectric diaphragms, the exit-velocity variation of plasma synthetic jets (PSJs) within one period is significantly asymmetric, with ingestion being relatively weaker (less than $20~\text{m}~\text{s}^{-1}$) and longer than ejection. In this study, high-speed phase-locked particle image velocimetry is employed to investigate the interaction between PSJAs (round exit orifice, diameter 2 mm) and a turbulent boundary layer at constant Strouhal number (0.02) and increasing mean velocity ratio ($r$, defined as the ratio of the time-mean velocity over the ejection phase to the free-stream velocity). Two distinct operational regimes are identified for all the tested cases, separated by a transition velocity ratio, lying between $r=0.7$ and $r=1.0$. At large velocity and stroke ratios (first regime, representative case $r=1.6$), vortex rings are followed by a trailing jet column and tilt downstream initially. This downstream tilting is transformed into upstream tilting after the pinch-off of the trailing jet column. The moment of this transformation relative to the discharge advances with decreasing velocity ratio. Shear-layer vortices (SVs) and a hanging vortex pair (HVP) are identified in the windward and leeward sides of the jet body, respectively. The HVP is initially erect and evolves into an inclined primary counter-rotating vortex pair ($p$-CVP) which branches from the middle of the front vortex ring and extends to the near-wall region. The two legs of the $p$-CVP are bridged by SVs, and a secondary counter-rotating vortex pair ($s$-CVP) is induced underneath these two legs. At low velocity and stroke ratios (second regime, representative case $r=0.7$), the trailing jet column and $p$-CVP are absent. Vortex rings always tilt upstream, and the pitching angle increases monotonically with time. An $s$-CVP in the near-wall region is induced directly by the two longitudinal edges of the ring. Inspection of spanwise planes ($yz$-plane) reveals that boundary-layer energization is realized by the downwash effect of either vortex rings or $p$-CVP. In addition, in the streamwise symmetry plane, the increasing wall shear stress is attributed to the removal of low-energy flow by ingestion. The downwash effect of the $s$-CVP does not benefit boundary-layer energization, as the flow swept to the wall is of low energy.

Another new, diminutive Rock Gecko (Cnemaspis Strauch) from Peninsular Malaysia and a discussion of resource partitioning in sympatric species pairs

Zootaxa ◽  
2010 ◽  
Vol 2569 (1) ◽  
pp. 55 ◽  
Author(s):  
L. LEE GRISMER ◽  
CHAN KIN ONN ◽  
EVAN QUAH ◽  
MOHD ABDUL MUIN ◽  
ANNA E. SAVAGE ◽  
...  
Keyword(s):  
New Species ◽  
Body Size ◽  
Endemic Species ◽  
Resource Partitioning ◽  
Sympatric Species ◽  
Southeast Asian ◽  
Peninsular Malaysia ◽  
Activity Period ◽  
Species Pairs

A new, diminutive species of Rock Gecko, Cnemaspis shahruli sp. nov. from Penang Island, Penang; Pulau Jerejak, Penang; Pulau Pangkor, Perak; and the adjacent mainland at Sungai Sedim, Kedah was previously confused with juveniles of the sympatric, endemic species C. affinis (Stoliczka) on Penang Island. Cnemaspis shahruli sp. nov. is diagnosed from all other Southeast Asian Cnemaspis on the basis of several unique aspects of squamation, coloration, and body size. It is proposed that this new species has a more extensive mainland distribution than is presented here based on its southernmost record on Pulau Pangkor, Perak. A pattern of resource partitioning on the basis of body size, habitat, and activity period among sympatric species pairs of Cnemaspis is discussed.

scholarly journals Strengthening of a railway arch bridge from 1854

2018 ◽  
Vol 199 ◽  
pp. 10004
Author(s):  
Ole Viggo Andersen
Keyword(s):  
Reinforced Concrete ◽  
High Speed ◽  
Timber Structure ◽  
Construction Site ◽  
Construction Work ◽  
Arch Bridge ◽  
Freeze Thaw ◽  
Creek Water ◽  
Bottom Slab ◽  
Working Processes

This paper presents the inspection of the condition and the design for strengthening of an existing railway arch bridge constructed in 1854. The original arch bridge is constructed with 5 layers of bricks in the arch and granite blocks in the foundation on top of an arrangement of frame made of timber and carried by piles. From the inspection it was concluded that the bricks in the arch was damaged due to freeze-thaw. It was also concluded that the timber structure in the foundation was rotten. The bridge is crossing a small creek. The environment is very sensitive. The access to the construction site is passing through landscape subject to preservation. The strengthening project included the arrangement of a new reinforced concrete arch. The arch was anchored with glued reinforcement bonded to the existing brick arch. The reinforcement and formwork was placed above the creek without disturbing the fauna in the water. The concrete was pumped into a form under the existing arch. After curing of the concrete arch, the strengthening of the foundation was initiated. It was planned to construct a bottom slab under the creek, which was able to carry the new concrete arch. In order to get access for the construction work the creek water was pumped through pipes suspended under the top of the new concrete arch. The procedures to handle the very delicate situation of replacing the foundation, while the bridge was in operation, and also protecting the environment is described in detail in the presentation. The process included high speed concrete curing, working processes under extreme narrow conditions and a very tight schedule.

Impingement of an unsteady two-phase jet on unheated and heated flat plates

1993 ◽  
Vol 252 ◽  
pp. 499-523 ◽  
Author(s):  
İ. Bedii Özdemir ◽  
J. H. Whitelaw
Keyword(s):  
Wall Temperature ◽  
High Speed ◽  
Continuous Phase ◽  
Size Class ◽  
Wall Jet ◽  
Flat Plates ◽  
Two Phase ◽  
Secondary Atomization ◽  
Wall Jet Flow ◽  
The Impact

This paper is concerned with an experimental investigation of the oblique impingement of an unsteady, axisymmetric two-phase jet on heated surfaces. Size and velocity were measured simultaneously with a phase-Doppler velocimeter, and the spatial distributions over the wall jet were found to be correlated with the interfacial activities as inferred from vertical velocity measurements in the vicinity of the wall. These results are discussed together with size measurements by a laser-diffraction technique to quantify the effect of the approach conditions of the inflowing jet droplet field and wall temperature in relation to mechanisms of secondary atomization.Two mechanisms of secondary atomization were identified; the first did not involve direct wall contact and was due to the strain acting on the droplets by the continuous phase within the impingement region and was enhanced by thermal effects from the wall to cause breakup. The approaching velocity of the inflowing droplets to the plate was important to this process so that higher velocities increased the rate of strain within the impingement region and, consequently, the wall temperature promoting the secondary atomization shifted towards lower values. The second mechanism required direct wall contact and involved atomization of the film deposited on the wall by the impingement of the inflowing two-phase jet. With the penetration of high-speed inflowing droplets into the film, liquid mass was raised into the two-phase medium due to splashes from the film so that a new size class with larger droplets was generated. The resulting large droplets tended to stay close to the wall within the impingement region with small vertical velocitiesIn between the injections, the suspended droplet field above the film oscillated normal to the plate as a cloud so that the impact of large droplets on the film resulted in coalescence with the film and the ejection of smaller numbers of small droplets. The unsteady wall jet flow, caused by the arrival of the spray at the plate, swept the vertically oscillating droplet cloud radially outwards so that the resulting radial transport caused the dynamics of the unsteady film to be correlated with the size characteristics of the unsteady wall jet. Based on this phenomenological description, a radial droplet transport equation is derived.The correlation suggests that the secondary atomization with direct wall contact is the dominant process for the generation of a new size class within the wall flow and initiates the mutual interaction between the unsteady film and wall jet droplet field.

Resource partitioning among air-breathing marine predators: are body size and mouth diameter the major determinants?

2016 ◽  
Vol 37 (5) ◽  
pp. 957-969 ◽  
Author(s):  
Fabiana Saporiti ◽  
Stuart Bearhop ◽  
Damián G. Vales ◽  
Laura Silva ◽  
Lisette Zenteno ◽  
...  
Keyword(s):  
Body Size ◽  
Resource Partitioning ◽  
Air Breathing ◽  
Marine Predators

scholarly journals Evidence for benthic body size miniaturization in the deep sea

2006 ◽  
Vol 86 (6) ◽  
pp. 1339-1345 ◽  
Author(s):  
Janne I. Kaariainen ◽  
Brian J. Bett
Keyword(s):  
Body Size ◽  
Deep Sea ◽  
Size Structure ◽  
Size Class ◽  
The Body ◽  
Significant Shift ◽  
Individual Biomass ◽  
Wet Weight ◽  
Accumulation Curves ◽  
Average Individual

The benthic body size miniaturization hypothesis states that deep-sea communities are dominated by organisms of smaller body size, although some field studies have produced contradictory results. Using appropriate sample sets, this study tests this hypothesis by contrasting the benthic communities of the Fladen Ground (North Sea, 150 m) and the Faroe–Shetland Channel (1600 m). Samples were collected for large (500 μm) and small macrofauna (250–355 μm), meiofauna (45 μm) as well as an intermediate sized ‘mesofauna’ (180 μm) to ensure comprehensive coverage of the full meio- and macro-faunal body size-range. The body size structure of the benthos was compared using two methods. The more widely used average individual biomass method involves dividing the total sample biomass by sample abundance. Additionally, body size accumulation curves were constructed by assigning all specimens into a logarithmic size-class and then plotting the cumulative percentage of individuals present in each size-class. The results seem to support the hypothesis that the deep-sea environment is a small organism habitat. Although these findings only represent two locations, the overall body size accumulation curves clearly display a statistically significant shift towards smaller body sizes at the deeper site. The magnitude of the effect is appreciable with median metazoan body size reducing from 14.3 μg wet weight in the Fladen Ground to 3.8 μg wet weight in the Faroe–Shetland Channel. The average individual biomass measurements are shown to be of limited value and can lead to potentially misleading conclusions if the underlying size structure is not analysed in detail.

Computational Fluid Dynamics Study of Oil Behavior in a Scoop, and Factors Affecting Scoop Capture Efficiency

2020 ◽  
Vol 142 (5) ◽  
Author(s):  
Evgenia Korsukova ◽  
Hervé Morvan
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Gas Turbines ◽  
High Speed ◽  
Velocity Ratio ◽  
Capture Efficiency ◽  
Parameter Analysis ◽  
Parameter Study ◽  
3D Simulations ◽  
Engine Components

Abstract Due to the continuous reduction of engine sizes, efficient under-race lubrication becomes ever more crucial in order to provide sufficient amount of oil to various engine components. An oil scoop is a rotating component that captures oil from a jet, and axially redirects it to the bearing, providing under-race lubrication. Given the importance of lubrication in high-speed engine components, the efficiency study of under-race lubrication appliances receives rapidly growing demands from manufacturers and therefore is of great interest. This work provides description of computational fluid dynamics (CFD) methods that were found to be most accurate and efficient for a large parameter analysis of the scoop capture efficiencies. One of the main purposes of this paper is to demonstrate an optimal and validated computational approach to modeling under-race lubrication with a focus on oil capture efficiency. Second, to show which factors most influence the scoop capture efficiency. Additionally, simulations allow for the fluid behavior inside the scoop to be observed that cannot be visualized experimentally due to high speeds. An improved method of efficiency calculation is also presented and compared to existing methods (Cageao, P. P., Simmons, K., Prabhakar, A., and Chandra, B., 2019, “Assessment of the Oil Scoop Capture Efficiency in High Speed Rotors,” ASME J. Eng. Gas Turbines Power, 141(1), p. 012401; Korsukova, E., Kruisbrink, A., Morvan, H., Paleo Cageao, P., and Simmons, K., 2016, “Oil Scoop Simulation and Analysis Using CFD and SPH,” ASME Paper No. GT2016-57554.). Results of both two-dimensional (2D) and semi-three-dimensional (3D) simulations are provided. Both qualitative comparison of 2D with semi-3D simulations and quantitative comparison of 2D simulations with experiments (Cageao, P. P., Simmons, K., Prabhakar, A., and Chandra, B., 2019, “Assessment of the Oil Scoop Capture Efficiency in High Speed Rotors,” ASME J. Eng. Gas Turbines Power, 141(1), p. 012401) show consistency. Parameter study using 2D simulations is shown with variation of rotational scoop speed, jet angles, velocity ratio. Key results show that changes of the jet angle and velocity ratio can improve the scoop efficiency.

scholarly journals A Study of Bubble Mineralization by Modified Glass Microspheres Based on a High-Speed Dynamic Microscopic Test System

Minerals ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 350 ◽  
Author(s):  
Fanfan Zhang ◽  
Yijun Cao ◽  
Xiaokang Yan ◽  
Lijun Wang ◽  
Yajun Xu
Keyword(s):  
Contact Angle ◽  
High Speed ◽  
Functional Group ◽  
Research Process ◽  
Test System ◽  
Glass Microsphere ◽  
Collision Probability ◽  
Glass Microspheres ◽  
Large Glass ◽  
Small Glass

The microscopic study of bubble mineralization is an important means of flotation theory research. In order to visualize the research process, it is required that the particles have certain optical properties and the amount of bubbles is controllable. In this paper, the particles were glass microspheres modified with trimethylchlorosilane (TMCS). The modification effect was confirmed by Fourier-transform infrared spectroscopy (FTIR), contact angle measurements, and a flotation test. The FTIR analysis and flotation test verified that the functional group (-OH) of glass microspheres reacted with the functional group (-Si-Cl) of TMCS and that the glass microsphere surface was successfully modified. The results also showed that the contact angle and hydrophobicity of the glass microspheres of a given size increased with the increase of TMCS. A small glass microsphere required more TMCS during the modification step in order to have the same contact angle as a large glass microsphere. The microscopic process of bubble mineralization was captured by a high-speed dynamic analysis system. The probability of collision between large glass microspheres and bubbles was high, but so was the probability that the microspheres would detach from the bubble. Both the collision probability and the detachment probability between small glass microspheres and bubbles were small, and small glass microspheres were easily affected by the flotation fluid. Besides, small bubbles and fine glass microspheres had a higher flotation recovery than coarse glass microspheres and large bubbles.

The Ecology of Rattus lutreolus III*. The Rise and Fall of a Commensal Population

1980 ◽  
Vol 7 (2) ◽  
pp. 199 ◽  
Author(s):  
RW Braithwaite
Keyword(s):  
Body Size ◽  
Habitat Use ◽  
Breeding Season ◽  
Sexual Maturity ◽  
Free Living ◽  
Mark Recapture

A free-living population of R. lutreolus living in and around the zoo enclosures of the Sir Colin MacKenzie Fauna Park at Healesville was studied for 27 months by use of mark-recapture trapping techniques. The demography of this population is compared with that of a natural heathland population. The breeding season was 2-3 months longer, growth of juveniles was more rapid, sexual maturity earlier, minimum survival shorter, body size larger, and habitat use less restricted in the commensal population. The evolution of the population and its decline are discussed.

Sign in / Sign up

Export Citation Format

Share Document