Modeling of a Space Heating System Coupled with Underground Energy Storage

2018 ◽  
Vol 51 (3) ◽  
pp. 373-400
Author(s):  
Guoxiang Zhao ◽  
Kewen Li ◽  
Changwei Liu ◽  
Lin Jia ◽  
Bheki Mahlalela Mahlalela
2019 ◽  
Vol 4 (12) ◽  
pp. 41-47
Author(s):  
Md. Habibur Rahaman ◽  
Tariq Iqbal

Almost all single-family detached houses in Canada consume enormous electrical energy for space heating and domestic hot water (DHW) purposes. There are many possibilities to design an energy-efficient house. A solar water heating system can be used for domestic water and space heating. Water temperature can be kept constant always by connecting a heat pump or oil burner to the main tank because solar energy is intermittent. The sizing of solar photovoltaic and collector, tank, heat pump are essential to design an effective system based on the system energy consumption. The existing house is just a conventional house where space and water heating are provided by the grid electricity only. In this research, two possible ways of thermal energy storage systems have been designed for a residential single-family house with solar collector and solar photovoltaic. It is proved that the proposed PV based energy storage system is highly suitable considering lower cost, high output power, flexibility, and easy installation.


Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3350
Author(s):  
Theofanis Benakopoulos ◽  
William Vergo ◽  
Michele Tunzi ◽  
Robbe Salenbien ◽  
Svend Svendsen

The operation of typical domestic hot water (DHW) systems with a storage tank and circulation loop, according to the regulations for hygiene and comfort, results in a significant heat demand at high operating temperatures that leads to high return temperatures to the district heating system. This article presents the potential for the low-temperature operation of new DHW solutions based on energy balance calculations and some tests in real buildings. The main results are three recommended solutions depending on combinations of the following three criteria: district heating supply temperature, relative circulation heat loss due to the use of hot water, and the existence of a low-temperature space heating system. The first solution, based on a heating power limitation in DHW tanks, with a safety functionality, may secure the required DHW temperature at all times, resulting in the limited heating power of the tank, extended reheating periods, and a DH return temperature of below 30 °C. The second solution, based on the redirection of the return flow from the DHW system to the low-temperature space heating system, can cool the return temperature to the level of the space heating system return temperature below 35 °C. The third solution, based on the use of a micro-booster heat pump system, can deliver circulation heat loss and result in a low return temperature below 35 °C. These solutions can help in the transition to low-temperature district heating.


2020 ◽  
Vol 10 (3) ◽  
pp. 5814-5818
Author(s):  
M. A. Aichouni ◽  
N. F. Alshammari ◽  
N. Ben Khedher ◽  
M. Aichouni

The intermittent nature of renewable energy sources such as solar and wind necessitates integration with energy-storage units to enable realistic applications. In this study, thermal performance enhancement of the finned Cylindrical Thermal Energy Storage (C-TES) with nano-enhanced Phase Change Material (PCM) integrated with the water heating system under Storage, Charging and Discharging (SCD) conditions were investigated experimentally. The effects of the addition of copper oxide (CuO) and aluminum oxide (Al2O3) nanoparticles in PCM on thermal conductivity, specific heat, and on charging and discharging performance rates were theoretically and experimentally investigated and studied in detail. The experimental apparatus utilized paraffin wax as PCM, which was filled in Finned C-TES to conduct the experiments. The experimental results showed a positive improvement compared with the non-nano additive PCM. The significance and originality of this project lies within the evaluation and identification of preferable metal-oxides with higher potential for improving thermal performance.


Author(s):  
Nidhi Agrawal ◽  
Bhuvnesh Kumar ◽  
Bhanu Verma ◽  
Harald Mehling ◽  
Bharti Arora

Sign in / Sign up

Export Citation Format

Share Document