Formalization and configuration methodology for high-radix combined switches

2014 ◽  
Vol 69 (3) ◽  
pp. 1410-1444 ◽  
Author(s):  
Juan A. Villar ◽  
Francisco J. Andújar ◽  
Francisco J. Alfaro ◽  
José L. Sánchez ◽  
José Duato
2021 ◽  
Vol 37 (01) ◽  
pp. 045-052
Author(s):  
Mario Bazanelli Junqueira Ferraz ◽  
Guilherme Constante Preis Sella

AbstractNasal dorsal preservation surgery was described more than 100 years ago, but recently has gained prominence. Our objective is to show the surgical technique, the main indications and counterindications, and the complications. It is a technique that does not cause the detachment of the upper lateral cartilage (ULC) from the nasal septum, and has the main following sequence: preparation of the septum and its resection can be at different levels (high or low, i.e., SPAR [septum pyramidal adjustment and repositioning] A or B); preparation of the pyramid; transversal osteotomy; lateral osteotomy(s); and septopyramidal adjustment. The result is a nose with a lower radix than the original, a deprojection of the nasal dorsum tending to maintain its original shape; an increase in the interalar distance (IAD) and enlargement of the nasal middle ⅓; and loss of projection of the nasal tip and roundness of the nostrils. Thus, the ideal candidate is the one who benefits from such side effects, that is: tension nose, that is, high radix with projected dorsum, projected anterior nasal septal angle (ANSA), narrow middle ⅓, narrow IAD, thin nostrils and straight perpendicular plate of the ethmoid (PPE), and, depending on the characteristics, the deviated nose. The counterindications are low radix, irregularities in the nasal dorsum, ANSA lower than rhinion, and a wide middle ⅓. And the main stigmas are: a nose with a very low radix, middle ⅓ enlarged, residual hump, and saddling of the supratip area. Other issues of this technique are: the shape of the radix; the need or not to remove PPE; wide dorsum; irregular dorsum; ANSA lower than rhinion; weak cartilages; long nasal bone; deviated PPE; and obsessive patient. We conclude that this is a great technique for noses with characteristics suitable to it; care must be taken with the stigmas it can cause.


Author(s):  
Dan Alistarh ◽  
Hitesh Ballani ◽  
Paolo Costa ◽  
Adam Funnell ◽  
Joshua Benjamin ◽  
...  

2021 ◽  
Vol 13 (11) ◽  
pp. 5859
Author(s):  
Shedong Ren ◽  
Fangzhi Gui ◽  
Yanwei Zhao ◽  
Min Zhan ◽  
Wanliang Wang ◽  
...  

Low-carbon product design involves a redesign process that requires not only structural module modification, but more importantly, generating innovative principles to solve design contradictions. Such contradictions include when current design conditions cannot satisfy design requirements or there are antithetical design goals. On the other hand, configuration tasks in the reconfiguration process are interdependent, which requires a well-scheduled arrangement to reduce feedback information. This study proposes an effective configuration methodology for low-carbon design. Firstly, configuration tasks and configuration parameters are designated through quality characteristics, and the directed network along with the associated values of configuration tasks are transformed into the design structure matrix to construct the information flow diagram. Then, the Extenics-based problem-solving model is presented to address design contradictions: low-carbon incompatibility and antithetical problems are clarified and formulated with a basic-element model; extensible and conjugate analysis tools are used to identify problematic structures and provide feasible measures; the Gantt chart of measures execution based on the information flow diagram is constructed to reduce feedback and generate robust schemes with strategy models. The methodology is applied to the vacuum pump low-carbon design, the results show that it effectively solves contradictions with innovative design schemes, and comparative analysis verifies the performance of Extenics.


Author(s):  
Luis Carral ◽  
Isabel Lamas–Galdo ◽  
Jesús Rodríguez-Guerreiro ◽  
Andreina Vargas ◽  
Carlos Álvarez-Feal ◽  
...  

Author(s):  
Nathan Binkert ◽  
Al Davis ◽  
Norman P. Jouppi ◽  
Moray McLaren ◽  
Naveen Muralimanohar ◽  
...  
Keyword(s):  

2019 ◽  
Vol 28 (03) ◽  
pp. 1950037 ◽  
Author(s):  
A. Bellemou ◽  
N. Benblidia ◽  
M. Anane ◽  
M. Issad

In this paper, we present Microblaze-based parallel architectures of Elliptic Curve Scalar Multiplication (ECSM) computation for embedded Elliptic Curve Cryptosystem (ECC) on Xilinx FPGA. The proposed implementations support arbitrary Elliptic Curve (EC) forms defined over large prime field ([Formula: see text]) with different security-level sizes. ECSM is performed using Montgomery Power Ladder (MPL) algorithm in Chudnovsky projective coordinates system. At the low abstraction level, Montgomery Modular Multiplication (MMM) is considered as the critical operation. It is implemented within a hardware Accelerator MMM (AccMMM) core based on the modified high radix, [Formula: see text] MMM algorithm. The efficiency of our parallel implementations is achieved by the combination of the mixed SW/HW approach with Multi Processor System on Programmable Chip (MPSoPC) design. The integration of multi MicroBlaze processor in single architecture allows not only the flexibility of the overall system but also the exploitation of the parallelism in ECSM computation with several degrees. The Virtex-5 parallel implementations of 256-bit and 521-bis ECSM computations run at 100[Formula: see text]MHZ frequency and consume between 2,739 and 6,533 slices, 22 and 72 RAMs and between 16 and 48 DSP48E cores. For the considered security-level sizes, the delays to perform single ECSM are between 115[Formula: see text]ms and 14.72[Formula: see text]ms.


Author(s):  
Jianping Kelvin Li ◽  
Misbah Mubarak ◽  
Robert B. Ross ◽  
Christopher D. Carothers ◽  
Kwan-Liu Ma

Sign in / Sign up

Export Citation Format

Share Document