Physicochemical characterization and determination of chloramphenicol residues and heavy metals in Algerian honeys

2018 ◽  
Vol 25 (33) ◽  
pp. 33322-33333 ◽  
Author(s):  
Yamina Mehdi ◽  
Ashraf Mutlaq ◽  
Qosay Al-Balas ◽  
Elhanafi Azzi ◽  
Lamia Bouadjela ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Physicochemical Characterization

scholarly journals Physicochemical Characterization of Mining Waste from the Betare-Oya Gold Area (East Cameroon) and an Adsorption Test by Sabga Smectite (North-West Cameroon)

Scientifica ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Mambou Ngueyep Luc Leroy ◽  
Mache Jacques Richard ◽  
Ayiwouo Ngounouno Mouhamed ◽  
Takougang Kingni Sifeu ◽  
Abende Sayom Reynolds Yvan ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Water Samples ◽  
Suspended Solids ◽  
Physicochemical Characterization ◽  
Mining Waste ◽  
Operating Conditions ◽  
Sediment Samples ◽  
North West

This paper, firstly, characterizes the mining waste of the Betare-Oya gold area (East Cameroon). Surface waters are sampled and characterized physically (pH, electrical conductivity, turbidity, and suspended solids) and chemically by the determination of trace metals (Cu, Zn, Ni, Mn, Fe, Cr, As, and Pb). The concentrations of heavy metals in sediment samples are determined by X-ray Fluorescence Spectrometry (XRF) analysis. The statistical analysis tool is used to determine the existing correlation between the different physicochemical parameters. Secondly, an adsorption test for heavy metals determined is carried out on smectic clay of Sabga (North-West Cameroon) at ambient temperature. The results of physicochemical characterization of water samples reveal that waters of this gold mining zone are slightly acidic to neutral (6.3 pH < 7.1), mineralized (18.54 EC < 43 μs.cm−1), turbid (60 SS < 237.67 NTU), and polluted by suspended solids (50.5 < SS < 666.6 mg L−1).The determination of heavy metals in water samples shows that manganese, iron, arsenic, and lead concentrations are above the World Health Organization (WHO) limits. This indicates pollution. High concentrations of heavy metals as Cu, Ni, Mn, Fe, and Cr are observed in sediment samples. The correlation analysis indicates high correlations between turbidity and suspended solids; cadmium and lead in water samples; and copper and iron in sediment samples. The adsorption test reveals that the maximum percentage removal is 60, 89, 55, −89.74, and 100% for Cu, Zn, Mn, Fe, and Pb, respectively, after adding 0.5 g of Sabga smectic clay. This clay has a good potential adsorption of lead, zinc, manganese, and copper. However, the operating conditions favored desorption of iron.

Determination of some heavy metals (Fe, Cu, Zn and Pb) in blood by total reflection X-ray fluorescence

2003 ◽  
Vol 107 ◽  
pp. 203-206 ◽  
Author(s):  
M. Bounakhla ◽  
A. Doukkali ◽  
K. Lalaoui ◽  
H. Aguenaou ◽  
N. Mokhtar ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Total Reflection ◽  
X Ray

Determination of selected heavy metals in tuna fish (Thunnus thynnus)

2013 ◽  
Vol 38 (03) ◽  
Author(s):  
S Mol ◽  
S Karakulak ◽  
S Ulusoy
Keyword(s):  
Heavy Metals ◽  
Thunnus Thynnus ◽  
Tuna Fish

Determination of Traces Heavy Metals from Solid Residues Formed by Combustion of Lignite in Relation to Degree of Accessibility in Soil and Plants

2017 ◽  
Vol 68 (10) ◽  
pp. 2363-2366
Author(s):  
Delia Nica Badea
Keyword(s):  
Heavy Metals ◽  
Power Plant ◽  
Thermal Power ◽  
Reference Value ◽  
Combustion Products ◽  
Toxic Heavy Metals ◽  
Area Of Influence ◽  
Risk Potential

The paper evaluates the presence and content of traces of heavy metals Hg, Pb, Ni, Cd (total forms) from coal and solid combustion products, the degree of transfer and accessibility in the area of influence of a lignite power plant. The content of toxic heavy metals in residues are characterized by RE Meiji [ 1 (Pb and Hg) and REMeij �1 (Ni and Cd) for the filter ash. Pb and Ni content in the soil exceeds normal values, and Pb exceeds and alert value for sensitive soils around the residue deposit (70.20 mg.Kg-1). The degree of accessibility of the metals in plants (TF), reported at the Khan reference value (0.5), indicates a significant bioaccumulation level for the metals: Cd (1.9) and Hg (0.6) inside the deposit; Cd (0.39) at the base of the deposit, Hg (0.8) in the area of the thermal power plant. The trace levels of heavy metals analyzed by GFAAS and CVAAS (Hg), indicates a moderate risk potential for food safety and quality of life in the studied area.

Sign in / Sign up

Export Citation Format

Share Document