Analytical solutions for the earth pressure of narrow cohesive backfill with retaining walls rotating about the top

2021 ◽  
Author(s):  
Yu-jian Lin ◽  
Fu-quan Chen ◽  
Yan-ping Lv
Keyword(s):  
Analytical Solutions ◽  
Earth Pressure ◽  
Retaining Walls ◽  
The Earth

Evaluation of active earth pressure by the generalized method of slices

1998 ◽  
Vol 35 (4) ◽  
pp. 591-599 ◽  
Author(s):  
Zuyu Chen ◽  
Songmei Li
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Slip Surface ◽  
Limit Equilibrium ◽  
Earth Pressure ◽  
Retaining Walls ◽  
Slope Stability Analysis ◽  
Pressure Limit ◽  
The Earth ◽  
Earth Pressures

The generalized method of slices, commonly used in slope stability analysis, can be extended to determine active earth pressures applied to various types of supports. The governing force and moment equlibrium equations are given. In a similar manner to slope stability analysis, the methods of optimization are used to define the critical slip surface that is associated with the maximum wall pressure. Examples show that the approaches give active earth pressures identical to the Rankine solution for gravity walls. For other types of support, such as anchored or strutted walls, the earth pressure is determined by assigning appropriate locations of the point of application on the wall. It has been found that applying the restrictions of physical admissibility is more vital in earth pressure problems than in slope stability assessments.Key words: earth pressure, limit equilibrium method, the method of slices, retaining walls.

Evaluation of Earth Pressures Against Rigid Retaining Structures with RTT Mode

2010 ◽  
Vol 168-170 ◽  
pp. 200-205
Author(s):  
Fei Song ◽  
Jian Min Zhang ◽  
Lu Yu Zhang
Keyword(s):  
Pressure Distribution ◽  
Formation Mechanism ◽  
Retaining Wall ◽  
Experimental Studies ◽  
Earth Pressure ◽  
Retaining Walls ◽  
Wall Displacement ◽  
The Earth ◽  
Earth Pressures ◽  
Mode A

The evaluation of earth pressure is of vital importance for the design of various retaining walls and infrastructures. Experimental studies show that earth pressures are closely related to the mode and amount of wall displacement. In this paper, based on the reveal of the formation mechanism of earth pressures against rigid retaining wall with RTT mode, a new method is proposed to calculate the earth pressure distribution in such conditions. Finally, the effectiveness of the method is confirmed by the experimental results.

scholarly journals Probabilistic analysis of the active earth pressure on earth retaining walls for c-ϕ soils according to the Mazindrani and Ganjali method

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Julian Osorio ◽  
Juan Camilo Viviescas ◽  
Juan Pablo Osorio
Keyword(s):  
Probabilistic Analysis ◽  
Earth Pressure ◽  
Friction Angle ◽  
Retaining Walls ◽  
Soil Variability ◽  
Active Earth Pressure ◽  
Pressure Coefficients ◽  
Reliability Based Design ◽  
The Earth ◽  
Significant Probability

AbstractThe determination of the earth pressure coefficients (K) in geotechnical engineering is one of the most critical procedures in designing earth retaining walls. However, most earth pressure theories are made for either clay or sands, where the c-ϕ soils are the least analysed. In this paper, an analysis of the earth pressure for drained mixed soils based in Mazindrani and Ganjali (J Geotech Geoenviron Eng 123:110–112, 1997) theory was carried out. Earth pressure coefficients are generally used in a deterministic way and can represent designs under an inadmissible risk. Therefore, Reliability-based design arises as an essential tool to deal with soil variability as one of the main aspects of the geotechnical uncertainties. The influence of the soil variability in the active earth pressure for a c-ϕ soil was performed through probabilistic analysis concerning the Ka coefficient of variation (Cv) of both shear strength parameters. The sensitivity analysis shows a Cv in which the cohesion begins to have a more significant correlation with Ka than the friction angle. The results show an increase of the statistical Ka concerning the deterministic value as the soil variability and the soil slope (β) increase. Although the statistical value does not increase significantly, a statistical analysis on gravity walls and sheet pile walls in c-ϕ soils shows a significant probability of failure (pf) increase. The pf obtained through the c-ϕ variability can be considered inadmissible even if the required FS are met.

Coordinated optimization control of shield machine based on dynamic fuzzy neural network direct inverse control

2020 ◽  
pp. 014233122098027
Author(s):  
Xuanyu Liu ◽  
Wentao Wang ◽  
Yudong Wang ◽  
Cheng Shao ◽  
Qiumei Cong
Keyword(s):  
Fuzzy Neural Network ◽  
Control Method ◽  
Earth Pressure ◽  
Screw Conveyor ◽  
Inverse Control ◽  
The Earth ◽  
Coordinated Optimization ◽  
Optimization Control ◽  
Fuzzy Neural ◽  
Shield Machine

During shield machine tunneling, the earth pressure in the sealed cabin must be kept balanced to ensure construction safety. As there is a strong nonlinear coupling relationship among the tunneling parameters, it is difficult to control the balance between the amount of soil entered and the amount discharged in the sealed cabin. So, the control effect of excavation face stability is poor. For this purpose, a coordinated optimization control method of shield machine based on dynamic fuzzy neural network (D-FNN) direct inverse control is proposed. The cutter head torque, advance speed, thrust, screw conveyor speed and earth pressure difference in the sealed cabin are selected as inputs, and the D-FNN control model of the control parameters is established, whose output are screw conveyor speed and advance speed at the next moment. The error reduction rate method is introduced to trim and identify the network structure to optimize the control model. On this basis, an optimal control system for earth pressure balance (EPB) of shield machine is established based on the direct inverse control method. The simulation results show that the method can optimize the control parameters coordinately according to the changes of the construction environment, effectively reduce the earth pressure fluctuations during shield tunneling, and can better control the stability of the excavation surface.

The earth pressure behind full-height integral abutments

2005 ◽  
Vol 90 (6) ◽  
pp. 55-58 ◽  
Author(s):  
Ming Xu ◽  
Alan G. Bloodworth
Keyword(s):  
Earth Pressure ◽  
The Earth ◽  
Integral Abutments ◽  
Full Height

Lateral Earth Pressure Coefficient of Soils Subjected to Freeze–Thaw

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Xiaodong Zhao ◽  
Guoqing Zhou ◽  
Bo Wang ◽  
Wei Jiao ◽  
Jing Yu
Keyword(s):  
Pressure Coefficient ◽  
Earth Pressure ◽  
Retaining Walls ◽  
Saturated Soil ◽  
Frozen Soils ◽  
Freeze Thaw ◽  
Lateral Earth Pressure ◽  
Soil Deposits ◽  
Earth Pressure Coefficient ◽  
Water Saturated

Artificial frozen soils (AFS) have been used widely as temporary retaining walls in strata with soft and water-saturated soil deposits. After excavations, frozen soils thaw, and the lateral earth pressure penetrates through the soils subjected to freeze–thaw, and acts on man-made facilities. Therefore, it is important to investigate the lateral pressure (coefficient) responses of soils subjected to freeze–thaw to perform structure calculations and stability assessments of man-made facilities. A cubical testing apparatus was developed, and tests were performed on susceptible soils under conditions of freezing to a stable thermal gradient and then thawing with a uniform temperature (Fnonuni–Tuni). The experimental results indicated a lack of notable anisotropy for the maximum lateral preconsolidated pressures induced by the specimen’s compaction and freeze–thaw. However, the freeze–thaw led to a decrement of lateral earth pressure coefficient  K0, and  K0 decrement under the horizontal Fnonuni–Tuni was greater than that under the vertical Fnonuni–Tuni. The measured  K0 for normally consolidated and over-consolidated soil specimens exhibited anisotropic characteristics under the vertical Fnonuni–Tuni and horizontal Fnonuni–Tuni treatments. The anisotropies of  K0 under the horizontal Fnonuni–Tuni were greater than that under the vertical Fnonuni–Tuni, and the anisotropies were more noticeable in the unloading path than that in the loading path. These observations have potential significances to the economical and practical design of permanent retaining walls in soft and water-saturated soil deposits.

Experimental Study on Earth Pressure of Corrugated Steel Culvert under High Fill Embankment

2013 ◽  
Vol 405-408 ◽  
pp. 1815-1819
Author(s):  
Wen Sheng Yu ◽  
Zhu Long Li ◽  
Xiao Ru Xie ◽  
Li Yuan Guo
Keyword(s):  
Mechanical Property ◽  
Experimental Study ◽  
Reinforced Concrete ◽  
Concrete Slab ◽  
Earth Pressure ◽  
Reinforced Concrete Slab ◽  
The Earth ◽  
Filling Height ◽  
Test Points ◽  
Better Than

To analyze the earth pressure of corrugated steel culvert under high fill embankment, a field test was taken and the change law was got with the filling height increasing, the force state when geotechnical grilles were laid on the top of corrugated steel culvert was compared to that of reinforced concrete slab culvert. Results show that the pressure on the top of corrugated steel culvert is smaller than that on the external in same level when test points are near to culvert, the values of test points above and below geotechnical grilles are close, and the pressure of corrugated steel culvert is smaller than that of reinforced concrete slab culvert when filling height is above 7.3 m. So analysis indicates corrugated steel culvert spreads the upper load better, the geotechnical grille can reduce the pressure effectively through earth pressure redistribution, and the mechanical property of corrugated steel culvert is better than reinforced concrete slab culvert under high fill embankment.

Sign in / Sign up

Export Citation Format

Share Document