Measurement and numerical analysis of influence of key stratum breakage on mine pressure in top-coal caving face with super great mining height

2017 ◽  
Vol 24 (8) ◽  
pp. 1881-1888 ◽  
Author(s):  
Meng Li ◽  
Ji-xiong Zhang ◽  
Yan-li Huang ◽  
Rui Gao
Keyword(s):  
Numerical Analysis ◽  
Mine Pressure ◽  
Key Stratum ◽  
Mining Height

scholarly journals Research on Surface Failure Law of Working Faces in Large Mining Height and Shallow Buried Coal Seam

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Zhenhua Li ◽  
Yingkun Pang ◽  
Yongsheng Bao ◽  
Zhanyuan Ma
Keyword(s):  
Near Field ◽  
Mining Area ◽  
Surface Cracks ◽  
Large Space ◽  
Key Strata ◽  
Key Stratum ◽  
Surface Failure ◽  
Working Face ◽  
Large Mining Height ◽  
Mining Height

In the process of high-intensity and large-space mining in Shendong mining area, various surface cracks are generated on the surface, resulting in serious damage to the surface buildings and the local ecological environment. To study the influence of overlying rock movement on surface failure of near-field single key strata of near-shallow buried and large mining height working face, the relationship between overburden movement, strata pressure appearance, and surface failure at working face 52307 in Daliuta mining area was analyzed by field measurement and numerical simulation. The results show the following: (1) there is only one thick and hard key stratum in the overburden of large mining height and near-shallow buried working face. Under the condition of presplitting roof blasting, the first weighting step is still as high as 95 m, and the periodic breaking step of roof is 20–30 m. During the weighting, the working resistance of support is still close to the rated resistance. (2) The single key stratum plays an obvious role in controlling overburden movement. After the first weighting of the working face, a stepped subsidence crack appears on the surface within a short time, and the crack lags behind the working face for about 5 m. (3) During each periodic weighting process, the breaking and subsidence of key blocks are accompanied by surface cracks.

Numerical Analysis on Ground Pressure Feature in Fully Mechanized Coal Face

2013 ◽  
Vol 807-809 ◽  
pp. 2299-2303
Author(s):  
Wei Jian Yu ◽  
Tao Feng ◽  
Gang Ye Guo
Keyword(s):  
Numerical Analysis ◽  
Abutment Pressure ◽  
Numerical Procedure ◽  
Wall Rock ◽  
Coal Face ◽  
Distribution Form ◽  
Ground Pressure ◽  
Working Face ◽  
Set Up ◽  
Mining Height

Base on the fully mechanized coal face of 8113 (1) in LaoYingSan mine, numerical analysis method was applied to analyze the ground pressure feature, FLAC software is carried out to set up numerical model, and offer numerical procedure. The mining abutment pressure distribute form and its partition in front of fully mechanized working face. All four different mining height (2.6m2.8m3.0m3.2m) was respectively calculated. In addition, the influence of mining speed to mining abutment pressure and intervals is analyzed, four different mining distance (20m30m40m50m) selected separately. Afterwards, the different solution analyzed respectively, these results show that the mining abutment pressure distribution form in front of fully mechanized working face essentially identical, they including the stress increasing zones, the stress decreasing zones and the initial rock stress stable field. The influence of mining pace to wall rock looseness range greater than mining height.

A Study on the Roof Fracture Mechanism of Large Cutting Height Workface in Shallow Thick Coal Seam

2011 ◽  
Vol 347-353 ◽  
pp. 183-188 ◽  
Author(s):  
Ping Wei Xing ◽  
Xuan Min Song ◽  
Yu Ping Fu
Keyword(s):  
Coal Seam ◽  
Mechanical Model ◽  
Calculation Formula ◽  
Thick Coal Seam ◽  
Key Stratum ◽  
Horizontal Pressure ◽  
Working Resistance ◽  
Cutting Height ◽  
Theoretical Results ◽  
Mining Height

Based on the high mining height of large cutting height workface in shallow thick coal seam and the few falling waste rock in goaf, the key roof can not be supported effectively, the facture mechanical model of key roof was established. The theoretical calculation formula of key stratum fracture step and working resistance of support were obtained by using fracture mechanics. The results show that the fracture step of key roof relate to not only the mechanical character of key roof and the load of overlaying rock seam, but also the working resistance of support and horizontal pressure in key roof. The reasonable working resistance of support and the step of roof fracture were analyzed in 1-2coalmine 51104 face of a mine in Dongsheng area. The theoretical results are well agreeable with the field measured results.

scholarly journals Control of Gob-Side Roadway with Large Mining Height in Inclined Thick Coal Seam: A Case Study

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Xie Fuxing
Keyword(s):  
Numerical Simulation ◽  
Coal Pillar ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Mine Pressure ◽  
Thick Coal Seam ◽  
Working Face ◽  
Rock Structure ◽  
Large Mining Height ◽  
Mining Height

The gob-side roadway of 130205, a large-mining-height working face in the Yangchangwan coal mine, was investigated in terms of the mine pressure law and support technology for large mining heights and narrow coal pillars for mining roadways. The research included field investigations, theoretical analysis, numerical simulation, field tests, and other methods. This paper analyzes the form of movement for overlying rock structure in a gob-side entry with a large mining height and summarizes the stress state and deformation failure characteristics of the surrounding rock. The failure mechanism of the surrounding rock of the gob-side roadway and controllable engineering factors causing deformation were analyzed. FLAC3D numerical simulation software was used to explore the influence law of coal pillar width, working face mining height, and mining intensity on the stability of the surrounding rock of the gob-side roadway. Ensuring the integrity of the coal pillar, improving the coordination of the system, and using asymmetric support structures as the core support concept are proposed. A reasonably designed support scheme for the gob-side roadway of the working face for 130205 was conducted, and a desirable engineering effect was obtained through field practice verification.

scholarly journals Key Stratum Structure and Support Working Resistance of Longwall Face with Large Mining Height in the Shallow Coal Seams, China

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Qingxiang Huang ◽  
Jinlong Zhou ◽  
Jian Cao
Keyword(s):  
Coal Seam ◽  
Physical Simulation ◽  
Longwall Face ◽  
Beam Structure ◽  
Key Stratum ◽  
Immediate Roof ◽  
Large Mining Height ◽  
Shallow Coal Seam ◽  
Working Resistance ◽  
Mining Height

The fully mechanized mining with large mining height is the main method for high yield and efficient coal mining in China. The key stratum structure (KSS) is the basis of revealing the mechanism of roof weighting and determination of support working resistance of the longwall face with large mining height (LFLMH) in the shallow coal seam. The height of the caving zone at LFLMH is large, the thick immediate roof forms the “short cantilever beam” structure commonly, and the hinge layer of the overlying key stratum will move upward to the higher position. The “high position oblique step voussoir beam” structure of single-key stratum (SKS) and “oblique step voussoir beam and voussoir beam” structure of double-key stratum (DKS) in the shallow coal seam were proposed with physical simulation and Universal Distinct Element Code (UDEC). The analysis of the KSS and numerical simulation reveals the mechanism of strong roof weighting at the SKS longwall face and large-small alternate periodic weighting at the DKS longwall. It is concluded that the large static load caused by the “equivalent immediate roof (EIR)” is the basic load, and the instability load of the KSS is the additional dynamic load of support. Besides, the calculation methods of the reasonable support working resistance at LFLMH were obtained and verified with engineering applications.

scholarly journals Research on the Influence of the Key Stratum Position on the Support Working Resistance during Large Mining Height Top-Coal Caving Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Baisheng Zhang ◽  
Zhiping Yang ◽  
Chunxu Ji ◽  
Zefeng Guo ◽  
Haoyang Li
Keyword(s):  
Mining Method ◽  
Thick Coal Seam ◽  
Key Stratum ◽  
Movement Characteristics ◽  
Geological Conditions ◽  
Large Mining Height ◽  
Working Resistance ◽  
Mining Height ◽  
Overlying Strata ◽  
Layer Position

In recent years, in order to increase the coal recovery rate, the large mining height fully mechanized top-coal caving mining has been widely used because it has the advantages of both fully mechanized mining method and large mining height mining method. When this mining technology is used to exploit thick coal seam under upper goaf, the movement characteristics of the overlying strata and the bearing structure formed by the broken rock are complicated, which results in the abnormal pressure during mining, such as severe coal slabs and hydraulic supports being crushed. The key to solve these problems is to study the movement law and the structural evolution characteristics of the overlying strata during large mining height fully mechanized top-coal caving mining, and the movement characteristics of the overlying strata are all determined by the layer-position of the key stratum. UDEC models with different layer-position of the key stratum are established to investigate the influence of the key stratum position on the support working resistance during large mining height top-coal caving mining. Through comprehensive research, the source of support resistance comes from under different geological conditions was analyzed, and the formula for estimating the maximum support working resistance was deduced. In addition, in order to release the severe pressure during large mining height fully mechanized top-coal caving mining, it is recommended to use hydraulic fracturing method to weaken the key stratum in situ.

scholarly journals Influence of Valleys Terrain on Pressure of Fully Mechanized Working Faces in Shallow Coal Seams

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
YingJie Liu ◽  
Qingjie Qi ◽  
Anhu Wang
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Rock Fracture ◽  
Mine Pressure ◽  
Overburden Rock ◽  
Coal Seams ◽  
Valley Bottom ◽  
Key Stratum ◽  
Seam Mining ◽  
The Impact

The absence of a key stratum during overburden rock movement is crucial to the mining pressure of fully mechanized coal mining faces. Using physical and numerical simulations, the 21304 mechanized mining in Daliuta and Huojitu coal mining faces 1−2 appeared twice during a pressure frame accident analysis. The results indicate that a lack of key overlying strata is crucial to the mining of lower coal seams, particularly for the upper sections of a single key stratum of coal. When the key stratum of the upper coal seam is absent, a stable masonry structure is formed after mining. It is easy to form stable stacked strata at the bottom of a coal seam. When developing gullies in deep terrains, the formation of the key stratum will be an upper rock fracture affected by the impact, resulting in a partial absence of the key stratum. When the key stratum is absent, the mining of upslope working faces and the probability of dynamic strata pressure increase with the overburden on the working face and mining of downslope faces. The face mine pressure development laws on the upper and lower coal seam mining were similar, mainly manifesting as “slope section >valley bottom section >back slope section.”

Sign in / Sign up

Export Citation Format

Share Document