Effect of ultraviolet mutagenesis on heterotrophic strain mutation and bioleaching of low grade copper ore

2017 ◽  
Vol 24 (10) ◽  
pp. 2245-2252 ◽  
Author(s):  
Ai-xiang Wu ◽  
Kai-jian Hu ◽  
Hong-jiang Wang ◽  
Ai-qing Zhang ◽  
Ying Yang
2017 ◽  
Vol 262 ◽  
pp. 185-188 ◽  
Author(s):  
Alison Cox ◽  
Christopher G. Bryan

Previous agglomerate-scale heap bioleaching studies have outlined the variations in cell numbers of the liquid and attached phases during colonisation of sterilised ore by a pure culture. In this study, a mixed mesophilic culture was used in agglomerate-scale columns containing non-sterilised low-grade copper ore. Over a six - month period, columns were harvested at various intervals to provide snapshots of the metal distribution and the quantity, location, and ecological variations of mineral-oxidizing microbes within the ore bed. The initial colonisation period in this experiment was dissimilar to previous work, as the indigenous community was retained within the ore-bed throughout acid agglomeration. The overall colonisation phase lasted for approximately 1,000 hours until cell concentrations stabilised. In each column, less than 0.05% of the total cells were found in the leachate, 15-20% in the interstitial phase and the remaining ~80% were attached to the mineral surface. Once cell numbers had stabilised, interstitial cell concentrations were approximately 2,000× greater than those in the leachate. This difference persisted for the duration of the experiment. Copper concentrations in the two liquid phases generally decreased over time, but were on average 50× higher in the interstitial phase. Iron concentrations were more stable, but again were 30× higher in the interstitial phase. This demonstrates that that the difference in cell concentration between the leachate and interstitial phases cannot be explained through diffusion gradients within the system as it is much greater than those observed for the dissolved metals. It also shows that the specific environmental conditions of the interstitial and attached cells are very different to those inferred through analysis of leachates alone.


2009 ◽  
Vol 71-73 ◽  
pp. 409-412
Author(s):  
Wen Qing Qin ◽  
Yan Sheng Zhang ◽  
Shi Jie Zhen ◽  
Jun Wang ◽  
Jian Wen Zhang ◽  
...  

The effects of several variables on the column bioleaching of copper sulphide ore have been investigated. The copper ore contained chalcopyrite as the main sulfide minerals and bornite and chalcocite as the minor minerals. The experiment was carried out using bench-scale column leach reactors designed in Key Lab of Biometallurgy of Ministry of Education, which were inoculated with the pure mesophile bacteria (Acidithiobacillus ferrooxidans) and thermophile bacteria (Sulfobacillus), respectively, and the mixed bacteria which contain both iron- and sulfur-oxidizing bacteria. The results show that the mixed cultures were more efficient than the pure cultures alone and the maximum copper recovery 53.64% was achieved using the mixed cultures after 85 days. The leaching rate of chalcopyrite tended to increase with the increased dissolved ferric iron concentration. The effect of particle size on the rate of the copper leaching was also investigated, and it was shown that the copper bioleaching rate decreases as the amount of fines increase, which limits the permeability, thus decreases leaching rate. Jarosite and elemental sulphur formed in the column were characterized by the X-ray and EDS.


2017 ◽  
Vol 64 (1) ◽  
pp. 3-14 ◽  
Author(s):  
Baisui HAN ◽  
Batnasan ALTANSUKH ◽  
Kazutoshi HAGA ◽  
Yasushi TAKASAKI ◽  
Atsushi SHIBAYAMA

2017 ◽  
Vol 262 ◽  
pp. 202-206 ◽  
Author(s):  
Víctor J. Zepeda ◽  
Ivan Nancucheo ◽  
Milton Guillen ◽  
Enrique Becerra ◽  
Camila Escuti ◽  
...  

Flotation tailings are hazardous due to physical and chemical instability and are currently considered one of the main pollution concerns of mining industry. Most of these tailings are fine-grained residues with low copper content (0.1-0.8%) and include toxic compounds, such as heavy metals, arsenic, and flotation reagents, among others. Another hazard is the generation of acid mine drainage (AMD) due to biological oxidation of tailings. On the other hand, low-grade ore is challenging the mining industry to commercially produce copper.The main objective of this work was to assess the use of flotation tailings and low-grade ore to produce a biologically-produced copper sulfide, as a product for further pyrometallurgical or fine chemistry processing. Low-grade ore and flotation tailings were first agglomerated at different proportions and leaching tests were performed in 1m columns, using either industrial or synthetic raffinate solution. Then, the PLS solution obtained from the column tests was subjected to selective precipitation of copper by using biogenic hydrogen sulfide (H2S) generated by a mixed culture of neutrophilic sulfate reducing bacteria (SRB), enriched from sediments of Caracarani river (located at 4,600 m over sea level in northern Chile).Over 91% of the copper soluble present in the PLS was recovered as copper sulfide in 28 days, while ferrous iron, other metals and arsenic remained in solution. Analysis performed by XRD confirmed the presence of copper in the precipitate (58% as covellite). This work demonstrates the possibility to apply bioleaching and bio-precipitation technologies to treat tailings and low-grade copper ore to produce a high quality copper sulfide.


2014 ◽  
Vol 1010-1012 ◽  
pp. 1630-1635
Author(s):  
Jian Gang Ku ◽  
Hui Huang Chen ◽  
Wen Yuan Liu

The copper ore, which has fine-grained nature and differences in the degree of mineral dissemination, is a kind of low grade sulfide minerals. Tests indicate that not only the grinding fineness but also the combination mode of depressants is one of the most important factors to improve the concentrate grade index. Additionally, according to tests conducted with dosage of lime, the rougher flotation should be operated at a pH of 11. Furthermore, all the depressants used were effective to increase the concentrate grade. By the closed-circuit micro-flotation experiment, satisfied grade index (18.7%Cu with 81% recovery) of the final concentrate was achieved, which could provide reference in industrial applications.


1999 ◽  
Vol 35 (5) ◽  
pp. 437-440 ◽  
Author(s):  
B. Nasernejad ◽  
T. Kaghazchi ◽  
M. Edrisi ◽  
M. Sohrabi
Keyword(s):  

2013 ◽  
Vol 734-737 ◽  
pp. 929-934
Author(s):  
Qi Nie ◽  
Xiao Si Zhou ◽  
Fen Lan Peng ◽  
Xu Shen ◽  
Zhi Zhang Li

Based on the analysis of the properties of the copper ore from Jinggu area in Yunnan province, a suitable technical route was presented for processing of eligible copper concentrate and the main factors i.e. grinding fineness, Na2S dosage and collector dosage, affecting the quality of roughing concentration was investigated. On this basis, a close-circuit flotation test scheme was preceded, which obtained a high quality copper concentrate with Cu grade of 16.08%, copper recovery of 58.52%. The recovery of copper concentrate is much lower than the Cu recovery of roughing concentrate from the condition experiments. This may be contributed to the fact that fine slime carried by middling worsens the separation of copper minerals and gangues. The Mo was enriched in concentrate, which is significantly considered to recovery in further work.


Sign in / Sign up

Export Citation Format

Share Document