High-power Yb-doped continuous-wave and pulsed fibre lasers

Pramana ◽  
2014 ◽  
Vol 82 (1) ◽  
pp. 15-27 ◽  
Author(s):  
B N UPADHYAYA
2022 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhiyue Zhou ◽  
Zefeng Wang ◽  
Wei Huang ◽  
Yulong Cui ◽  
Hao Li ◽  
...  

AbstractFibre lasers operating at the mid-IR have attracted enormous interest due to the plethora of applications in defence, security, medicine, and so on. However, no continuous-wave (CW) fibre lasers beyond 4 μm based on rare-earth-doped fibres have been demonstrated thus far. Here, we report efficient mid-IR laser emission from HBr-filled silica hollow-core fibres (HCFs) for the first time. By pumping with a self-developed thulium-doped fibre amplifier seeded by several diode lasers over the range of 1940–1983 nm, narrow linewidth mid-IR emission from 3810 to 4496 nm has been achieved with a maximum laser power of about 500 mW and a slope efficiency of approximately 18%. To the best of our knowledge, the wavelength of 4496 nm with strong absorption in silica-based fibres is the longest emission wavelength from a CW fibre laser, and the span of 686 nm is also the largest tuning range achieved to date for any CW fibre laser. By further reducing the HCF transmission loss, increasing the pump power, improving the coupling efficiency, and optimizing the fibre length together with the pressure, the laser efficiency and output power are expected to increase significantly. This work opens new opportunities for broadly tunable high-power mid-IR fibre lasers, especially beyond 4 μm.


1997 ◽  
Vol 33 (19) ◽  
pp. 1635 ◽  
Author(s):  
D.Z. Garbuzov ◽  
R.J. Menna ◽  
R.U. Martinelli ◽  
J.H. Abeles ◽  
J.C. Connolly

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 78
Author(s):  
Anye Wang ◽  
Jian Zhang ◽  
Shuai Ye ◽  
Xiaofei Ma ◽  
Baiyi Wu ◽  
...  

Single-crystal fibers (SCFs) have a great application potential in high-power lasers due to their excellent performance. In this work, high-quality and crack-free Yb3+:Lu3Al5O12 (Yb:LuAG) SCFs were successfully fabricated by the micro-pulling-down (μ-PD) technology. Based on the laser micrometer and the X-ray Laue diffraction results, these Yb:LuAG SCFs have a less than 5% diameter fluctuation and good crystallinity along the axial direction. More importantly, the distribution of Yb ions is proved to be uniform by electron probe microanalysis (EPMA) and the scanning electron microscope (SEM). In the laser experiment, the continuous-wave (CW) output power using a 1 mm diameter Yb:LuAG single-crystal fiber is determined to be 1.96 W, at the central wavelength of 1047 nm, corresponding to a slope efficiency of 13.55%. Meanwhile, by applying a 3 mm diameter Yb:LuAG SCF, we obtain a 4.7 W CW laser output at 1049 nm with the slope efficiency of 22.17%. The beam quality factor M2 is less than 1.1 in both conditions, indicating a good optical quality of the grown fiber. Our results show that the Yb:LuAG SCF is a potential solid-state laser gain medium for 1 μm high-power lasers.


2021 ◽  
pp. 1-1
Author(s):  
Jianxun Wang ◽  
Yixin Wan ◽  
Xinjie Li ◽  
Qiang Liu ◽  
Hao Li ◽  
...  

2012 ◽  
Vol 37 (24) ◽  
pp. 5049 ◽  
Author(s):  
Kavita Devi ◽  
S. Chaitanya Kumar ◽  
M. Ebrahim-Zadeh

2015 ◽  
Vol 43 (10) ◽  
pp. 3599-3607 ◽  
Author(s):  
Manmath Kumar Badapanda ◽  
Akhilesh Tripathi ◽  
Rinki Upadhyay ◽  
Mahendra Lad ◽  
Pundalik R. Hannurkar

2009 ◽  
Vol 34 (17) ◽  
pp. 2563 ◽  
Author(s):  
J. T. Green ◽  
D. E. Sikes ◽  
D. D. Yavuz
Keyword(s):  

2021 ◽  
Author(s):  
Camille Petite ◽  
Antonin Moreau ◽  
Hélène Krol ◽  
Catherine Grèzes-Besset ◽  
Julien Lumeau ◽  
...  

Laser Physics ◽  
2021 ◽  
Vol 32 (2) ◽  
pp. 025801
Author(s):  
Xiangrui Liu ◽  
Zhuang Li ◽  
Chengkun Shi ◽  
Bo Xiao ◽  
Run Fang ◽  
...  

Abstract We demonstrated 22 W LD-pumped high-power continuous-wave (CW) deep red laser operations at 718.5 and 720.8 nm based on an a-cut Pr3+:YLF crystal. The output power of both polarized directions reached the watt-level without output power saturation. A single wavelength laser operated at 720.8 nm in the π-polarized direction was achieved, with a high output power of 4.5 W and high slope efficiency of approximately 41.5%. To the best of our knowledge, under LD-pumped conditions, the laser output power and slope efficiency are the highest at 721 nm. By using a compact optical glass plate as an intracavity etalon, we suppressed the π-polarized 720.8 nm laser emission. And σ-polarized single-wavelength laser emission at 718.5 nm was achieved, with a maximum output power of 1.45 W and a slope efficiency of approximately 17.8%. This is the first time that we have achieved the σ-polarized laser emission at 718.5 nm generated by Pr3+:YLF lasers.


Sign in / Sign up

Export Citation Format

Share Document