scholarly journals Optimizing productivity in oil rims: simulation studies on horizontal well placement under simultaneous oil and gas production

2020 ◽  
Author(s):  
Oluwasanmi Olabode ◽  
Sunday Isehunwa ◽  
Oyinkepreye Orodu ◽  
Daniel Ake
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
Horizontal Wells ◽  
Gas Production ◽  
Gas Oil ◽  
Reservoir Properties ◽  
Well Placement ◽  
Hydrocarbon Production ◽  
Oil And Gas Production ◽  
Oil Rim

AbstractThin oil rim reservoirs are predominantly those with pay thickness of less than 100 ft. Oil production challenges arise due to the nature of the gas cap and aquifer in such reservoirs and well placement with respect to the fluid contacts. Case studies of oil rim reservoir and operational properties from the Niger-Delta region are used to build classic synthetic oil rim models with different reservoir parameters using a design of experiment. The black oil simulation model of the ECLIPSE software is activated with additional reservoir properties and subsequently initialized to estimate initial oil and gas in place. To optimize hydrocarbon production, 2 horizontal wells are initiated, each to concurrently produce oil and gas. Well placements of (0.5 ft., 0.25 ft. and 0.75 ft.) are made with respect to the pay thickness and then to the fluid contacts. The results show that for oil rim with bigger aquifers, an oil recovery of 8.3% is expected when horizontal wells are placed at 0.75 ft. of the pay thickness away from the gas oil contact, 8.1% oil recovery in oil rims with larger gas caps with completions at 0.75 ft. of the pay zone from the gas oil contacts, 6% oil recovery with relatively small gas caps and aquifer and 9.3% from oil rims with large gas caps and aquifers, with completions at mid-stream of the pay zone.

scholarly journals DEVELOPMENT OF METHODS OF INCREASING OIL RECOVERY OF FIELDS IN THE CHECHEN REPUBLIC

2021 ◽  
Author(s):  
А.А. Умаев ◽  
А-М.Б. Измаилов ◽  
Т-А.У. Мусаев ◽  
А.Ш. Халадов
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
Gas Production ◽  
North Caucasus ◽  
Reservoir Properties ◽  
Oil And Gas Production ◽  
The North ◽  
Geological Conditions ◽  
Temperature And Pressure ◽  
The Impact

Наряду с совершенствованием эксплуатации скважин и повышением продуктивности за счет работ по воздействию на призабойную зону пласта, одним из главных вопросов является повышение нефтеотдачи пласта. Актуальность этих вопросов не вызывает сомнения применительно к месторождениям Северного Кавказа. Особенные геологическиеусловия присущие продуктивным пластам Чеченской республики (большая глубина залегания, высокая температура и давление, неоднородность коллекторских свойств и т.д.) затрудняют или полностью исключают возможность применения известных методов физико-химического воздействия на пласты с целью интенсификации отборов нефти и повышения нефтеотдачи. На нефтегазодобывающих объектах ЧР применялись основные физико-химические, тепловые и гидродинамические методы повышения нефтеотдачи пластов Along with improving the operation of wells and increasing productivity due to the work on the impact on the bottomhole formation zone, one of the main issues is the increase in oil recovery. The relevance of these issues does not raise doubts in relation to the fields of the North Caucasus. The special geological conditions inherent in the productive formations of the Chechen Republic (large depth, high temperature and pressure, heterogeneity of reservoir properties, etc.) make it difficult or completely exclude the possibility of using known methods of physicochemical treatment of formations in order to intensify oil production and increase oil recovery. The main physical, chemical, thermal and hydrodynamic methods of enhanced oil recovery were used at oil and gas production facilities in the Chechen Republic

Achieving Indonesian Oil and Gas production to 1 million barrels per day by 2030 using Nanoflooding as Novel EOR Method: Dream vs. Reality

2021 ◽  
Author(s):  
L. Hendraningrat
Keyword(s):  
Oil Recovery ◽  
Cost Efficiency ◽  
Oil And Gas ◽  
Gas Production ◽  
Oil Price ◽  
Efficient Manner ◽  
Oil And Gas Production ◽  
Cost Efficient ◽  
Nano Size ◽  
Production Target

In low oil price environments, conducting affordable enhanced oil recovery (EOR) projects can be very challenging. One item of interest for successful future EOR should be in how produced fluids are treated and how to achieve cost-efficiency. Nanoflooding, is an emerging EOR technique, which has attracted deployment in recent years. Meanwhile, Indonesia continues to progress towards the national oil and gas production target of one million barrels per day by 2030. This paper presents the observation of opportunities and challenges of using nanoflooding to enable oil and gas production in Indonesia to achieve its desired targets. The study began by mapping the pain points in major oilfields in Indonesia. We observed and discussed the advantage and limitation of traditional mature EOR techniques, status, and ongoing application of EOR in Indonesia. Then, we briefly explained the main reasons why nanoflooding can be considered for future implementation in accelerating oil production in Indonesia, including a discussion about a successful pilot test. As an emerging EOR technique, nanoflooding can be considered as a cost-efficient technique. Silica-based nanofluid can be accessed in a cost-efficient manner and can be executed from an implementation standpoint considering surface facilities. The mechanism that is introduced can help to displace incremental oil more effectively since it can go inside pore throats due to the nano-size. We observed several recognized benefits and challenges to deploy nanoflooding in Indonesia. Based on this study, nanoflooding is very attractive and has potential to be implemented.

scholarly journals A REVIEW OF NANOTECHNOLOGY APPLICATIONS IN THE OIL AND GAS INDUSTRIES

2019 ◽  
pp. 1-14
Author(s):  
B.M. Das ◽  
D. Dutta
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
New Technology ◽  
Minimum Cost ◽  
Gas Production ◽  
Oil Fields ◽  
Drilling Fluids ◽  
Oil And Gas Production ◽  
Exploration And Production ◽  
Exploration Drilling

Nanotechnology encompasses the science and technology of objects with sizes ranging from 1 nm to 100 nm. Today, exploration and production from conventional oil and gas wells have reached a stage of depletion. Newer technologies have been developed to address this problem. Maximum oil production at a minimum cost is currently a huge challenge. This paper reviews nanotechnology applications in the oil and gas production sector, including in the fields of exploration, drilling, production, and waste management in oil fields, as well as their environmental concerns. The paper reviews experimental observations carried out by various researchers in these fields. The effect of various nanoparticles, such as titanium oxide, magnesium oxide, zinc oxide, copper oxide, and carbon nanotubes in drilling fluids and silica nanoparticles in enhanced oil recovery, has been observed and studied. This paper gives a detailed review of the benefits of nanotechnology in oil exploration and production. The fusion of nanotechnology and petroleum technology can result in great benefits. The physics and chemistry of nanoparticles and nanostructures are very new to petroleum technology. Due to the greater risk associated with adapting new technology, nanotechnology has been slow to gain widespread acceptance in the oil and gas industries. However, the current economic conditions have become a driving force for newer technologies.

Simultaneous Hydraulic Fracturing Improves Completion Efficiency and Lowers Costs Per Foot

2021 ◽  
Author(s):  
David Russell ◽  
Price Stark ◽  
Sean Owens ◽  
Awais Navaiz ◽  
Russell Lockman
Keyword(s):  
Hydraulic Fracturing ◽  
Oil And Gas ◽  
Horizontal Wells ◽  
Asset Returns ◽  
Gas Production ◽  
Well Performance ◽  
Additional Time ◽  
Oil And Gas Production ◽  
Single Well ◽  
Lateral Length

Abstract Reducing well costs in unconventional development while maintaining or improving production continues to be important to the success of operators. Generally, the primary drivers for oil and gas production are treatment fluid volume, proppant mass, and the number of stages or intervals along the well. Increasing these variables typically results in increased costs, causing additional time and complexity to complete these larger designs. Simultaneously completing two wells using the same volumes, rates, and number of stages as for any previous single well, allows for more lateral length or volume completed per day. This paper presents the necessary developments and outcomes of a completion technique utilizing a single hydraulic fracturing spread to simultaneously stimulate two or more horizontal wells. The goal of this technique is to increase operational efficiency, lower completion cost, and reduce the time from permitting a well to production of that well—without negatively impacting the primary drivers of well performance. To date this technique has been successfully performed in both the Bakken and Permian basins in more than 200 wells, proving its success can translate to other unconventional fields and operations. Ultimately, over 200 wells were successfully completed simultaneously, resulting in a 45% increase in completion speed and significant decrease in completion costs, while still maintaining equivalent well performance. This type of simultaneous completion scenario continues to be implemented and improved upon to improve asset returns.

Design of Sand Washing and Plug Removal Device with High Pressure Foam Fluid Jet

2012 ◽  
Vol 155-156 ◽  
pp. 722-725
Author(s):  
Wen Bin Cai ◽  
Guo Wei Qin ◽  
Yan He
Keyword(s):  
High Pressure ◽  
Oil And Gas ◽  
Horizontal Wells ◽  
Gas Production ◽  
Oil Field ◽  
Good Effect ◽  
Well Bore ◽  
Sand Production ◽  
Oil And Gas Production ◽  
And Performance

In the oil and gas production process, serious sand production causes reservoir and pipe blocked, which makes productivity declined, even stopped. It's the efficient means of sand washing and plug removal by using high-pressure foam fluid jet. The structure and performance of sand washing device determines the efficiency of sand washing and plug removal. The device's nozzle consists of anti-blocking valves, three kinds of nozzles with self-drive, rotation characteristics during the operation. The nozzles include sand washing nozzle, couple nozzle and power nozzle. This device can be used in horizontal wells with complex well bore situation to carry out sand and plug removal. The device has a good effect on sand washing and plug removal in the oil field.

Research and Application of the Deep Horizontal Drilling and Completion Technology for Liaohe Oilfield Buried Hill Reservoir

2012 ◽  
Vol 241-244 ◽  
pp. 1396-1399
Author(s):  
Gui Min Nie ◽  
Dan Guo ◽  
Yan Wang ◽  
Xiao Wei Cheng
Keyword(s):  
Oil And Gas ◽  
Drilling Fluid ◽  
Horizontal Wells ◽  
Gas Production ◽  
Oil Field ◽  
Oil And Gas Production ◽  
Horizontal Drilling ◽  
Liaohe Oilfield ◽  
Buried Hill ◽  
Composite Drilling

With the depletion of shallow-layer oil and gas pools inLiaohe oilfield, buried hill stratigraphic reservoirs in Liaohe oil field are becoming main objectives for exploration in recent years, especially in high-risk areas of Xinglongtai deep the Hing ancient buried hill resources are particularly rich. Since 2007, Liaohe oilfield increased investment for Buried Hill reservoirs with deep horizontal drilling developt the buried hill reservoir. Liaohe has completed 36 deep horizontal, with a total footage of 183920m, the average depth of 5109m. Improving drilling speed of "buried hill deep horizontal and branch horizontal wells”, and reducing drilling costs are of great urgency. “Hing buried hill deep horizontal, horizontal wells,” with composite drilling technology, supporting the optimization of PDC bits, the high-pressure jet drilling, the MWD borehole trajectory control and optimization of drilling parameters, the new drilling fluid technology and so on. With a large number of horizontal wells put into Buried Hill stratigraphic reservoirs, oil and gas production of average deep horizontal well increase of 2-5 times. Besides, the previous recovery and production of oil and gas reservoirs significantly improved to create an objective economic and social benefits.

Technology road map for the low-carbon production of hydrocarbons

2020 ◽  
Vol 60 (2) ◽  
pp. 583
Author(s):  
Clare Anderson
Keyword(s):  
Carbon Emissions ◽  
Oil And Gas ◽  
Gas Production ◽  
Low Carbon ◽  
Intergovernmental Panel ◽  
Hydrocarbon Production ◽  
Oil And Gas Production ◽  
Road Map ◽  
Net Zero

The Paris Agreement, signed in 2016, has the objective of limiting the global temperature rise to 1.5°C to substantially reduce the effects of climate change. To achieve this objective, significant and unprecedented deep cuts in carbon emissions are required, as set out in the Intergovernmental Panel on Climate Change’s special report on Global Warming of 1.5°C released in October 2018. To enable this ambitious target, global reductions in carbon emissions will need to be markedly reduced to an average of net zero by 2050 and, as such, will have profound effects on hydrocarbon (oil and gas) production in the coming decades. This paper presents a road map of opportunities for the reduction of carbon emissions from hydrocarbon production, specifically natural gas. It includes technologies for reducing carbon emissions from process streams and utility streams. A case study is used to illustrate the opportunities, along with a discussion on technology readiness for several options.

Exploitation of oil and gas fields by horizontal wells

2021 ◽  
Author(s):  
Andrey Serebryakov ◽  
Gennadiy Zhuravlev
Keyword(s):  
Oil And Gas ◽  
Horizontal Wells ◽  
Gas Production ◽  
Federal State ◽  
Oil And Gas Production ◽  
Oil And Gas Fields ◽  
Bottom Hole ◽  
Production Wells ◽  
State Educational ◽  
Gas Fields

The textbook describes the design features of offshore horizontal multi-hole production wells, as well as the bottom-hole components of horizontal multi-hole wells. The classification of complications of multi-hole horizontal wells, methods of their prevention and elimination are given. Methods of underground geonavigation of the development of offshore horizontal production wells are proposed. The geological and field bases of operation of horizontal offshore multi-hole oil and gas wells, modes and dynamics of oil, gas and associated water production, methods for calculating dynamic bottom-hole and reservoir pressures are specified. The technologies of operation of offshore horizontal multi-hole wells are presented. The composition and scope of environmental, field and research marine monitoring of the operation of offshore horizontal multi-hole wells and the protection of the marine environment in the production of oil and gas are justified. Meets the requirements of the federal state educational standards of higher education of the latest generation. It is intended for undergraduates of the enlarged group of "Earth Sciences" training areas, as well as for teachers, employees of the fuel and energy complex, industrial geological exploration and oil and gas production enterprises, scientific and design organizations.

scholarly journals Synergetics of geological mediums and its impact on the effectiveness of the exploitation and exploration for mineral deposits

2019 ◽  
pp. 15-21
Author(s):  
Yu. I. Voitenko
Keyword(s):  
Gas Flow ◽  
Oil And Gas ◽  
Solid Phase ◽  
Dynamic Effect ◽  
Gas Production ◽  
Reservoir Properties ◽  
Uniform Compression ◽  
Reduced Pressure ◽  
Oil And Gas Production ◽  
Joint Influence

The mechanisms of joint influence of mountain and reservoir pressures, saturating fluid, structure elements of rocks and external dynamic effects on their behavior in natural conditions, in particular near of the well, are investigated. With specific examples, it is shown that the behavior of rocks with such a set of influencing factors is determined by the laws of synergetics and the combined action of external influences, uneven stress-strain state of the rocks, the pore pressure and chemo mechanical effects. Examples are the results of gas-flow and gas-metric studies of closed wells, as well as the results of explosive perforation and intensification of producing wellbores at different depths. Defects occurrence in minerals with a high modulus of elasticity is initiated by an external dynamic effect and independently under the action of the saturating fluid. Then, under volumetric non-uniform compression and reservoir pressure, gradual fracturing of terrigenous rocks occurs at the micro and macro level. The result of these processes is the formation of areas of the improved permeability near the wells during drilling, production and suspending. When drilling on traditional technology they will impair formation reservoir properties via infiltration of water and solid phase. In oil and gas wells and in closed wells - improve these properties. Analysis of the behavior of rocks from the synergetic position shows that the best mode of loading on the reservoir during wells drilling, wells completion and oil and gas production is depression (reduced pressure) on the reservoir. The known and new promising technologies for the intensification of oil and gas production are determined.

Sign in / Sign up

Export Citation Format

Share Document