Dynamic responses of a continuous beam railway bridge under moving high speed train with random track irregularity

2014 ◽  
Vol 14 (4) ◽  
pp. 797-810 ◽  
Author(s):  
Di Mu ◽  
Dong-Ho Choi
Keyword(s):  
High Speed ◽  
Dynamic Responses ◽  
Continuous Beam ◽  
Railway Bridge ◽  
High Speed Train ◽  
Track Irregularity

scholarly journals Analysis study the used of Tuned Mass Damper (TMD) on an existing train bridge due to high speed train with moving mass load approach

2019 ◽  
Vol 258 ◽  
pp. 05005 ◽  
Author(s):  
Wivia Octarena Nugroho ◽  
Dina Rubiana Widarda ◽  
Oryza Herdha Dwyana
Keyword(s):  
High Speed ◽  
Tuned Mass Damper ◽  
Dynamic Responses ◽  
Mass Ratio ◽  
High Speed Train ◽  
Maximum Deformation ◽  
Mass Load ◽  
Mass Damper ◽  
Existing Bridges ◽  
Comfort Criteria

As the need of the train speed increased, the existing bridges need to be evaluated, especially in dynamic responses, which are deformation and acceleration. In this study, Cisomang Bridge is modeled and analyzed due to the high-speed train SJ X2 in varying speeds, 50 km/h, 100 km/h, 150 km/h, and 200 km/h. The used of tuned mass damper also will be varied on its setting and placing. The tuned mass dampers setting be varied based on the first or second natural frequency and the placing of tuned mass damper be varied based on maximum deformation of the first or second mode. Moreover, the tuned mass damper ratio will be varied 1% and 1.6%. For all speed variations, dynamic responses of structure without TMD still fulfil the Indonesian Government Criterion based on PM 60 - 2012 but do not meet requirement of comfort criteria based on DIN-Fachbericht 101. Furthermore, only for the speed train 50km/h dynamic responses of structure fulfil safety criteria based on Eurocode EN 1990:2002, whereas the other speed variations do not meet that requirement. In the use of TMD 1% mass ratio, the structure fulfils the safety criteria for all speed variations. In the use of TMD 1.6% mass ratio, all the structure fulfils the safety and comfort criteria except 100 km/h speed which only fulfils the safety criteria.

Estimation of Track Irregularity Based on Genetic Algorithm and Unscented Kalman Filtering

2012 ◽  
Author(s):  
Hongmei Shi ◽  
Zujun Yu
Keyword(s):  
Genetic Algorithm ◽  
Kalman Filtering ◽  
High Speed ◽  
Measurement Data ◽  
Estimation Method ◽  
Coupling Model ◽  
Dynamic Responses ◽  
The Real ◽  
True Value ◽  
Track Irregularity

Track irregularity is the main excitation source of wheel-track interaction. Due to the difference of speed, axle load and suspension parameters between track inspection train and the operating trains, the data acquired from the inspection car cannot completely reflect the real status of track irregularity when the operating trains go through the rail. In this paper, an estimation method of track irregularity is proposed using genetic algorithm and Unscented Kalman Filtering. Firstly, a vehicle-track vertical coupling model is established, in which the high-speed vehicle is assumed as a rigid body with two layers of spring and damping system and the track is viewed as an elastic system with three layers. Then, the static track irregularity is estimated by genetic algorithm using the vibration data of vehicle and dynamic track irregularity which are acquired from the inspection car. And the dynamic responses of vehicle and track can be solved if the static track irregularity is known. So combining with vehicle track coupling model of different operating train, the potential dynamic track irregularity is solved by simulation, which the operating train could goes through. To get a better estimation result, Unscented Kalman Filtering (UKF) algorithm is employed to optimize the dynamic responses of rail using measurement data of vehicle vibration. The simulation results show that the estimated static track irregularity and the vibration responses of vehicle track system can go well with the true value. It can be realized to estimate the real rail status when different trains go through the rail by this method.

Vertical vibration modelling and vibration response analysis of Chinese high-speed train passengers at different locations of a high-speed train

2020 ◽  
Vol 235 (1) ◽  
pp. 35-46 ◽  
Author(s):  
Chun-jun Chen ◽  
Chao Fang ◽  
Guo-qing Qu ◽  
Zhi-ying He
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Vibration Signal ◽  
Vertical Vibration ◽  
Response Analysis ◽  
High Speed Train ◽  
Vehicle Model ◽  
Internal Organs ◽  
Damping Coefficients ◽  
Track Irregularity

To study the vibration of a passenger's head and internal organs at different locations of a high-speed train, a 9-degrees-of-freedom (DOF) model of seated passengers is proposed in this paper, and its parameters of the damping coefficients and stiffnesses are identified. Next, the response of the head and internal organs is simulated by applying the vibrational stimulation generated by a 27-DOF vehicle model under track irregularity. Moreover, by applying the measured vibration signal, the following conclusions can be drawn: (1) the weakest response is detected at the centre of the compartment of the wagon, and a stronger response is detected at the centre of the bogie, with the rolling motion having a greater effect 1 m away from the centre of the bogie; (2) the response of the human internal organs is stronger than that of the head under stimulation with a lower frequency of less than 3 Hz, and a similar conclusion can be drawn in the range of 5 to 8 Hz. However, if the frequency is in the range between 8 and 15 Hz, the situation is entirely different. The responses of both the head and internal organs are reduced at frequencies over 20 Hz; (3) from the real application, it can be inferred that the greatest response can be detected at approximately 3 Hz for internal organs and at 8 Hz or higher for the head.

scholarly journals Effect of High-Speed Train-Induced Wind on Trackside UAV Thrust Near Railway Bridge

2020 ◽  
Vol 10 (10) ◽  
pp. 3495 ◽  
Author(s):  
Hyuk-Jin Yoon ◽  
Su-Hwan Yun ◽  
Dae-Hyun Kim ◽  
Jae Hee Kim ◽  
Bong-Kwan Cho ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Wind Velocity ◽  
High Speed ◽  
Railway Bridge ◽  
High Speed Train ◽  
Box Girder ◽  
Railway Bridges ◽  
High Speed Trains ◽  
Thrust Measurement ◽  
Girder Bridge

Imaging devices attached to unmanned aerial vehicles (UAVs) are used for crack measurements of railway bridges constructed for high-speed trains. This research aims to investigate track-side wind induced by high-speed trains and its effect on UAV thrust near the railway bridge. Furthermore, the characteristics of train-induced wind in three axial directions along a track, wind velocity, and the effect of train-induced wind on the UAV thrust were analyzed. This was achieved by installing 3-axis ultrasonic anemometers and a UAV thrust measurement system on top of a PSC box girder bridge. The changes in the train-induced wind velocity were monitored along the train travel, width, and height directions. The train-induced wind was measured at distances of 0.8, 1.3, 2.3, and 2.8 m away from the train’s body to analyze wind velocity based on distance. It was found that the maximum wind velocity decreased linearly as the distance from the train’s body increased. The UAV thrust increased by up to 20% and 60%, owing to train-induced wind when the leading and trailing power cars of a high-speed train passed, respectively. Thus, it is necessary to conduct further research to develop robust control and a variable pitch-propeller that can control thrust.

Dynamic Performance of Vehicle-Turnout-Bridge Coupling System in High-Speed Railway

2011 ◽  
Vol 50-51 ◽  
pp. 654-658
Author(s):  
Rong Chen ◽  
Wang Ping ◽  
Shun Xi Quan
Keyword(s):  
Relative Position ◽  
High Speed ◽  
Dynamic Performance ◽  
Dynamic Responses ◽  
Continuous Beam ◽  
Analysis Model ◽  
Wheel Load ◽  
System A ◽  
Coupling System ◽  
Contact Relation

In order to study dynamic behavior of vehicle-turnout-bridge coupling system, a vehicle-turnout-bridge dynamic analysis model is established by employing the dynamic finite element method (FEM). When No.18 crossover turnouts(with a speed of 350km/h) are laid symmetrically on the 6×32m continuous beam, influences of turnout/bridge relative position and wheel/rail contact relation in turnout zone on the system dynamic responses are analyzed. The result shows that: wheel/rail contact of turnout zone (especially the frog) has great effect on dynamic responses of turnout on bridge, thus the nose rail height of frog should be optimized to mitigate the wheel load transition and its longitudinal gradient. In terms of the 32m-span continuous beam, the best relative position is frog part of turnout arranged in the range of 1/8 and 1/4 of span.

scholarly journals Dynamic Analysis of an Existing Arch Railway Bridge According to Eurocodes

2016 ◽  
Vol 62 (4) ◽  
pp. 99-118 ◽  
Author(s):  
R. Oleszek ◽  
W. Radomski
Keyword(s):  
Dynamic Analysis ◽  
Modal Analysis ◽  
Structural Dynamics ◽  
High Speed ◽  
Bending Moments ◽  
Railway Bridge ◽  
High Speed Train ◽  
Arch Bridge ◽  
Railway Bridges ◽  
Structural Solutions

AbstractModern regulations concerning railway bridges are based on the approach of structural dynamics, which is described in PN-EN standards. This paper presents the results of theoretical dynamic analysis of the HSLM-A train set loading on the structure of a pre-stressed concrete arch bridge - the first railway bridge of its type which was built in Poland (completed in 1959). The recommendations of PN-EN have been followed and modal analysis was carried out to define the sensitivity of the structure to chosen eigenforms. Additionally the paper presents a course of calculations and the conclusions obtained from the analysis of displacements, accelerations, and bending moments induced in the structure through a simulated passage of a high-speed train in the context of the requirements of PN-EN Standards. The conclusions from the current calculations can be used for dynamic analysis of bridges of similar structural solutions.

Sign in / Sign up

Export Citation Format

Share Document